Nokia NIF4107000 - Luna VPN Accelerator Card for IP330



  • I just picked up one of these cards for a total of 25 bucks.  :)  Is anyone else using this card for their IP330's?  Curious if this would even be compatible with pfsense?

    Model # NIF4107000



  • If its broadcom, it appears to be supported.  When I get the card, perhaps the card itself will give some clues.

    3.13 Cryptographic Accelerators

    Accelerators based on the Hifn 7751, 7811, or 7951 chipsets ( hifn(4) driver)

    *

    Invertex AEON
        *

    Hifn 7751 reference board
        *

    Global Technologies Group PowerCrypt and XL-Crypt
        *

    NetSec 7751
        *

    Soekris Engineering vpn1201 and vpn1211

    Accelerators based on the Bluesteel 5501 or 5601 chipsets ( ubsec(4) driver)

    Accelerators based on the Broadcom BCM5801, BCM5802, BCM5805, BCM5820, BCM 5821, BCM5822 chipsets ( ubsec(4) driver)



  • @Sifter:

    I just picked up one of these cards for a total of 25 bucks.  :)  Is anyone else using this card for their IP330's?  Curious if this would even be compatible with pfsense?

    Model # NIF4107000

    No idea myself - but $25 is bloody cheap for a cPCI card.  I've noticed a new T1 card for $1200 US on ebay.

    If you come across another NIC (even a single one) then that'd be great.  Otherwise I'll go play with VLANs….

    On a related note, does anyone know how to hack a managed alcatel omniswitch ?  I got four dirt cheap, but no docs and no passwords.



  • There are chances your switches have a backdoor depending on the firmware they run: http://xforce.iss.net/xforce/xfdb/10664



  • @hoba:

    There are chances your switches have a backdoor depending on the firmware they run: http://xforce.iss.net/xforce/xfdb/10664

    That one did not apply to me, but this one looks like it should work:  http://www.mreriksson.net/faqs/omnistack/   (down the bottom part)

    CONFIRMED - I sucessfullty removed the admin password from my managed alcatel omnistack omniswitch 4024.  I also learned how to reset the switch's IP from the default.  Next I have to learn VLANs and plug it into my OPT ports.



  • Ok I just got the LUNA VPN card.  It is brand new/sealed in the packaging still.  The chips on the card are:

    hifn 7711PT6 /3 
    JAPAN 9945FAI
    B0324AAD

    QuickLogic 0021  CA
    QL3025
    -1PQ208C

    AMCC
    PCI MATCHMAKER
    S5920Q
    0020 A024
    TAIWAN

    StrongARM
    21281EB
    L0231223
    INTEL 1997

    I see hifn on the compatability chart, but not specifically the 7711PT6 model.



  • It should display a cryptocard at system>status if found. Let us know if it works.



  • I get the following when I boot the system.

    pci0: <encrypt decrypt,="" entertainment="" crypto="">at device 17.0 (no driver attached)

    Any ideas?</encrypt>



  • @Sifter:

    I get the following when I boot the system.

    pci0: <encrypt decrypt,="" entertainment="" crypto="">at device 17.0 (no driver attached)

    Any ideas?</encrypt>

    Sounds like it's not supported by FreeBSD.



  • @Sifter:

    pci0: <encrypt decrypt,="" entertainment="" crypto="">at device 17.0 (no driver attached)</encrypt>

    Entertainment crypto? Maybe you can now watch movies with your nokia  ;D



  • @sullrich:

    @Sifter:

    I get the following when I boot the system.

    pci0: <encrypt decrypt,="" entertainment="" crypto="">at device 17.0 (no driver attached)

    Any ideas?</encrypt>

    Sounds like it's not supported by FreeBSD.

    So even tho freebsd sees it as a crypto card, freebsd doesnt have a valid driver for it?



  • Either that or its not routing an irq correctly.

    Check the FreeBSD 6.1 hardware release compatibility list.



  • There is another encryption card on ebay like the one above if anyone wants to grab it for testing.

    http://cgi.ebay.com/Nokia-NIF4107-VPN-Luna-Accelerator-Card-for-IP330_W0QQitemZ9731660302QQcategoryZ51167QQssPageNameZWDVWQQrdZ1QQcmdZViewItem


Log in to reply