Navigation

    Netgate Discussion Forum
    • Register
    • Login
    • Search
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search

    IPSEC Tunnel Active but not working ?!

    IPsec
    2
    3
    1022
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • D
      dattik last edited by

      Hi,

      I have a problem with a simple IPSEC Tunnel; my pfsenses are displaying the status of the tunnel as Active, but pings are not working at all..

      • I tried to reboot both of my pfsense but nothing changed.
      • I deleted the VPN and re-created it, but nothings changed again.
      • I also guarantee that the configuration of my VPN on both pfsense is exactly the same.

      Concerning the IP Configuration :
      PFSense01 =
      LAN : 10.32.71.254/21
      WAN : 51.xx.xx.220/32

      PFSense02 =
      LAN : 10.32.79.254/21
      WAN : 87.xx.xx.142/32

      From pfsense01, when I'm trying to ping the other pfsense (10.32.79.254), I have 100% loss :/
      And same result if I test a ping from pfsense02 to pfsense01…

      ============


      IPSEC Tunnel status in the homepage :

      pfsense01 :

      pfsense02 :

      –--

      VPN - IPsec Configuration View :

      pfsense01 :

      pfsense02 :

      –--

      IPsec Status :

      pfsense01 :

      pfsense02 :

      –--

      Firewall IPsec Rule :

      On both pfsenses :

      –--

      Last IPsec System Logs :

      pfsense01 :

      pfsense02 :

      –--

      Could someone help me plz ?

      Thx for reading !

      1 Reply Last reply Reply Quote 0
      • D
        dattik last edited by

        It looks to work now.

        I changed the NICs to E1000E.
        I restarted the service like 10-15, until it works.

        And I also make differents cron to initiate some ping every minute through the tunnel.

        Everything is fine currently. Will post here if I meet a problem again.

        1 Reply Last reply Reply Quote 0
        • G
          gui.ap last edited by

          Hello, I have a similar problem with 2.3.3 version, on pfsense 2.1.5 works fine.

          What is your pfsense version?

          I'm running the pfsense into  a xenserver 7.0.

          1 Reply Last reply Reply Quote 0
          • First post
            Last post