EZIO Driver for LCDproc

stephenw10

Same here. The 2.5 package builders may not be running right now. Other priorities with 2.4.5 issues.

@MXNPD Check /dev for new devices when you attach it. Check the system log or dmesg for errors if you don't see a new device. I would expect it to be on /dev/cuaU0 though. Unless you have other USB com ports.

Steve

Smoothrunnings

@kiokoman said in EZIO Driver for LCDproc:

@MXNPD try all available ports

anyway @stephenw10
it''s not available for my 2.5.0. only for 2.4.5
2.5.0 is still on LCDproc sysutils 0.10.8_4 for me

2.5.0 is a dev firewall, why would you run something that is dev in protection (aka beta)??

Thanks,

stephenw10

I mean there are reasons you might want to do that, obviously not recommended though.

But this was just commenting that the package had not been built for 2.5 yet. I assume the patch was developed and tested on 2.5 first in this instance.

Steve

kiokoman

indeed @Smoothrunnings, all the patch and dev must be done on the dev version of pfsense aka 2.5.0, they then decide if and when to port it to the other version, i can't submit a patch directly to 2.4.5. that's why i was saying that, the patch was intended for 2.5.0 not for 2.4.5 but they decided to port and buld it for 2.4.5 before 2.5.0.

stephenw10

It's in the 2.5 dev source, the package builders just haven't run yet.

kiokoman

yes i understand, i was just explaining to him why i brought up version 2.5 in this discussion

pulsecity

Hi all,

I tried the updated package out I'm running 2.4.5 on a Smoothwall S4, however it seems unable to write the config file, as it never appears. I created the config file /usr/local/etc/LCDd.conf manually and was still unable to start the service. I then modified /usr/local/pkg/lcdproc.inc, line define('LCDPROC_RCFILE', '/usr/local/etc/rc.d/lcdproc.sh'); as the filesystem showed the rc file without .sh

The service then started however clearly the client is not communicating as I just have LCDPROC servrer Cli: 0 on the screen.

That's as far as I have got so far. I did previously have this working using the shellcmd method.
:|

stephenw10

Did you save both the LCD drive screens tabs in the package? Both need to have at least one thing set before the package will start.

Steve

pulsecity

@stephenw10 yes, reinstalled the package and have done the same just to make sure I am not mad. so no mods this time, same effect. Ie lcdproc server is running but no client connected.

Smoothrunnings

@kiokoman

I have mine setup just like yourself image shows, but when I run the LCDproc service is fails. Any ideas?

My SmoothWall uses the CAR-3030.

Thanks,

kiokoman

check system log

try from console to run

/usr/local/sbin/LCDd -c /usr/local/etc/LCDd.conf -u nobody

if it starts the next step is to run

/usr/local/bin/php -f /usr/local/pkg/lcdproc_client.php

report any error

stephenw10

Yeah, check the logs, what errors it it showing?

What exactly do you mean by the service fails?

Steve

pulsecity

I still have the issue too. GUI doesn't save config file, if I manually create the config file and ssh to start the services they work. Init name looks wrong to me one in PHP or Inc has .sh and my box didn't or might have been the other way round. Ages since I looked, but as the package was prepared for Dev but released on stable, their might be differences.

kiokoman

i can't reproduce it, if i delete /usr/local/etc/LCDd.conf on my 2.4.5-p1 it is created again if i press "save"

pulsecity

I will have another play maybe tonight. And check what happens on mine again. Because my memory is a bit vague

DV0381

In the version 2.4.5-RELEASE-p1 it's built in!!! :-)

LCD_ABE_200_Ver002.png

pulsecity

Been a long time since I went in the loft, the /usr/local/etc/LCDd.conf is never created when pressing save.

System Log says:

Nov 25 12:43:06 php-fpm 56811 lcdproc: Sync: Begin package sync
Nov 25 12:43:06 php-fpm 56811 lcdproc: The selected COM port is not valid!

The same port works fine when I manually create the file and start it with the following, so it's just GUI issues.

/usr/bin/nice -20 /usr/local/sbin/LCDd -c /usr/local/etc/LCDd.conf -u nobody
/usr/bin/nice -20 /usr/local/bin/lcdproc -c /usr/local/etc/lcdproc.conf
/usr/bin/nice -20 /usr/local/bin/lcdexec -c /usr/local/etc/lcdexec.conf

I've now removed gui package and just edit the conf files manually :(

stephenw10

What com port are you trying to set? Does it exist in /dev?

Steve

pulsecity

@stephenw10 /dev/cuau1 yes its in dev and works fine with the config manually created and the commands run, so now I have the following in shellcmd:

/usr/bin/nice -20 /usr/local/sbin/LCDd -c /usr/local/etc/LCDd.conf -u nobody
/usr/bin/nice -20 /usr/local/bin/lcdproc -c /usr/local/etc/lcdproc.conf

/usr/local/etc/LCDd.conf looks like:

[server]
DriverPath=/usr/local/lib/lcdproc/
Driver=hd44780
Bind=127.0.0.1
Port=13666
ReportLevel=3
ReportToSyslog=yes
User=nobody
Foreground=no
ServerScreen=no
GoodBye="Thanks for using"
GoodBye=" pfSense "
WaitTime=5
ToggleRotateKey=Enter
PrevScreenKey=Left
NextScreenKey=Right
ScrollUpKey=Up
ScrollDownKey=Down
[menu]
MenuKey=Escape
EnterKey=Enter
UpKey=Up
DownKey=Down
[hd44780]
driverpath=/usr/local/lib/lcdproc/
ConnectionType=ezio
Device=/dev/cuau1
Keypad=yes
Size=16x2
KeyMatrix_4_1=Enter
KeyMatrix_4_2=Up
KeyMatrix_4_3=Down
KeyMatrix_4_4=Escape

stephenw10

Can we see a screenshot of the exact settings you're trying to enter in the package?

Is it possible your browser is auto-filling hidden fields?

Steve