Multiple WAN blocks on single interface
klubar last edited by
We just installed a new fiber circuit to our pfsense; the info the fiber carrier gave us was:
Customer layer 3 IP information:
Link IP Address: 126.96.36.199/29
Customer Layer 3 IPs: 188.8.131.52 – 184.108.40.206
Customer Usable IP Information
Usable IP Block: 220.127.116.11/26
Customer Usable Static IPs: 18.104.22.168 – 22.214.171.124
What is the best way to set this up in pfsense?
Currently I set up the interface using the customer layer 126.96.36.199/29 block and added a static route for the block: 188.8.131.52/26. Is this correct?
dotdash last edited by
- If they are routing the main block via the transit block, you should be able to just add virtual IPs from the second block.
- You might want to consider obfuscating the first octet or two of your IPs.