Intel X553 NICs (on C3758 SoC) not detected by pfSense 2.4/2.4.1
-
Hi Iovr
Is it stable in the factory installations?
-
We have not seen any stability issues on the particular hardware in the XG-7100, which is where we've tested it.
Steve
-
@bendroid I have a ZFS filesystem as well. I had to do
zfs set readonly=off zroot/ROOT/defaultand was able to mv files around. After making the changes, the property can be reset to default using,
zfs inherit readonly zroot/ROOT/defaultThe pool properties out of the box are as follows (for reference),
NAME PROPERTY VALUE SOURCE zroot type filesystem - zroot mounted yes - zroot quota none default zroot reservation none default zroot recordsize 128K default zroot mountpoint /zroot local zroot sharenfs off default zroot checksum on default zroot compression lz4 local zroot atime off local zroot devices on default zroot exec on default zroot setuid on default zroot readonly off default zroot jailed off default zroot snapdir hidden default zroot aclmode discard default zroot aclinherit restricted default zroot canmount on default zroot xattr off temporary zroot copies 1 default zroot version 5 - zroot utf8only off - zroot normalization none - zroot casesensitivity sensitive - zroot vscan off default zroot nbmand off default zroot sharesmb off default zroot refquota none default zroot refreservation none default zroot primarycache all default zroot secondarycache all default zroot usedbysnapshots 0 - zroot usedbydataset 88K - zroot usedbychildren 399M - zroot usedbyrefreservation 0 - zroot logbias latency default zroot dedup off default zroot mlslabel - zroot sync standard default zroot refcompressratio 1.00x - zroot volmode default default zroot filesystem_limit none default zroot snapshot_limit none default zroot filesystem_count none default zroot snapshot_count none default zroot redundant_metadata all default -
@trumee Thank you alot, but I circumvented that issue with using developer builds. It's stable anough for my home and you get to try new fancy features. If you don't havea productive environment, I can only recommend going with the developer builds.
-
Did 2.4.4-snapshot already have the driver for X553 NICs of C3000 series from FreeBSD 11-stable/11.2-Release?
-
Current 2.4.4 snapshots are built on FreeBSD 11.2-RC3. You should test one if you can The more testing they see the faster we can find any issues such as drivers not working with your hardware.
Steve
-
@abcnew said in Intel X553 NICs (on C3758 SoC) not detected by pfSense 2.4/2.4.1:
Did 2.4.4-snapshot already have the driver for X553 NICs of C3000 series from FreeBSD 11-stable/11.2-Release?
Yes, I have just installed the latest Devel Version (pfSense-CE-memstick-2.4.4-DEVELOPMENT-amd64-latest) on a SuperServer 5019A-FTN4 and the network interfaces are working.
-
Is there a safe upgrade path from 2.4.4-snapshot to release version?
-
Yes, it should be a direct upgrade from a snap to stable once 2.4.4 is released. Just set the repo back to 'latest stable'.
However if you cannot afford the downtime of reinstalling you perhaps shouldn't be running a snapshot.
Steve
-
@stephenw10 I changed the system to 2.4.4 snapshots and received the following errors on first boot,
Crash report begins. Anonymous machine information: amd64 11.2-RELEASE FreeBSD 11.2-RELEASE #28 79c8a561b61(RELENG_2_4_4): Tue Jul 3 17:47:49 EDT 2018 root@buildbot3:/builder/ce-master/tmp/obj/builder/ce-master/tmp/FreeBSD-src/sys/pfSense Crash report details: PHP Warning: PHP Startup: Unable to load dynamic library '/usr/local/lib/php/20131226/mbstring.so' - Shared object "libonig.so.4" not found, required by "mbstring.so" in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library '/usr/local/lib/php/20131226/intl.so' - Shared object "libicui18n.so.60" not found, required by "intl.so" in Unknown on line 0The zpool is missing some feature flags. Not sure whether this was the case with 2.4.3,
$zpool status pool: zroot state: ONLINE status: Some supported features are not enabled on the pool. The pool can still be used, but some features are unavailable. action: Enable all features using 'zpool upgrade'. Once this is done, the pool may no longer be accessible by software that does not support the features. See zpool-features(7) for details. scan: none requested config: NAME STATE READ WRITE CKSUM zroot ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 ada0p4 ONLINE 0 0 0 ada1p4 ONLINE 0 0 0 errors: No known data errors $zpool upgrade This system supports ZFS pool feature flags. All pools are formatted using feature flags. Some supported features are not enabled on the following pools. Once a feature is enabled the pool may become incompatible with software that does not support the feature. See zpool-features(7) for details. POOL FEATURE --------------- zroot device_removal obsolete_counts zpool_checkpoint -
If you clear that and reboot do you see it again?
If not it was probably just temporary during the upgrade when those php libs are updated.Steve
