Watchguard Firebox M400/M500
-
@DeLorean
hello, everyone, I'm new here. can someone tell me why we can WatchGuard m200 box for Pfsense? here is what I have found so far on m200 so far
-
You mention M200, but the specs are from the M270 model.
The M200 from Watchguard can't be used for pfSense, I have tried this.
The M200 has no mSata slot, but a SD memorycard slot with a 8Gb SD card and no other option to expand the storage,
and use a U-loader from Watchguard to load the OS.
The only thing that was changeable on this model was the Ram memory.
The M200 use a Freescale T1042 CPU , while the M270 use a Intel Atom C (formerly known as Denverton) cpu.Grtz
DeLorean -
Hey DeLorean.. Good to see ya.
-
Yeah. M270 => probably quite easy to load and run pfSense, though I'm not sure anyone has tried. M200 => no chance!
Steve
-
@iJay-XTM5 said in Watchguard Firebox M400:
I'm going to be brave and see what it takes to update the microcode within the bios!
Maybe You Need to add microcode to the BIOS.
The original BIOS (Ver. WD0 10/08/2014) contains microcode for the following CPU ID's:- 06C3 (Date: 2013/08/16)
- 06C2 (Date: 2012/10/17)
- 06C1 (Date: 2012/06/14)
If your XEON CPU has another ID it will probably not work. Then you need to add the missing microcode.
If you just want to update the existing microcode, google for "UBU" and "BIOS". Check the link in Win-Raid Forum. This tool is simple to use and let's you update the microcode easily.
I think you can also use it to add microcode, but I haven't done that.
Another method you find here: http://wp.xin.at/archives/4397BTW: you could try to flash my BIOS with an updated Microcode for CPU ID 06C3 from 2018/04/02. See Watchguard Firebox M400
-
Has anyone been able to confirm if PC3-14900E memory (aka DDR3-1866 unbuffered ECC) will work with the M400 / Lanner FW-7585 ?
Many thanks ! -
I upgraded my M400 with an i3-4160 over the weekend. It works fine. Temperatures unchanged at idle. Much faster.
But it no longer reboots. It still shuts down though. I'm running Zanthos' BIOS.
Anyone else seen that? Haven't played with too many settings yet.
Steve
-
@stephenw10
I have seen this behaviour a few times on some of the XTM 5 Series devices, when using a E5800 cpu.
After placing back the original cpu (Celeron 440), the firewall reboots and shuts down perfect.
When i used a E8500 cpu, the firewall also reboots fine and shuts down perfectly.
Also when the E5800 cpu was used, when accessing the BIOS, when choosing exit, the firewall freezes.
This behaviour was with the original BIOS and with the unlocked BIOS.
When i finally replaced the BIOS chip, the firewall reboots and shuts down perfect with the E5800 cpu.
I'm not completely sure what the exact problem is, but i suspect a Revision of BIOS chip that doesn't like another cpu.
I have rebuild over 80 XTM 5 Serie firewalls the past 4 years, and seen this behaviour only twice.Grtz
DeLorean -
Over 80! Wow. You got me beat by at least 79 then.
This works perfectly in every other respect just hangs when it should reboot. It's annoying as I update 2.5 snaps on that almost every day. It could easily just be a bios setting. I know others have used the 4130 without issue.
Steve
-
@Mookatroid said in Watchguard Firebox M400:
Has anyone been able to confirm if PC3-14900E memory (aka DDR3-1866 unbuffered ECC) will work with the M400 / Lanner FW-7585 ?
Many thanks !UPDATE - Sept 17,2019 - spoke with Lanner. They report that 14900E should work fine. The RAM will simply clock down from 1866 to 1600. Good enough for me as 14900E is currently less expensive than 12800E around these parts, so I've now ordered 2pcs x 8GB ... with my fingers crossed. Please stand by.
-
@Mookatroid said in Watchguard Firebox M400:
@Mookatroid said in Watchguard Firebox M400:
Has anyone been able to confirm if PC3-14900E memory (aka DDR3-1866 unbuffered ECC) will work with the M400 / Lanner FW-7585 ?
Many thanks !UPDATE - Sept 17, 2019 - spoke with Lanner. They report that 14900E should work fine. The RAM will simply clock down from 1866 to 1600. Good enough for me as 14900E is currently less expensive than 12800E around these parts, so I've now ordered 2pcs x 8GB ... with my fingers crossed. Please stand by.
UPDATE - Sept 21, 2019 - all good ! 2 x 8GB 14900E installed and running perfectly. :)
To be specific they are labelled as HP spares 712288-581
Micron MT18JSF1G72AZ-1G9E1ZE 8GB 2RX8 PC3-14900E-13-13-E3 -
Hey Zanthos,
I have been able to acquire the latest BIOS file for Lanner's FW-7585 unit.
This BIOS has a build date of 20190624.
If you feel this would be of use to you and/or this community on the WatchGuard M400/M500 DIY project front, please let me know and we can ramp up a plan to share :)
With that said, I'm not sure if the reference Lanner BIOS can be/should be applied directly to an M400/M500 unit or if WatchGuard's version of the FW-7585 has had too many custom mods put into place to consider such a theory.
Either way, please let me know your thoughts when you have a moment.
Mucho thanko !
:) -
@Mookatroid I'd be interested in looking at the bios if you could upload it somewhere. Despite several emails to Lanner, I never got a response back from them.
-
@zanthos said in Watchguard Firebox M400:
@iJay-XTM5 said in Watchguard Firebox M400:
I'm going to be brave and see what it takes to update the microcode within the bios!
Maybe You Need to add microcode to the BIOS.
The original BIOS (Ver. WD0 10/08/2014) contains microcode for the following CPU ID's:- 06C3 (Date: 2013/08/16)
- 06C2 (Date: 2012/10/17)
- 06C1 (Date: 2012/06/14)
If your XEON CPU has another ID it will probably not work. Then you need to add the missing microcode.
If you just want to update the existing microcode, google for "UBU" and "BIOS". Check the link in Win-Raid Forum. This tool is simple to use and let's you update the microcode easily.
I think you can also use it to add microcode, but I haven't done that.
Another method you find here: http://wp.xin.at/archives/4397BTW: you could try to flash my BIOS with an updated Microcode for CPU ID 06C3 from 2018/04/02. See Watchguard Firebox M400
I was unsuccessful in getting the M400 to boot with the low power Xeon, with the original bios or patched with a microcode update using MMtools. The Celeron continues to boot happily while the Xeon still continues with the 4 beeps of death!
I found an alternate explanation for the beeps in the Aptio 4.x Status Codes document. The DXE beep codes list says 4 beeps means "Some of the Architectural Protocols are not available". I assume this means the board is unable to provide the low voltage levels required by the Xeon. -
@iJay-XTM5
I assume we will need to activate a chat here to exchange the Lanner BIOS file as a PM feature does not seem to exist.
However, with that said, further chats with Lanner did reveal that the FW-7585 does not officially support any Xeon CPUs. Only i3, i5, i7. They would not say if the FW-7585 unofficially supports Xeon, but the datasheet for the FW-7585 does not list Xeon options at all. So ... this "gift" of Xeon support may end up being a mod they did only for the WatchGuard build.
I have an E3-1265Lv3 on the way, so fingers crossed one way or another.
Let me know if you would still like the Lanner BIOS file. :) -
@Mookatroid Yes, I would like to get a copy of the bios please! I've never used the chat feature; hopefully it isn't going to be too difficult. Good luck with your xeon transplant, I suspect the 1265Lv3 will not be as troublesome as the 1220L.
-
@Mookatroid
Hi Mookatroid
Thanks for getting the BIOS file. I'm very much interested. I can also mod the BIOS again with the latest Microcode patches, UEFI drivers, default settings and so on.
It will take a while, during October I probably won't have time to do it. -
@iJay-XTM5
I dropped a link into a chat for you :)
-
@zanthos
Hey Zanthos,
I dropped the link into a chat with you.
Please let me know when you download it OK and keep me posted on your mod'ing efforts.
Many thanks ! -
Does anyone know what the fan noise is like in comparison to a Dell R210/220?
