[Solved] Installing NanoBSD 2.3.5 on WatchGuard X700 error

[m4f1050]

I am getting this error over and over:

(ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 af 1f 3c 40 00 00 00 00 01 00
(ada0:ata0:0:0:0): CAM status: Command timeout
(ada0:ata0:0:0:0): Retrying command
ata0: DMA limited to UDMA33, controller found non-ATA66 cable
(ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 af 1f 3c 40 00 00 00 00 01 00
(ada0:ata0:0:0:0): CAM status: Command timeout
(ada0:ata0:0:0:0): Retrying command
ata0: DMA limited to UDMA33, controller found non-ATA66 cable
(ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 af 1f 3c 40 00 00 00 00 01 00
(ada0:ata0:0:0:0): CAM status: Command timeout
(ada0:ata0:0:0:0): Retrying command
ata0: DMA limited to UDMA33, controller found non-ATA66 cable
(ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 af 1f 3c 40 00 00 00 00 01 00
(ada0:ata0:0:0:0): CAM status: Command timeout
(ada0:ata0:0:0:0): Error 5, Retries exhausted
ata0: DMA limited to UDMA33, controller found non-ATA66 cable

Any suggestions?

[m4f1050]

Never mind, found the solution.

https://forum.pfsense.org/index.php?topic=23903.0

[ptt]

Check: https://doc.pfsense.org/index.php/Boot_Troubleshooting

[Grimson]

https://doc.pfsense.org/index.php/PfSense_on_Watchguard_Firebox