Ports will not open
-
the test on deluge reports not open, never done that before.
-
For all 1000 ports? Can we see the result?
Steve
-
For all 1000 ports? Can we see the result?
Steve
All I see is the yellow ! and not a green dot Steve
https://forum.pfsense.org/index.php?action=dlattach;topic=147958.0;attach=118139;image -
@Darkvodka34:
the test on deluge reports not open, never done that before.
That test is probably crap, trying to connect to those ports via the LAN interface. You need to test from the WAN. Read here: https://doc.pfsense.org/index.php/Port_Forward_Troubleshooting
-
@Darkvodka34:
the test on deluge reports not open, never done that before.
That test is probably crap, trying to connect to those ports via the LAN interface. You need to test from the WAN. Read here: https://doc.pfsense.org/index.php/Port_Forward_Troubleshooting
I have read that page and done it before which works fine and deluge says it works fine. only thing new is this new gateway (10.0.1.1)
If I add th server back on the default gateway 10.0.0.1 and just change the IP on the nat rule deluge passes it as worked and my speed goes up, I put it back on 10.0.1.1 and just the nat ip again fails and speed goes down. -
@Darkvodka34:
only thing new is this new gateway (10.0.1.1)
New gateway? You mean an additional LAN network? I guess it's time you post screenshots from your complete interface and firewall setup.
-
Why are you forwarding 1000 ports but only have the torrent client listening on 1?
And that screenshot still shows the wrong port for the current forwarded range. I assume you have updated that?
Steve
