Frequent internet loss - need help figuring out where and why? Maybe pfSense, Modem, ISP, or all 3?
-
According to Interfaces > Status my WAN MTU is 1500 currently. I have not modified it so I assume it's using whatever it got from DHCP or default.
I do get some lines like that (which look like it has the IP of either the ISP's gateway or ISP's DHCP server, unsure which) as well as my modem IP at times. I didn't think much of it because sometimes I see that and its still working fine until it starts getting the interface up-down.
Here's a snip from dmesg from when it finished booting until when it died one of the times if that helps.
re0 = WAN
re1 = LAN
Others = VLANS or OpenVPNOrigin="GenuineIntel" Id=0x406c3 Family=0x6 Model=0x4c Stepping=3 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x101<LAHF,Prefetch> Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics padlock0: No ACE support. aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard re1: link state changed to DOWN vlan0: changing name to 're1.2' vlan1: changing name to 're1.3' re0: link state changed to DOWN re1: link state changed to UP re1.2: link state changed to UP re1.3: link state changed to UP re0: link state changed to UP tun1: changing name to 'ovpns1' ovpns1: link state changed to UP tun2: changing name to 'ovpns2' ovpns2: link state changed to UP pflog0: promiscuous mode enabled re0: link state changed to DOWN re0: link state changed to UP arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 192.168.100.1 on re0 arpresolve: can't allocate llinfo for 192.168.100.1 on re0 arpresolve: can't allocate llinfo for 192.168.100.1 on re0 arpresolve: can't allocate llinfo for 192.168.100.1 on re0 arpresolve: can't allocate llinfo for 192.168.100.1 on re0 arpresolve: can't allocate llinfo for 192.168.100.1 on re0 ovpns1: link state changed to DOWN ovpns1: link state changed to UP ovpns2: link state changed to DOWN ovpns2: link state changed to UP ovpns1: link state changed to DOWN ovpns1: link state changed to UP ovpns2: link state changed to DOWN ovpns2: link state changed to UP ugen0.5: <vendor 0x8087 product 0x07dc> at usbus0 (disconnected) ugen0.5: <vendor 0x8087 product 0x07dc> at usbus0 ugen0.5: <vendor 0x8087 product 0x07dc> at usbus0 (disconnected) ugen0.5: <vendor 0x8087 product 0x07dc> at usbus0 ugen0.5: <vendor 0x8087 product 0x07dc> at usbus0 (disconnected) ugen0.5: <vendor 0x8087 product 0x07dc> at usbus0 ugen0.5: <vendor 0x8087 product 0x07dc> at usbus0 (disconnected) ugen0.5: <vendor 0x8087 product 0x07dc> at usbus0 re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP ovpns1: link state changed to DOWN ovpns1: link state changed to UP ovpns2: link state changed to DOWN ovpns2: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP ovpns1: link state changed to DOWN ovpns1: link state changed to UP ovpns2: link state changed to DOWN ovpns2: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP ovpns1: link state changed to DOWN ovpns1: link state changed to UP ovpns2: link state changed to DOWN ovpns2: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP -
Also possibly relevant (as I read your thread) I found tips about Realtek issues and I have disabled "Hardware Checksum Offloading" though I saw no difference doing that.
-
Could you take a look at your actual DHCP lease? It will be found in /var/db/dhclient.leases.re0 Does it contain an interface-mtu field?
You might want to anonymize your WAN IP rather than posting it here.
-
@bfeitell said in Frequent internet loss - need help figuring out where and why? Maybe pfSense, Modem, ISP, or all 3?:
var/db/dhclient.leases.re0
Yes - It does look like it contains that field
lease { interface "re0"; fixed-address 74.214.49.x; option subnet-mask 255.255.255.0; option routers 74.214.49.1; option domain-name-servers 173.44.120.56,173.44.120.57; option host-name "pfSense"; option interface-mtu 576; option broadcast-address 255.255.255.255; option dhcp-lease-time 86400; option dhcp-message-type 5; option dhcp-server-identifier 65.175.141.7; renew 2 2018/10/2 14:23:45; rebind 2 2018/10/2 23:23:45; expire 3 2018/10/3 02:23:45; } lease { interface "re0"; fixed-address 74.214.49.x; option subnet-mask 255.255.255.0; option routers 74.214.49.1; option domain-name-servers 173.44.120.56,173.44.120.57; option host-name "pfSense"; option interface-mtu 576; option broadcast-address 255.255.255.255; option dhcp-lease-time 86400; option dhcp-message-type 5; option dhcp-server-identifier 65.175.141.7; renew 2 2018/10/2 15:05:05; rebind 3 2018/10/3 00:05:05; expire 3 2018/10/3 03:05:05; } [2.4.4-RELEASE][root@pfSense.apt]/root:WAN IP...eh, it changes often enough anonymizing the last bit is probably fine.
-
EDITED TO CORRECT POINTER TO CORRECT FIELD IN "Lease Requirements and Requests"
Try the fix I discussed in the prior post I referenced. You are probably hitting the same issue I saw.
"In the "Lease Requirements and Requests" section for WAN DHCP in the field "Option modifiers" add the text without quotes: "supersede interface-mtu 0""
-
I shall give that a shot! Do I need a reboot/reload after that change is made?
Probably be at least 2 weeks until I declare "fixed" but I may know sooner if it dies. Interesting that they would set such a small MTU, I've never really seen anything under 1500 used "in the wild"
-
Please report back your results, especially with regard to whether the 'arpresolve can't allocate llinfo for $GATEWAY' errors go away with the fix in place. The granted lease details won't change, but the default pfSense MTU of 1500 should be in effect after the fix.
-
Maybe I'm still missing something. I don't see that field listed where I expected it to be under Interfaces > WAN
Am I missing something? This is 2.4.4
-
Yes, scroll down a bit more. "Option modifiers" appears below in the "Lease Requirements and Requests" section.
I would reboot, but saving and applying the fix should resolve things. You can check the MTU before and after the fix at the command prompt with 'ifconfig re0'.
-
Ah, I found it as you said under the "Lease Requirements and Requests" heading. I was looking for a keyword heading "Advanced" or checkbox "Advanced". I'll do a reboot for good measure, it seems reasonable enough.
I will certainly report back either way - if it is still having problems or showing those lines or if I think it's fixed after a while.
Thanks!
-
I have edited the post above, and my prior post to reflect the correct location of "Option modifiers" in the "Lease Requirements and Requests" section.
I really think this fix needs to be documented, as the underlying problem causes all sorts of flakiness beyond DHCP renewal/ARP quirks, including the failure of certain web sites, like newyorker.com, to load.
-
Interesting note - prior to the reboot after applying that I had intermittent connectivity and odd entries in my dmesg output.
I think after a reboot it settled out but in case you are interested here is what it showed:
arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 re0: link state changed to UP arpresolve: can't allocate llinfo for 74.214.49.1 on re0 re0: link state changed to DOWN re0: link state changed to UP nd6_setmtu0: new link MTU on re0 (576) is too small for IPv6 re0: link state changed to DOWN arpresolve: can't allocate llinfo for 74.214.49.1 on re0 re0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP re0: link state changed to DOWN nd6_setmtu0: new link MTU on re0 (576) is too small for IPv6 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 re0: link state changed to UP arpresolve: can't allocate llinfo for 74.214.49.1 on re0 re0: link state changed to DOWN re0: link state changed to UP nd6_setmtu0: new link MTU on re0 (576) is too small for IPv6 re0: link state changed to DOWN re0: link state changed to UP arpresolve: can't allocate llinfo for 74.214.49.1 on re0 re0: link state changed to DOWN re0: link state changed to UP nd6_setmtu0: new link MTU on re0 (576) is too small for IPv6 re0: link state changed to DOWN arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 re0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP re0: link state changed to DOWN nd6_setmtu0: new link MTU on re0 (576) is too small for IPv6 re0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP nd6_setmtu0: new link MTU on re0 (576) is too small for IPv6 re0: link state changed to DOWN arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 re0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP nd6_setmtu0: new link MTU on re0 (576) is too small for IPv6 re0: link state changed to DOWN arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 re0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP nd6_setmtu0: new link MTU on re0 (576) is too small for IPv6 re0: link state changed to DOWN arpresolve: can't allocate llinfo for 74.214.49.1 on re0 re0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP nd6_setmtu0: new link MTU on re0 (576) is too small for IPv6 re0: link state changed to DOWN arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 re0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP nd6_setmtu0: new link MTU on re0 (576) is too small for IPv6 re0: link state changed to DOWN arpresolve: can't allocate llinfo for 74.214.49.1 on re0 re0: link state changed to UP arpresolve: can't allocate llinfo for 74.214.49.1 on re0 re0: link state changed to DOWN re0: link state changed to UP nd6_setmtu0: new link MTU on re0 (576) is too small for IPv6 re0: link state changed to DOWN arpresolve: can't allocate llinfo for 74.214.49.1 on re0AFAIK my ISP does not support IPv6 and I don't appear to have any IPv6 connectivity. I'm assuming it just got confused with changing things until it was rebooted.
-
Yes, I think this pretty clearly shows you hit this 576 MTU oddity. For my friend it broke The New Yorker website, and iHeart Radio. I was more concerned with the firewall unpredictably falling off the net. It turned out that the two problems had the same root cause of a too small MTU.
-
Not sure why the forum thinks I'm spamming posting the output of ifconfig but it does.
After a reboot its still showing ifconfig re0 with mtu 576.
Any thoughts? Maybe I need to manually enter 1500 in the WAN settings?
-
Please post a screen shot of the "Lease Requirements and Requests" as you have it filled out. If you have the supersede statement in there correctly, it may be a quirk of the (re) driver interacting with dhclient. Setting 1500 explicitly for the MTU might fix it, but I would try a cold boot after confirming you have the incantation entered correctly. In the meanwhile, I will double check how I have it set on my friend's machine...
-
Just re-re-re read your post and you said without quotes. Maybe I should have gone to bed while it was still yesterday. :)
Took out my " " from the option modifiers, rebooted AGAIN and now I see mtu 1500 in ifconfig re0!
Seems like a good sign that its at least now doing what you (and I) was expecting.
-
Excellent! Please follow up on this if it is fixed. I think that Netgate needs to put this in the formal documentation. It is a sneaky little quirk from upstream. pfSense, and dhclient are doing the right thing following the DHCP lease parameters issued, but the cable modem hardware from the ISP is giving out bad settings for setting up the connection.
-
Negative success, just had total outage tonight. Had to reboot pfsense to get it to come back online.
Origin="GenuineIntel" Id=0x406c3 Family=0x6 Model=0x4c Stepping=3 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x101<LAHF,Prefetch> Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics padlock0: No ACE support. aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard re1: link state changed to DOWN vlan0: changing name to 're1.2' vlan1: changing name to 're1.3' re0: link state changed to DOWN re1: link state changed to UP re1.2: link state changed to UP re1.3: link state changed to UP re0: link state changed to UP tun1: changing name to 'ovpns1' ovpns1: link state changed to UP tun2: changing name to 'ovpns2' ovpns2: link state changed to UP pflog0: promiscuous mode enabled ugen0.5: <vendor 0x8087 product 0x07dc> at usbus0 (disconnected) ugen0.5: <vendor 0x8087 product 0x07dc> at usbus0 re0: link state changed to DOWN re0: link state changed to UP ovpns1: link state changed to DOWN ovpns1: link state changed to UP ovpns2: link state changed to DOWN ovpns2: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP ovpns1: link state changed to DOWN ovpns1: link state changed to UP ovpns2: link state changed to DOWN ovpns2: link state changed to UP ugen0.5: <vendor 0x8087 product 0x07dc> at usbus0 (disconnected) ugen0.5: <vendor 0x8087 product 0x07dc> at usbus0 ugen0.5: <vendor 0x8087 product 0x07dc> at usbus0 (disconnected) ugen0.5: <vendor 0x8087 product 0x07dc> at usbus0 ugen0.2: <American Power Conversion Back-UPS ES 750 FW841.I3 .D USB FWI3> at usbus0 (disconnected) ugen0.2: <American Power Conversion Back-UPS ES 750 FW841.I3 .D USB FWI3> at usbus0 re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP arpresolve: can't allocate llinfo for 74.214.49.1 on re0 ovpns1: link state changed to DOWN ovpns1: link state changed to UP ovpns2: link state changed to DOWN ovpns2: link state changed to UP ugen0.5: <vendor 0x8087 product 0x07dc> at usbus0 (disconnected) ugen0.5: <vendor 0x8087 product 0x07dc> at usbus0 re0: watchdog timeout re0: link state changed to DOWN arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 re0: link state changed to UP arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 ovpns1: link state changed to DOWN ovpns1: link state changed to UP ovpns2: link state changed to DOWN ovpns2: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN arpresolve: can't allocate llinfo for 74.214.49.1 on re0 re0: link state changed to UP ovpns1: link state changed to DOWN ovpns1: link state changed to UP ovpns2: link state changed to DOWN ovpns2: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 re0: link state changed to UP arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 re0: watchdog timeout re0: link state changed to DOWN arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 re0: link state changed to UP arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 re0: watchdog timeout re0: link state changed to DOWN arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 re0: link state changed to UP arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 arpresolve: can't allocate llinfo for 74.214.49.1 on re0 re0: watchdog timeout re0: link state changed to DOWN arpresolve: can't allocate llinfo for 74.214.49.1 on re0 re0: link state changed to UP arpresolve: can't allocate llinfo for 74.214.49.1 on re0 re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN arpresolve: can't allocate llinfo for 74.214.49.1 on re0 re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP arpresolve: can't allocate llinfo for 74.214.49.1 on re0 re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP arpresolve: can't allocate llinfo for 74.214.49.1 on re0 re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP arpresolve: can't allocate llinfo for 74.214.49.1 on re0 re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN
Any other thoughts? I see my modem errors are creeping up again (tho only in the few-hundreds this time, not up to 1000 yet)
-
@mmiller7 said in Frequent internet loss - need help figuring out where and why? Maybe pfSense, Modem, ISP, or all 3?:
re0: watchdog timeout
That's a very common issue with Realtek crap NICs, you can try to use the official Realtek driver (hint: look into the Hardware section) or better yet switch to Intel NICs.
-
I agree with Grimson. The Realtek NICs can be very dodgy to work with. You should make sure that you have disabled all three of:
Hardware Checksum Offloading
Hardware TCP Segmentation Offloading
Hardware Large Receive Offloadingat the bottom of System/Advanced/Networking
The "supersede interface-mtu 0" fix remains necessary for you if you were having the arpresolve/llinfo errors and frequent drops without it. The fix is now referenced in the upgrade guide for 2.4.4 for cases where the advanced options section has been touched.
You can look through the network card tuning recommendations, and try variations on the MSI/MSIX fixes you see there by adapting them for (re) cards.
https://www.netgate.com/docs/pfsense/hardware/tuning-and-troubleshooting-network-cards.html
For example, adding something like these in /boot/loader.conf.local
net.inet.tcp.tso=0
hw.pci.enable_msix=0
hw.pci.enable_msi=0
hw.re.tso_enable=0Take a look through the forums, and you will see that many people have problems with Realtek hardware.
I hope this helps.
