No WAN IP on new PfSense Box
-
Hi Sir's,
I'm having trouble getting IP address in WAN side after installing PfSense on my new bought mini PC X30G-N2810. Here's my setup:
Modem huawei b315s-936 -> Mini PC X30G-N2810 -> Laptop (for testing)
Please help me.
-
Power cycle your modem and try again. It may be bonded to the MAC of your previous router.
-
Already did that many times, sir, still not successful. How can i spoof the mac address of my old pfsense router? transfer to this new one
-
That's probably not your issue. What do your logs say when trying to fetch an address?
-
No logs, just the wan have empty ip address. The lan have default 192.168.1.1
-
Use you laptop in place of pfsense wan and see if it works directly.
Is this dhcp? pppoe? -
@netblues Yes it works directly from modem to laptop. yes dhcp. here's my setup: MODEM------>PFSENSE WAN (no wan ip received), PFSENSE LAN------>LAPTOP
I'm using Mini PC X30G-N2810 as pfsense with 2 embeded realtek lan port!
-
Did you uncheck the Block private networks and loopback addresses in the Interfaces / WAN tab?
-
@gemrock said in No WAN IP on new PfSense Box:
@netblues Yes it works directly from modem to laptop. yes dhcp. here's my setup: MODEM------>PFSENSE WAN (no wan ip received), PFSENSE LAN------>LAPTOP
So no issue with mac address and need to spoof it too. Do a packet capture on your wan and see what is going on
-
@ronpfs sir, I can ping the pfsense default lan too. 192.168.1.1 :(
-
@netblues I can't capture packets, can't ping the 192.168.1.1 default pfsense ip
-
What do you mean "no logs"??? Status - System Logs - DHCP. All DHCP client messages are logged there. You're saying there is nothing at all?
Also, what do you mean by "I can't capture packets"??? Diagnostics - Packet Capture. The tools are there. Use them.
