Issues with 2.4.4-p1 fresh install on SG-2220



  • Hello, I have been using an SG-2220 for a few years now and saw that an update was available. After updating and rebooting, I found that everything did not return to normal. I have no idea why, but I then decided to just do a fresh install.

    I'm following the instructions found at:
    https://www.netgate.com/docs/pfsense/solutions/sg-2220/reinstall-pfsense.html

    I think I am on the right track here, but what I am seeing is different than what I would expect to see. Here is what it looks like after attempting to boot into the install usb stick:

    /boot/kernel/kernel text=0x17bfd50 data=0xb93c38+0x517b18 syms=[0x8+0x197280+0x8+0x197de9]
    Booting...
    KDB: debugger backends: ddb
    KDB: current backend: ddb
    Copyright (c) 1992-2018 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
            The Regents of the University of California. All rights reserved.
    FreeBSD is a registered trademark of The FreeBSD Foundation.
    FreeBSD 11.2-RELEASE-p4 #2 b00c407ba5d(RELENG_2_4_4): Mon Nov 26 11:41:48 EST 2018
        root@buildbot2.nyi.netgate.com:/build/ce-crossbuild-244/obj/amd64/ZfGpH5cd/build/ce-crossbuild-244/pfSense/tmp/FreeBSD-src/sys/pfSense amd64
    FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
    VT(vga): resolution 640x480
    CPU: Intel(R) Atom(TM) CPU  C2338  @ 1.74GHz (1750.04-MHz K8-class CPU)
      Origin="GenuineIntel"  Id=0x406d8  Family=0x6  Model=0x4d  Stepping=8
      Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
      Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND>
      AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
      AMD Features2=0x101<LAHF,Prefetch>
      Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
      VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
      TSC: P-state invariant, performance statistics
    real memory  = 2143150080 (2043 MB)
    avail memory = 2018426880 (1924 MB)
    Event timer "LAPIC" quality 600
    ACPI APIC Table: <CORE   COREBOOT>
    WARNING: L1 data cache covers less APIC IDs than a core
    0 < 1
    FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
    FreeBSD/SMP: 1 package(s) x 2 core(s)
    ioapic0 <Version 2.0> irqs 0-23 on motherboard
    SMP: AP CPU #1 Launched!
    Timecounter "TSC" frequency 1750043358 Hz quality 1000
    ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
    ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
    module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80680430, 0) error 1
    random: entropy device external interface
    ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
    ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
    module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff806804e0, 0) error 1
    ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
    ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
    module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80680590, 0) error 1
    iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
    iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
    module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff806a7460, 0) error 1
    iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
    iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
    module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff806a7510, 0) error 1
    iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
    iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
    module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff806a75c0, 0) error 1
    wlan: mac acl policy registered
    kbd0 at kbdmux0
    netmap: loaded module
    module_register_init: MOD_LOAD (vesa, 0xffffffff81209800, 0) error 19
    random: registering fast source Intel Secure Key RNG
    random: fast provider: "Intel Secure Key RNG"
    nexus0
    vtvga0: <VT VGA driver> on motherboard
    cryptosoft0: <software crypto> on motherboard
    padlock0: No ACE support.
    acpi0: <CORE COREBOOT> on motherboard
    acpi0: Power Button (fixed)
    hpet0: <High Precision Event Timer> iomem 0xfed03000-0xfed033ff on acpi0
    hpet0: invalid period
    device_attach: hpet0 attach returned 6
    cpu0: <ACPI CPU> on acpi0
    cpu1: <ACPI CPU> on acpi0
    hpet0: <High Precision Event Timer> iomem 0xfed03000-0xfed033ff on acpi0
    hpet0: invalid period
    device_attach: hpet0 attach returned 6
    atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
    atrtc0: registered as a time-of-day clock, resolution 1.000000s
    Event timer "RTC" frequency 32768 Hz quality 0
    attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
    Timecounter "i8254" frequency 1193182 Hz quality 0
    Event timer "i8254" frequency 1193182 Hz quality 100
    Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
    acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
    pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
    pci0: <ACPI PCI bus> on pcib0
    pcib1: <ACPI PCI-PCI bridge> mem 0xdfee0000-0xdfefffff irq 16 at device 1.0 on pci0
    pci1: <ACPI PCI bus> on pcib1
    pcib2: <ACPI PCI-PCI bridge> mem 0xdff00000-0xdff1ffff irq 19 at device 2.0 on pci0
    pci2: <ACPI PCI bus> on pcib2
    pcib3: <ACPI PCI-PCI bridge> mem 0xdff20000-0xdff3ffff irq 20 at device 3.0 on pci0
    pci3: <ACPI PCI bus> on pcib3
    pcib4: <ACPI PCI-PCI bridge> mem 0xdff40000-0xdff5ffff irq 23 at device 4.0 on pci0
    pci4: <ACPI PCI bus> on pcib4
    pci0: <base peripheral, IOMMU> at device 15.0 (no driver attached)
    igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0x1000-0x101f mem 0xdff60000-0xdff7ffff,0xdffe0000-0xdffe3fff irq 18 at device 20.0 on pci0
    igb0: Using MSIX interrupts with 3 vectors
    igb0: Ethernet address: 00:08:a2:0b:99:a0
    igb0: Bound queue 0 to cpu 0
    igb0: Bound queue 1 to cpu 1
    igb0: netmap queues/slots: TX 2/1024, RX 2/1024
    igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0x1020-0x103f mem 0xdff80000-0xdff9ffff,0xdffe4000-0xdffe7fff irq 19 at device 20.1 on pci0
    igb1: Using MSIX interrupts with 3 vectors
    igb1: Ethernet address: 00:08:a2:0b:99:a1
    igb1: Bound queue 0 to cpu 0
    igb1: Bound queue 1 to cpu 1
    igb1: netmap queues/slots: TX 2/1024, RX 2/1024
    igb2: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0x1040-0x105f mem 0xdffa0000-0xdffbffff,0xdffe8000-0xdffebfff irq 20 at device 20.2 on pci0
    igb2: Using MSIX interrupts with 3 vectors
    igb2: Setup of Shared code failed
    device_attach: igb2 attach returned 6
    igb2: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0x1060-0x107f mem 0xdffc0000-0xdffdffff,0xdffec000-0xdffeffff irq 21 at device 20.3 on pci0
    igb2: Using MSIX interrupts with 3 vectors
    igb2: Setup of Shared code failed
    device_attach: igb2 attach returned 6
    ehci0: <Intel Avoton USB 2.0 controller> mem 0xdfff1400-0xdfff17ff irq 22 at device 22.0 on pci0
    usbus0: EHCI version 1.0
    usbus0 on ehci0
    usbus0: 480Mbps High Speed USB v2.0
    ahci0: <Intel Avoton AHCI SATA controller> port 0x10c0-0x10c7,0x10e0-0x10e3,0x10c8-0x10cf,0x10e4-0x10e7,0x1080-0x109f mem 0xdfff0000-0xdfff07ff irq 23 at device 23.0 on pci0
    ahci0: AHCI v1.30 with 4 3Gbps ports, Port Multiplier not supported
    ahcich0: <AHCI channel> at channel 0 on ahci0
    ahcich1: <AHCI channel> at channel 1 on ahci0
    ahcich2: <AHCI channel> at channel 2 on ahci0
    ahcich3: <AHCI channel> at channel 3 on ahci0
    ahci1: <Intel Avoton AHCI SATA controller> port 0x10d0-0x10d7,0x10e8-0x10eb,0x10d8-0x10df,0x10ec-0x10ef,0x10a0-0x10bf mem 0xdfff0800-0xdfff0fff irq 16 at device 24.0 on pci0
    ahci1: AHCI v1.30 with 2 6Gbps ports, Port Multiplier not supported
    ahcich4: <AHCI channel> at channel 0 on ahci1
    ahcich5: <AHCI channel> at channel 1 on ahci1
    isab0: <PCI-ISA bridge> at device 31.0 on pci0
    isa0: <ISA bus> on isab0
    orm0: <ISA Option ROM> at iomem 0xc0000-0xc0fff on isa0
    ppc0: cannot reserve I/O port range
    uart0: <16550 or compatible> at port 0x3f8 irq 4 on isa0
    uart1: <16550 or compatible> at port 0x2f8 irq 3 flags 0x10 on isa0
    uart1: console (115200,n,8,1)
    est0: <Enhanced SpeedStep Frequency Control> on cpu0
    est1: <Enhanced SpeedStep Frequency Control> on cpu1
    Timecounters tick every 1.000 msec
    ugen0.1: <Intel EHCI root HUB> at usbus0
    uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
    uhub0: 8 ports with 8 removable, self powered
    ugen0.2: <vendor 0x8087 product 0x07db> at usbus0
    uhub1 on uhub0
    uhub1: <vendor 0x8087 product 0x07db, class 9/0, rev 2.00/0.02, addr 2> on usbus0
    uhub1: 4 ports with 4 removable, self powered
    ugen0.3: <Generic Ultra Fast Media> at usbus0
    umass0 on uhub1
    umass0: <Generic Ultra Fast Media, class 0/0, rev 2.00/1.98, addr 3> on usbus0
    ugen0.4: <Unknown > at usbus0 (disconnected)
    ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
    ada0: <G2242 O0529A> ACS-2 ATA SATA 3.x device
    ada0: Serial Number 1706002401099
    ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
    ada0: Command Queueing enabled
    ada0: 57241MB (117231408 512 byte sectors)
    Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]...
    da0 at umass-sim0 bus 0 scbus6 target 0 lun 0
    da0: <Generic Ultra HS-COMBO 1.98> Removable Direct Access SCSI device
    da0: Serial Number 000000225001
    da0: 40.000MB/s transfers
    da0: 3616MB (7405568 512 byte sectors)
    da0: quirks=0x2<NO_6_BYTE>
    mountroot: waiting for device /dev/ufs/FreeBSD_Install...
    Mounting from ufs:/dev/ufs/FreeBSD_Install failed with error 19.
    
    Loader variables:
      vfs.root.mountfrom=ufs:/dev/ufs/FreeBSD_Install
      vfs.root.mountfrom.options=ro,noatime
    
    Manual root filesystem specification:
      <fstype>:<device> [options]
          Mount <device> using filesystem <fstype>
          and with the specified (optional) option list.
    
        eg. ufs:/dev/da0s1a
            zfs:tank
            cd9660:/dev/cd0 ro
              (which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /)
    
      ?               List valid disk boot devices
      .               Yield 1 second (for background tasks)
      <empty line>    Abort manual input
    
    mountroot>
    panic: mountroot: unable to (re-)mount root.
    cpuid = 1
    KDB: enter: panic
    [ thread pid 1 tid 100002 ]
    Stopped at      kdb_enter+0x3b: movq    $0,kdb_why
    

    Not sure what I am doing wrong. Any pointers on how to proceed? Is there any additional information I can provide?




  • Rebel Alliance Developer Netgate

    First thing to try is a different USB stick and/or a different USB port. The error suggests that it is unable to mount the installation media, so it's likely a problem with that. Might be some combination of that particular memstick+port that FreeBSD doesn't care for on that hardware.


Log in to reply