Qwanacks again….



  • Sorry for posting again on this. I've run the shape wizard with the following setup:

    pfsense 1.2.2
    1 wan
    1 lan
    lan connects to switch that serves 5 ap
    dhcp enabled
    all ap have static ip
    up:500 mbits
    down:11000 mbits

    this is just to serve internet

    In traffic shapper, I've enabled p2pcatch all. traffic for p2p 100/up, 1000/down.

    http/s, dns and icmp is high priority. pop/smtp/imap default. Everything else low.

    My problem are my drops in qwanacks

    34000+ in 10 hours. Is this normal? can you help? I've searched the foruns and tryed several solutions.



  • With traffic shaping enable expect to see drops. Some traffic gets dropped for higher priority. Now if you are experiencing problems then it might be a different story.



  • No problems. Just concerned about the drops. Just wanted to know if that was important.



  • That's good. To put it best you will see some drops with traffic shaping, but a lot could be a problem.
    I was looking at http://forum.pfsense.org/index.php/topic,14485.0.html

    Make sure you set your up and download right.


Log in to reply