Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Athp driver

    Development
    8
    71
    11.3k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • kiokomanK
      kiokoman LAYER 8
      last edited by

      nonSense 12-RELEASE-p4 https://drive.google.com/drive/folders/1fM-Jlmf8BY21kIEGueSxFWmrISZqcDj3
      as before i had to add ALQ and increse #define FIRMWARE_MAX because i had "firmware table full!" followed by kernel panic

      ̿' ̿'\̵͇̿̿\з=(◕_◕)=ε/̵͇̿̿/'̿'̿ ̿
      Please do not use chat/PM to ask for help
      we must focus on silencing this @guest character. we must make up lies and alter the copyrights !
      Don't forget to Upvote with the 👍 button for any post you find to be helpful.

      1 Reply Last reply Reply Quote 0
      • stephenw10S
        stephenw10 Netgate Administrator
        last edited by

        Anything else changed in there? Just updated?

        Not really sure what is required to put this into 802.11ac mode. It seems like that would ahve to be set via ifconfig and perhaps that part is missing at this point...

        Steve

        1 Reply Last reply Reply Quote 0
        • kiokomanK
          kiokoman LAYER 8
          last edited by kiokoman

          i just recopiled the pfsense kernel because there was an update on the kernel but nothing to do with wifi in general

          idk where that part is missing on the ath10k driver or kernel

          [2.5.0-DEVELOPMENT][root@pfSense.localdomain]/root: ifconfig athp0_wlan0 mode 11g
[2.5.0-DEVELOPMENT][root@pfSense.localdomain]/root: ifconfig athp0_wlan0 mode 11a
[2.5.0-DEVELOPMENT][root@pfSense.localdomain]/root: ifconfig athp0_wlan0 mode 11b
[2.5.0-DEVELOPMENT][root@pfSense.localdomain]/root: ifconfig athp0_wlan0 mode 11g
[2.5.0-DEVELOPMENT][root@pfSense.localdomain]/root: ifconfig athp0_wlan0 mode 11na
[2.5.0-DEVELOPMENT][root@pfSense.localdomain]/root: ifconfig athp0_wlan0 mode 11ac
ifconfig: SIOCSIFMEDIA (media): Invalid argument

          sadly, for sure nothing will come out of it in the next few days

          ̿' ̿'\̵͇̿̿\з=(◕_◕)=ε/̵͇̿̿/'̿'̿ ̿
          Please do not use chat/PM to ask for help
          we must focus on silencing this @guest character. we must make up lies and alter the copyrights !
          Don't forget to Upvote with the 👍 button for any post you find to be helpful.

          1 Reply Last reply Reply Quote 0
          • kiokomanK
            kiokoman LAYER 8
            last edited by

            https://redmine.pfsense.org/issues/9538

            "ALQ added to all pfSense kernels"

            good news, at least we don't need to recompile nonSense kernel anymore, we just need the modules

            ̿' ̿'\̵͇̿̿\з=(◕_◕)=ε/̵͇̿̿/'̿'̿ ̿
            Please do not use chat/PM to ask for help
            we must focus on silencing this @guest character. we must make up lies and alter the copyrights !
            Don't forget to Upvote with the 👍 button for any post you find to be helpful.

            1 Reply Last reply Reply Quote 0
            • stephenw10S
              stephenw10 Netgate Administrator
              last edited by

              Yup, there was some other stuff being added, seemed like a good time. Just using the modules will be waaay easier.

              However I'm not sure the max firmware size increase has been included yet. That has potential to affect far more things so it was being investigated last I heard.

              Steve

              1 Reply Last reply Reply Quote 0
              • stephenw10S
                stephenw10 Netgate Administrator
                last edited by

                @kiokoman said in Athp driver:

                FIRMWARE_MAX

                What value did you end up using for that? Is it possible to allow the firmware to be loaded there by not loading other unused firmwares perhaps?

                Steve

                1 Reply Last reply Reply Quote 0
                • kiokomanK
                  kiokoman LAYER 8
                  last edited by

                  yes, i understand that, but i have 2 atheros mini pci express card, 1 for 2.4Ghz that use ath9k that work without problem and one QCA988X for the 5Ghz.
                  i set FIRMWARE_MAX to 100 but i put a random value, default was 50 if I remember correctly.

                  ̿' ̿'\̵͇̿̿\з=(◕_◕)=ε/̵͇̿̿/'̿'̿ ̿
                  Please do not use chat/PM to ask for help
                  we must focus on silencing this @guest character. we must make up lies and alter the copyrights !
                  Don't forget to Upvote with the 👍 button for any post you find to be helpful.

                  1 Reply Last reply Reply Quote 0
                  • stephenw10S
                    stephenw10 Netgate Administrator
                    last edited by

                    Yes I have two cards in there also. 😉

                    But it would be a useful test. I was referring to some of the other stuff like the Broadcom and Chelsio firmwares. I've never tried to check what is loaded there by default though. More research needed!

                    Steve

                    1 Reply Last reply Reply Quote 0
                    • kiokomanK
                      kiokoman LAYER 8
                      last edited by kiokoman

                      i am now on official kernel, after the introduction of ALQ, and that problem did not come out again/i don't need to modify firmware_max anymore.
                      also i changed my 4 lan network card from realtek to intel i350-t4. i had too many trouble from realtek.
                      so now i don't need to load if_re.ko anymore, maybe that helped.

                      ̿' ̿'\̵͇̿̿\з=(◕_◕)=ε/̵͇̿̿/'̿'̿ ̿
                      Please do not use chat/PM to ask for help
                      we must focus on silencing this @guest character. we must make up lies and alter the copyrights !
                      Don't forget to Upvote with the 👍 button for any post you find to be helpful.

                      1 Reply Last reply Reply Quote 0
                      • kiokomanK
                        kiokoman LAYER 8
                        last edited by

                        @stephenw10 i'm trying to understand why the athp0 is not recognized as a wireless interface in the gui,
                        i track down the problem to this file: /usr/local/www/interfaces_assign.php at line 209 where it say

                        if (preg_match($g['wireless_regex'], $_POST['if_add'])) {
			$config['interfaces'][$newifname]['wireless'] = array();
			interface_sync_wireless_clones($config['interfaces'][$newifname], false);
		}

                        it should save the interface inside a 'wireless' array but it doesn't do it, it save it inside a "enable" array

                        i put a print_r($config); inside the php

                        [opt5] => Array ( [descr] => WIFI5G [if] => athp0_wlan0 [enable] => [spoofmac] => [ipaddr] => ....
                        vs
                        [opt3] => Array ( [descr] => WIFI [if] => ath0_wlan0 [wireless] => Array ( [mode] => hostap [standard] =>....

                        from what i understand, the 'wireless' tag is readed when you go to configure the interface
                        i'm too tired now to go on, i will check further tomorrow, if you have any idea let me know

                        ̿' ̿'\̵͇̿̿\з=(◕_◕)=ε/̵͇̿̿/'̿'̿ ̿
                        Please do not use chat/PM to ask for help
                        we must focus on silencing this @guest character. we must make up lies and alter the copyrights !
                        Don't forget to Upvote with the 👍 button for any post you find to be helpful.

                        1 Reply Last reply Reply Quote 0
                        • stephenw10S
                          stephenw10 Netgate Administrator
                          last edited by

                          Yeah I'll have to re-check tomorrow too. I'm pretty sure I found that previously though.... 🤔

                          Steve

                          1 Reply Last reply Reply Quote 0
                          • kiokomanK
                            kiokoman LAYER 8
                            last edited by kiokoman

                            found something new inside interfaces_assign.php

                            if (preg_match($g['wireless_regex'] =>

                            /^(ath|bwi|bwn|ipw|iwi|iwm|iwn|malo|mwl|ral|rsu|rum|run|uath|upgt|ural|urtw|urtwn|wi|wpi|wtap|zyd)[0-9]
                            athp does not match preg_match, now i need to find out where this is defined ...

                            found it
                            /etc/inc/globals.inc
                            need to add athp

                            "wireless_regex" => "/^(ath|bwi|bwn|ipw|iwi|iwm|iwn|malo|mwl|ral|rsu|rum|run|uath|upgt|ural|urtw|urtwn|wi|wpi|wtap|zyd|athp)[0-9]+/",

                            after adding it, you need to delete and re-add the interface

                            ̿' ̿'\̵͇̿̿\з=(◕_◕)=ε/̵͇̿̿/'̿'̿ ̿
                            Please do not use chat/PM to ask for help
                            we must focus on silencing this @guest character. we must make up lies and alter the copyrights !
                            Don't forget to Upvote with the 👍 button for any post you find to be helpful.

                            1 Reply Last reply Reply Quote 1
                            • stephenw10S
                              stephenw10 Netgate Administrator
                              last edited by

                              Aha, that was it, nice!

                              1 Reply Last reply Reply Quote 0
                              • stephenw10S
                                stephenw10 Netgate Administrator
                                last edited by

                                Hmm, I kinda lost track of where we are with this.

                                I have two ath10k NICs in my test box and they load up OK across 2.5 updates. I have some kernel modules in there but they are waaay old at this point. The only line required, seemingly, is if_athp_load="yes" in loader.conf(.local). It seems to pull in the required firmware modules without explicitly loading them:

                                [2.5.0-DEVELOPMENT][root@apu.stevew.lan]/root: kldstat
Id Refs Address                Size Name
 1   22 0xffffffff80200000  3123108 kernel
 2    1 0xffffffff83324000    d42f8 if_athp.ko
 3    1 0xffffffff83621000      a45 athp_QCA988X_hw2.0_board.bin.ko
 4    1 0xffffffff83622000    3cb9f athp_QCA988X_hw2.0_firmware-5.bin.ko
 5    1 0xffffffff8365f000      fe0 cpuctl.ko
 6    1 0xffffffff83660000     2678 intpm.ko
 7    1 0xffffffff83663000      b10 smbus.ko
 8    1 0xffffffff83664000     3110 cryptodev.ko

                                [2.5.0-DEVELOPMENT][root@apu.stevew.lan]/root: sysctl net.wlan.devices
net.wlan.devices: athp1 athp0

                                I don't see any sort of driver version listed in a sysctl.

                                I do see it trying and failing to load this:

                                athp0: ath10k_fetch_fw_file: firmware_get: athp_cal-pci-athp0.bin
athp_cal-pci-athp0.bin: could not load firmware image, error 2

                                Steve

                                1 Reply Last reply Reply Quote 0
                                • kiokomanK
                                  kiokoman LAYER 8
                                  last edited by kiokoman

                                  hi steve,
                                  athp_cal-pci-athp0.bin
                                  this is a firmware for calibration, not used/needed by us. I found it month ago and searched on google for what it was.

                                  the only file we need to load are the one already present in your kldstat

                                  the only thing that if_athp.ko do is to load the correct firmware for the card, in your case
                                  athp_QCA988X_hw2.0_board.bin.ko and athp_QCA988X_hw2.0_firmware-5.bin.ko

                                  also i found that if you remove *firmware-5.bin.ko then firmware-4.bin.ko will be loaded.
                                  if you remove *5.bin.ko and 4.bin.ko then *3.bin.ko will be loaded and so on

                                  i found somewhere a discussion talking about the difference of this firmware but the only thing that i rember now is that firmware-2 should be idea for AP mode. i tried all of them and saw no difference

                                  ̿' ̿'\̵͇̿̿\з=(◕_◕)=ε/̵͇̿̿/'̿'̿ ̿
                                  Please do not use chat/PM to ask for help
                                  we must focus on silencing this @guest character. we must make up lies and alter the copyrights !
                                  Don't forget to Upvote with the 👍 button for any post you find to be helpful.

                                  1 Reply Last reply Reply Quote 0
                                  • stephenw10S
                                    stephenw10 Netgate Administrator
                                    last edited by stephenw10

                                    Ah, interesting. Looks like the modules I have are dated May 14th, they must still be those you compiled.

                                    I'll try to update.

                                    Steve

                                    1 Reply Last reply Reply Quote 0
                                    • kiokomanK
                                      kiokoman LAYER 8
                                      last edited by kiokoman

                                      there is nothing new from Geramy or Adrian, the last commit is 7 feb
                                      but here is the new firmware i found
                                      10.2.4.70.70.zip
                                      from kvalo/ath10k-firmware

                                      content of athp_QCA988X_hw2.0_firmware-5.bin.ko

                                      ^?ELF^B^A^A 
......
^@QCA-ATH10K^@w^@^@^@^@^L^@^@^@10.2.4.70.70^A^@^@^@^D^@
......

                                      ̿' ̿'\̵͇̿̿\з=(◕_◕)=ε/̵͇̿̿/'̿'̿ ̿
                                      Please do not use chat/PM to ask for help
                                      we must focus on silencing this @guest character. we must make up lies and alter the copyrights !
                                      Don't forget to Upvote with the 👍 button for any post you find to be helpful.

                                      1 Reply Last reply Reply Quote 0
                                      • stephenw10S
                                        stephenw10 Netgate Administrator
                                        last edited by

                                        Seems good:

                                        athp1: qca988x hw2.0 (0x4100016c, 0x043202ff) fw 10.2.4.70.70 api 5 htt-ver 2.1 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1 features no-p2p,bit10

                                        Be nice if there was some change log. 2.5 years between those versions from what I can see.

                                        Steve

                                        1 Reply Last reply Reply Quote 0
                                        • kiokomanK
                                          kiokoman LAYER 8
                                          last edited by

                                          nope, sorry can't find any changelog anywhere

                                          ̿' ̿'\̵͇̿̿\з=(◕_◕)=ε/̵͇̿̿/'̿'̿ ̿
                                          Please do not use chat/PM to ask for help
                                          we must focus on silencing this @guest character. we must make up lies and alter the copyrights !
                                          Don't forget to Upvote with the 👍 button for any post you find to be helpful.

                                          1 Reply Last reply Reply Quote 0
                                          • stephenw10S
                                            stephenw10 Netgate Administrator
                                            last edited by

                                            Yeah I couldn't see anything either. Seems to be working OK though so no significant regression, at least not yet!

                                            Still seeing values in scans that cannot be correct in terms of channel or even the reported MAC. Some random data in there.

                                            Can't wait to try media VHT mode 11ac mediaopt hostap. Just need some way to actually apply it I guess. Fun!

                                            Steve

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post