Thermals Sensores not working in 2.4.4-p3
-
In System > Advanced > Misselanious
But in Dashboard it stays "Updating.."
I changed an saved again many times, but doesn´t work. -
It's possible your chip isn't supported, thus it has no values to return.
Do you see anything in
sysctl -a | grep temperature
? Anything in the main system log fromamdtemp
? -
@jimp said in Thermals Sensores not working in 2.4.4-p3:
sysctl -a | grep temperature
I see nothing from sysctl -a | grep temperature
Anything in the main system log from amdtemp?
Nothing -
check if the module is loaded
kldload amdtemp
-
If it is loaded then your specific sensor chip is not supported by the module.
-
@kiokoman said in Thermals Sensores not working in 2.4.4-p3:
check if the module is loaded
Where can I check it?
-
Run
kldstat
-
execute
kldstat
if you don't see amdtemp.ko in the list
execute
kldload amdtempif it's already there than "your specific sensor chip is not supported by the module."
-
@kiokoman said in Thermals Sensores not working in 2.4.4-p3:
kldstat
I am afraid that "your specific sensor chip is not supported by the module." :)
-
If it matters that much you could try a 2.5 snapshot. That has a number of 17h related additions over 2.4.4.
Steve
-
@stephenw10 Thank you for the answer. Actually it doesn´t matter enough to assume the risk. I will wait for a new stable release.
-
Version 2.4.5