Upgrade Pfsense system 23 july For Multi WAN + MULTI LAN (Open vpn, Wireless)
-
I use RC2
1.2.3-RC2
built on Wed Jun 24 00:36:43 EDT 2009It runs on a soekriss 5501, but after a couple of days it stalls, no traffic is coming through any more.
I can still ping the box but it hangs.
only a power cycle gets it going again.It is my main router so i can not investigate the state and need to reboot as quickly as possible.
Is has 3 interfaces enabled.
vr0 LAN
vr1 WAN pptp
vr2 DMZFurther more nothing special.
No traffic shaping load balance or other stuff.I use revert back to 1.2 now to make sure i get no calls in the evening about a dead router.
No complains, just an observation!
regards,
Johan -
I have several multi wan router, which I apply on some SOHO multiclient. I always update the pfsense 1.2.3. RC2 latest updater, ( http://snapshots.pfsense.org/FreeBSD_RELENG_7_2/pfSense_RELENG_1_2/updates/ ). In fact I have never experienced problems with the router, all interface with the normal running. The only true version of the updater prior to the current still found the log loadbalance (as in the sticky ( http://forum.pfsense.org/index.php/topic, 16671.0.html ) and I really understand it, because it does not disrupt the performance of the router in general. And up to now all of my router is running normally, without any obstacles that means.
Not trying to defend. :)
just the story of the fact that I experienced. ;DTHKS
-
i think i have been bitten by the following:
http://cvstrac.pfsense.com/tktview?tn=1935
regards,
Johan -
It seems PFsense, near the start …. stable release .... :D
changes from 16juni?
which version is the latest working? (the latest gives me a huge problem,can't do anything anymore)
-
One Pfsense used for the Multi-WAN, Multi-LAN (wireless, openvpn) can run Load Balance with Normal. Just log on the load balance constraints are still there ….. :)