Bypass At&t fiber BGW210-700

Phantom_Stage

installed pkg shellcmd

<earlyshellcmd>/root/bin/pfatt.sh</earlyshellcmd> earlyshellcmd ATT bridge

getting an error stating sh: syntax error: end of file unexpected (expecting word)
directly after loading configuration completes.

stephenw10

Do you get that same error if you just run the script at the command line?

It seems like the script may not be complete if it's showing that error. How did you copy it onto your firewall?

Steve

sherpagoodness

this is how your file should be - just replace with your modems mac address

#!/bin/sh
set -e

ONT_IF='igb0'
RG_IF='igb1'
RG_ETHER_ADDR='********LEAVE Apostrophes****************'
OPNSENSE='no'
LOG=/var/log/pfatt.log

getTimestamp(){
    echo `date "+%Y-%m-%d %H:%M:%S :: [pfatt.sh] ::"`
}

{
    echo "$(getTimestamp) pfSense + AT&T U-verse Residential Gateway for true bridge mode"
    echo "$(getTimestamp) Configuration: "
    echo "$(getTimestamp)        ONT_IF: $ONT_IF"
    echo "$(getTimestamp)         RG_IF: $RG_IF"
    echo "$(getTimestamp) RG_ETHER_ADDR: $RG_ETHER_ADDR"
    echo "$(getTimestamp)      OPNSENSE: $OPNSENSE"

    echo -n "$(getTimestamp) loading netgraph kernel modules... "
    /sbin/kldload -nq ng_etf
    echo "OK!"

    if [ ${OPNSENSE} != 'yes' ]; then
        echo -n "$(getTimestamp) attaching interfaces to ng_ether... "
        /usr/local/bin/php -r "pfSense_ngctl_attach('.', '$ONT_IF');" 
        /usr/local/bin/php -r "pfSense_ngctl_attach('.', '$RG_IF');"
        echo "OK!"
    fi 

    echo "$(getTimestamp) building netgraph nodes..."

    echo -n "$(getTimestamp)   creating ng_one2many... "
    /usr/sbin/ngctl mkpeer $ONT_IF: one2many lower one
    /usr/sbin/ngctl name $ONT_IF:lower o2m
    echo "OK!"

    echo -n "$(getTimestamp)   creating vlan node and interface... "
    /usr/sbin/ngctl mkpeer o2m: vlan many0 downstream
    /usr/sbin/ngctl name o2m:many0 vlan0
    /usr/sbin/ngctl mkpeer vlan0: eiface vlan0 ether

    /usr/sbin/ngctl msg vlan0: 'addfilter { vlan=0 hook="vlan0" }'
    /usr/sbin/ngctl msg ngeth0: set $RG_ETHER_ADDR
    echo "OK!"

    echo -n "$(getTimestamp)   defining etf for $ONT_IF (ONT)... "
    /usr/sbin/ngctl mkpeer o2m: etf many1 downstream
    /usr/sbin/ngctl name o2m:many1 waneapfilter
    /usr/sbin/ngctl connect waneapfilter: $ONT_IF: nomatch upper
    echo "OK!"

    echo -n "$(getTimestamp)   defining etf for $RG_IF (RG)... "
    /usr/sbin/ngctl mkpeer $RG_IF: etf lower downstream
    /usr/sbin/ngctl name $RG_IF:lower laneapfilter
    /usr/sbin/ngctl connect laneapfilter: $RG_IF: nomatch upper
    echo "OK!"

    echo -n "$(getTimestamp)   bridging etf for $ONT_IF <-> $RG_IF... "
    /usr/sbin/ngctl connect waneapfilter: laneapfilter: eapout eapout
    echo "OK!"

    echo -n "$(getTimestamp)   defining filters for EAP traffic... "
    /usr/sbin/ngctl msg waneapfilter: 'setfilter { matchhook="eapout" ethertype=0x888e }'
    /usr/sbin/ngctl msg laneapfilter: 'setfilter { matchhook="eapout" ethertype=0x888e }'
    echo "OK!"

    echo -n "$(getTimestamp)   enabling one2many links... "
    /usr/sbin/ngctl msg o2m: setconfig "{ xmitAlg=2 failAlg=1 enabledLinks=[ 1 1 ] }"
    echo "OK!"

    echo -n "$(getTimestamp)   removing waneapfilter:nomatch hook... "
    /usr/sbin/ngctl rmhook waneapfilter: nomatch
    echo "OK!"

    echo -n "$(getTimestamp) enabling $RG_IF interface... "
    /sbin/ifconfig $RG_IF up
    echo "OK!"

    echo -n "$(getTimestamp) enabling $ONT_IF interface... "
    /sbin/ifconfig $ONT_IF up
    echo "OK!"

    echo -n "$(getTimestamp) enabling promiscuous mode on $RG_IF... "
    /sbin/ifconfig $RG_IF promisc
    echo "OK!"

    echo -n "$(getTimestamp) enabling promiscuous mode on $ONT_IF... "
    /sbin/ifconfig $ONT_IF promisc
    echo "OK!"

    echo "$(getTimestamp) ngeth0 should now be available to configure as your pfSense WAN"
    echo "$(getTimestamp) done!"
} >> $LOG

Phantom_Stage

(1) I copied PFatt.sh as raw file to notepad.
(2) Made the changes as noted saving changes using semi colon " at beginning and at end of name to ensure it save as correct file type .sh
(3) used command prompt in pfsense webgui to upload to tmp directory.
(4) SSH into pfsense using putty to create directory root/bin.
(5) used file editor in pfsense to copy file to root/bin.

stephenw10

Notepad can break stuff completely. I recommend Notepad++ in Windows, though it's been a few years since I last used it.

If you open the file in Diag > Edit file does it looks correct?

Steve

Phantom_Stage

It looks correct from what I can tell...what if I copied it directly to the pfsense file edit made the changes there then save it as file type .sh? Does that eliminate the possibility of coruption?

stephenw10

Yes. Or just pull it directly into pfSense and then edit it in the webgui:

Steve

Phantom_Stage

@stephenw10 said in Bypass At&t fiber BGW210-700:

/root/bin/pfatt.sh

Did it got the same syntax error.

stephenw10

Sorry wrong file path there. Try this:

[2.5.0-DEVELOPMENT][admin@fw321.stevew.lan]/root: fetch -o /root/bin https://raw.githubusercontent.com/aus/pfatt/master/bin/pfatt.sh
/root/bin/pfatt.sh                                    3309  B   11 MBps    00s

Phantom_Stage

now I am getting the following error...kldload: an error occurred while loading the module. Please check dmesg(8) for more details. It appears I might be out of luck.

stephenw10

Can you load the module manually?:

kldload ng_etf.ko

Phantom_Stage

nope same error...can I download ng_etf.ko to /boot/kernel directly.

stephenw10

Hmm, and you got that module from the repo using pkg install?

Phantom_Stage

@stephenw10 it says the pkg is installed gonna delete it and reinstall now.

stephenw10

That sort of error can often be because the module is wrong, from the wrong FreeBSD version or wrong architecture, but that cannot be the case if you installed it from the repo.

Phantom_Stage

ok ran the pkg installer again it says installed but when I look in /boot/kernel I don't see the ng_etf-kmod file.
the original file was from https://github.com/aus/pfatt/blob/master/bin/ng_etf.ko

stephenw10

It installs it to /boot/modules. It installs and load fine or me here.

What hardware are you running this on?

Phantom_Stage

It's a Qotom I5 mini pc...gonna try my original pfsense computer build now just copied over the current xml config.

stephenw10

Can you show the exact command you're using and the error you're seeing?

Phantom_Stage

pkg install ng_etf-kmod-0.1 I don't get an error on the install it says it completed...maybe my expectation is wrong. I am assuming (which I know I should not) that the pkg installs all the variables and I simply have to connect the att gateway to the wan port on the pfsense box and the att ont to the lan side of the pfsense box and reboot.