Web GUI

Ilya.V

you know I wouldn't use such an ISP
I would also change the provider, but we have no analogues)

you still haven't written down your hardwares types and connections methods
From all providers settings come via DHCP.

Gertjan

@DaddyGo said in Web GUI:

you know I wouldn't use such an ISP
I would also change the provider, but we have no analogues)

@DaddyGo said in Web GUI:

you still haven't written down your hardwares types and connections methods
From all providers settings come via DHCP.

And the answer was ?

Ilya.V

I would also change the provider, but we have no analogues)
From all providers settings come via DHCP.

DaddyGo

if there is no port filtering..... - , you say that 1:1, then something is still missing (NAT-NAT-NAT)

we would expect a drawing from you about the system (in any form, even by hand)
and raise the GUI port to a higher range

I would still pull out the WAN1 cable (if it is possible of course) and see what happens then
-I think you will be surprised what is not working in addition to the GUI yet

the load balancer can hide a lot of things in front of your eyes, if you don't pay attention and you think everything works great on both WANs (Round-robin)

Ilya.V

@DaddyGo said in Web GUI:

if there is no port filtering..... - , you say that 1:1, then something is still missing (NAT-NAT-NAT)
we would expect a drawing from you about the system (in any form, even by hand)
and raise the GUI port to a higher range

I would still pull out the WAN1 cable (if it is possible of course) and see what happens then
-I think you will be surprised what is not working in addition to the GUI yet

the load balancer can hide a lot of things in front of your eyes, if you don't pay attention and you think everything works great on both WANs (Round-robin)

DaddyGo

THX:

-I wonder what tool / device (CPE) produces this?
-do you have access to this tool / device?
-can you change the GUI port?
-what about WAN1 test, can be disconnected and tested

Ilya.V

@DaddyGo said in Web GUI:

-I wonder what tool / device (CPE) produces this?
-do you have access to this tool / device?
-can you change the GUI port?
-what about WAN1 test, can be disconnected and tested

device type unknown
no access to it
I will change the port for verification and write the result
WAN1 will not work in the near future

valentinius

сменить провайдера и мне не помешало бы, но, увы, нет идентичного,

DaddyGo

@valentinius thanks for your comment, but we are beyond that

valentinius

@DaddyGo Yesh, you are right and i am really glad that you have supported me! Wish we were in front of that(