Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    pfSense on Watchguard M270

    Hardware
    17
    130
    23.8k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • S
      shaker
      last edited by

      Yes I will do. I made some notes to not forget.

      Actually the ethernetswitch is configured to use 1 WAN and 7 LAN interfaces, working in switch mode.
      Is it possible to configure it to have 7 independent LAN ports, where to activate VLANs on each?

      1 Reply Last reply Reply Quote 0
      • stephenw10S
        stephenw10 Netgate Administrator
        last edited by

        Yes, you just to set them up as that in the switch configure script using etherswitchcfg.

        1 Reply Last reply Reply Quote 0
        • S
          shaker
          last edited by shaker

          Is this the right config to have all ports individual?

          #!/bin/sh
#

echo "Configuring switch..."
logger Configuring switch...

etherswitchcfg vlangroup1 vlan 1 members 9
etherswitchcfg vlangroup2 vlan 2 members 10
etherswitchcfg vlangroup3 vlan 3 members 10
etherswitchcfg vlangroup4 vlan 4 members 10
etherswitchcfg vlangroup5 vlan 5 members 10
etherswitchcfg vlangroup6 vlan 6 members 10
etherswitchcfg vlangroup7 vlan 7 members 10
etherswitchcfg vlangroup8 vlan 8 members 10
etherswitchcfg vlangroup9 vlan 9 members 1
etherswitchcfg vlangroup10 vlan 10 members 2,3,4,5,6,7,8

etherswitchcfg port1 forwarding
etherswitchcfg port2 forwarding
etherswitchcfg port3 forwarding
etherswitchcfg port4 forwarding
etherswitchcfg port5 forwarding
etherswitchcfg port6 forwarding
etherswitchcfg port7 forwarding
etherswitchcfg port8 forwarding
etherswitchcfg port9 forwarding
etherswitchcfg port10 forwarding

echo "done"
logger done

          I am not really sure how I need to configure it.

          1 Reply Last reply Reply Quote 0
          • stephenw10S
            stephenw10 Netgate Administrator
            last edited by

            You need to set the switch in 802.1Q mode, it's in port vlan mode by default:

            etherswitchcfg config vlan_mode DOT1Q

            Then add the internal ports as tagged members to each group so you can address them as VLANs in pfSense. Also never use VLAN 1 (or 0) directly unless there no other way so:

            etherswitchcfg vlangroup1 vlan 101 members 1,9t
etherswitchcfg vlangroup2 vlan 102 members 2,10t
etherswitchcfg vlangroup3 vlan 103 members 3,10t
etherswitchcfg vlangroup4 vlan 104 members 4,10t
etherswitchcfg vlangroup5 vlan 105 members 5,10t
etherswitchcfg vlangroup6 vlan 106 members 6,10t
etherswitchcfg vlangroup7 vlan 107 members 7,10t
etherswitchcfg vlangroup8 vlan 108 members 8,10t

            Then you need to set the PVID for each port so untagged traffic arriving is placed in the correct vlan:

            etherswitchcfg port1 pvid 101
etherswitchcfg port2 pvid 102
etherswitchcfg port3 pvid 103
etherswitchcfg port4 pvid 104
etherswitchcfg port5 pvid 105
etherswitchcfg port6 pvid 106
etherswitchcfg port7 pvid 107
etherswitchcfg port8 pvid 108

            Because you only have one VLAN on port 9 you could also just use that untagged internally but if you ever want to move the VLANs around or add more on port 9 it's easier to set it up tagged now.
            You can also do other things like setup the two internal ports as a lagg to the switch and put all the VLANs on that. We do that in the 7100 because in some situations it can provide more bandwidth. But you really have to try hard to pass more than 2.5Gbps total and it adds more complexity.

            Steve

            I 1 Reply Last reply Reply Quote 0
            • I
              ivanbarr @stephenw10
              last edited by

              @stephenw10 Is it possible to get the switch to appear in the Web UI on the M270? I think the UI code makes a call to some function like platform_has_switch() to determine whether to show the switch items under the interfaces menu. How does pfsense come to know if a device has a switch or not?

              1 Reply Last reply Reply Quote 0
              • stephenw10S
                stephenw10 Netgate Administrator
                last edited by

                There's no easy setting for that. You'd have to patch the code. Probably in a few places. The defaults would need to be set differently to the 7100.

                1 Reply Last reply Reply Quote 0
                • S
                  shaker
                  last edited by

                  Hi stephenw10,

                  I configured the M270 like you described above.
                  Activate 802.1Q mode, and configured the etherswitchcfg all tagged.

                  Then I opened console and add a vlan 120, activate the IP on LAN, stuff like that.
                  Play a bit around.
                  This is how it looks like:

                   WAN (wan)       -> ix0        ->
 LAN (lan)       -> ix1        -> v4: 192.168.10.1/24
 OPT1 (opt1)     -> ix1.120    -> v4: 192.168.120.1/24

 0) Logout (SSH only)                  9) pfTop
 1) Assign Interfaces                 10) Filter Logs
 2) Set interface(s) IP address       11) Restart webConfigurator
 3) Reset webConfigurator password    12) PHP shell + Netgate pfSense Plus tools
 4) Reset to factory defaults         13) Update from console
 5) Reboot system                     14) Enable Secure Shell (sshd)
 6) Halt system                       15) Restore recent configuration
 7) Ping host                         16) Restart PHP-FPM
 8) Shell

                  I tried to connect directly on port 1-7 and also with a switch, Tagged the port vom M270 on VLAN120 and untagged the port from my pc, but I can't reach the web from pfsense.

                  Do you know what I am doing wrong?

                  1 Reply Last reply Reply Quote 0
                  • stephenw10S
                    stephenw10 Netgate Administrator
                    last edited by

                    What does etherswitchcfg show?

                    1 Reply Last reply Reply Quote 0
                    • Z
                      zhellalex
                      last edited by stephenw10

                      Hello!
                      Can't run pfsense plus on firebox m270, network interfaces don't work.
                      I first installed pfSense-CE-memstick-serial-2.6.0-RELEASE-amd64 on the laptop. Activated and updated to pfSense Plus 23.01-RELEASE (amd64).
                      Installed msata in firebox m270.
                      When booting, pfsense plus the following:
                      WAN interface as ix0, and LAN interface as ix1
                      Added the following content to the /boot/device.hints file:

                      hint.mdio.0.at="ix1"
hint.e6000sw.0.addr=0
hint.e6000sw.0.is6190=1
hint.e6000sw.0.port0disabled=1
hint.e6000sw.0.port9cpu=1
hint.e6000sw.0.port10cpu=1
hint.e6000sw.0.port9speed=2500
hint.e6000sw.0.port10speed=2500

                      reboot firebox m270
                      in the directory /usr/local/etc/rc.d/ created the file fbm270.sh and inserted the following into it:

                      #!/bin/sh
#
# Script to setup the switch in the M270
#
# SteveW 5/6/2020
#

echo "Configuring switch..."
logger Configuring switch...

etherswitchcfg vlangroup1 vlan 1 members 9
etherswitchcfg vlangroup2 vlan 2 members 3,4,5,6,7,8,10
etherswitchcfg vlangroup3 vlan 3 members 2,4,5,6,7,8,10
etherswitchcfg vlangroup4 vlan 4 members 2,3,5,6,7,8,10
etherswitchcfg vlangroup5 vlan 5 members 2,3,4,6,7,8,10
etherswitchcfg vlangroup6 vlan 6 members 2,3,4,5,7,8,10
etherswitchcfg vlangroup7 vlan 7 members 2,3,4,5,6,8,10
etherswitchcfg vlangroup8 vlan 8 members 2,3,4,5,6,7,10
etherswitchcfg vlangroup9 vlan 9 members 1
etherswitchcfg vlangroup10 vlan 10 members 2,3,4,5,6,7,8
etherswitchcfg port1 forwarding
etherswitchcfg port2 forwarding
etherswitchcfg port3 forwarding
etherswitchcfg port4 forwarding
etherswitchcfg port5 forwarding
etherswitchcfg port6 forwarding
etherswitchcfg port7 forwarding
etherswitchcfg port8 forwarding

echo "done"
logger done

                      run it chmod +x fbm270.sh
                      run it ./fbm270.sh
                      reboot firebox m270
                      after loading pfsence
                      boot.png
                      firebox m270 ports 0-7 light up when a patch cord is connected. But the device itself is not available via IP 192.168.1.1 on ports 1-7. In the settings, wan chose to connect via dhcp, but with firebox m270 gigabit Ethernet 0 there are no requests to get an ip address via dhcp.
                      Switch Configuration:

                      etherswitch0: VLAN mode: PORT
port1:
        state=8<FORWARDING>
        flags=0<>
        media: Ethernet autoselect (1000baseT <full-duplex>)
        status: active
port2:
        state=8<FORWARDING>
        flags=0<>
        media: Ethernet autoselect (1000baseT <full-duplex,master>)
        status: active
port3:
        state=8<FORWARDING>
        flags=0<>
        media: Ethernet autoselect (none)
        status: no carrier
port4:
        state=8<FORWARDING>
        flags=0<>
        media: Ethernet autoselect (none)
        status: no carrier
port5:
        state=8<FORWARDING>
        flags=0<>
        media: Ethernet autoselect (none)
        status: no carrier
port6:
        state=8<FORWARDING>
        flags=0<>
        media: Ethernet autoselect (none)
        status: no carrier
port7:
        state=8<FORWARDING>
        flags=0<>
        media: Ethernet autoselect (none)
        status: no carrier
port8:
        state=8<FORWARDING>
        flags=0<>
        media: Ethernet autoselect (none)
        status: no carrier
port9:
        state=1<DISABLED>
        flags=1<CPUPORT>
        media: Ethernet 2500Base-KX <full-duplex>
        status: active
port10:
        state=1<DISABLED>
        flags=1<CPUPORT>
        media: Ethernet 2500Base-KX <full-duplex>
        status: active
vlangroup1:
        port: 1
        members 9
vlangroup2:
        port: 2
        members 3,4,5,6,7,8,10
vlangroup3:
        port: 3
        members 2,4,5,6,7,8,10
vlangroup4:
        port: 4
        members 2,3,5,6,7,8,10
vlangroup5:
        port: 5
        members 2,3,4,6,7,8,10
vlangroup6:
        port: 6
        members 2,3,4,5,7,8,10
vlangroup7:
        port: 7
        members 2,3,4,5,6,8,10
vlangroup8:
        port: 8
        members 2,3,4,5,6,7,10
vlangroup9:
        port: 9
        members 1
vlangroup10:
        port: 10
        members 2,3,4,5,6,7,8

                      Do not tell me what I did wrong or what else needs to be done to make the firebox m270 work?
                      Thank you.

                      1 Reply Last reply Reply Quote 0
                      • stephenw10S
                        stephenw10 Netgate Administrator
                        last edited by

                        You can see the internal ports 9 and 10 are disabled. You need to add to the script:

                        etherswitchcfg port9 forwarding
etherswitchcfg port10 forwarding

                        That is a change in the default behaviour of the switch since I first looked at it.

                        Steve

                        Z 2 Replies Last reply Reply Quote 0
                        • Z
                          zhellalex @stephenw10
                          last edited by

                          @stephenw10

                          1 Reply Last reply Reply Quote 0
                          • stephenw10S
                            stephenw10 Netgate Administrator
                            last edited by

                            ??

                            1 Reply Last reply Reply Quote 0
                            • Z
                              zhellalex @stephenw10
                              last edited by

                              @stephenw10 Thank you.
                              Everything worked.

                              1 Reply Last reply Reply Quote 1
                              • S
                                shaker
                                last edited by

                                I stephenw10,

                                sorry for the late reply, I was on business.

                                My etherswitchcfg shows this:

                                [23.01-RELEASE][root@pfSense.home.arpa]/root: etherswitchcfg
etherswitch0: VLAN mode: DOT1Q
port1:
        pvid: 110
        state=1<DISABLED>
        flags=0<>
        media: Ethernet autoselect (none)
        status: no carrier
port2:
        pvid: 120
        state=1<DISABLED>
        flags=0<>
        media: Ethernet autoselect (1000baseT <full-duplex>)
        status: active
port3:
        pvid: 130
        state=1<DISABLED>
        flags=0<>
        media: Ethernet autoselect (none)
        status: no carrier
port4:
        pvid: 140
        state=1<DISABLED>
        flags=0<>
        media: Ethernet autoselect (none)
        status: no carrier
port5:
        pvid: 150
        state=1<DISABLED>
        flags=0<>
        media: Ethernet autoselect (none)
        status: no carrier
port6:
        pvid: 160
        state=1<DISABLED>
        flags=0<>
        media: Ethernet autoselect (none)
        status: no carrier
port7:
        pvid: 170
        state=1<DISABLED>
        flags=0<>
        media: Ethernet autoselect (none)
        status: no carrier
port8:
        pvid: 180
        state=1<DISABLED>
        flags=0<>
        media: Ethernet autoselect (none)
        status: no carrier
port9:
        pvid: 1
        state=1<DISABLED>
        flags=1<CPUPORT>
        media: Ethernet 2500Base-KX <full-duplex>
        status: active
port10:
        pvid: 1
        state=1<DISABLED>
        flags=1<CPUPORT>
        media: Ethernet 2500Base-KX <full-duplex>
        status: active
vlangroup0:
        vlan: 1
        members 1,2,3,4,5,6,7,8,9,10
vlangroup1:
        vlan: 110
        members 1,9t
vlangroup2:
        vlan: 120
        members 2,10t
vlangroup3:
        vlan: 130
        members 3,10t
vlangroup4:
        vlan: 140
        members 4,10t
vlangroup5:
        vlan: 150
        members 5,10t
vlangroup6:
        vlan: 160
        members 6,10t
vlangroup7:
        vlan: 170
        members 7,10t
vlangroup8:
        vlan: 180
        members 8,10t

                                What should I do next?

                                stephenw10S 1 Reply Last reply Reply Quote 0
                                • stephenw10S
                                  stephenw10 Netgate Administrator @shaker
                                  last edited by stephenw10

                                  All the ports are in state DISABLED so the script did not set them to FORWARDING correctly.

                                  Otherwise it looks good.

                                  1 Reply Last reply Reply Quote 0
                                  • S
                                    shaker
                                    last edited by

                                    This is the script:

                                    #!/bin/sh
#

echo "Configuring switch..."
logger Configuring switch...

etherswitchcfg config vlan_mode DOT1Q

etherswitchcfg vlangroup1 vlan 110 members 1,9t
etherswitchcfg vlangroup2 vlan 120 members 2,10t
etherswitchcfg vlangroup3 vlan 130 members 3,10t
etherswitchcfg vlangroup4 vlan 140 members 4,10t
etherswitchcfg vlangroup5 vlan 150 members 5,10t
etherswitchcfg vlangroup6 vlan 160 members 6,10t
etherswitchcfg vlangroup7 vlan 170 members 7,10t
etherswitchcfg vlangroup8 vlan 180 members 8,10t

etherswitchcfg port1 pvid 110
etherswitchcfg port2 pvid 120
etherswitchcfg port3 pvid 130
etherswitchcfg port4 pvid 140
etherswitchcfg port5 pvid 150
etherswitchcfg port6 pvid 160
etherswitchcfg port7 pvid 170
etherswitchcfg port8 pvid 180


echo "done"
logger done

                                    Do I need some forwardings too?

                                    R 1 Reply Last reply Reply Quote 0
                                    • stephenw10S
                                      stephenw10 Netgate Administrator
                                      last edited by

                                      Yes all the switch ports are disabled by default, you still need the section to set each port to forwarding. You might be able to combine that with the pvid. I've not tried that in one command.

                                      1 Reply Last reply Reply Quote 0
                                      • S
                                        shaker
                                        last edited by

                                        Ok, now it looks like this:

                                        etherswitch0: VLAN mode: DOT1Q
port1:
        pvid: 110
        state=8<FORWARDING>
        flags=0<>
        media: Ethernet autoselect (none)
        status: no carrier
port2:
        pvid: 120
        state=8<FORWARDING>
        flags=0<>
        media: Ethernet autoselect (1000baseT <full-duplex>)
        status: active
port3:
        pvid: 130
        state=8<FORWARDING>
        flags=0<>
        media: Ethernet autoselect (none)
        status: no carrier
port4:
        pvid: 140
        state=8<FORWARDING>
        flags=0<>
        media: Ethernet autoselect (none)
        status: no carrier
port5:
        pvid: 150
        state=8<FORWARDING>
        flags=0<>
        media: Ethernet autoselect (none)
        status: no carrier
port6:
        pvid: 160
        state=8<FORWARDING>
        flags=0<>
        media: Ethernet autoselect (none)
        status: no carrier
port7:
        pvid: 170
        state=8<FORWARDING>
        flags=0<>
        media: Ethernet autoselect (none)
        status: no carrier
port8:
        pvid: 180
        state=8<FORWARDING>
        flags=0<>
        media: Ethernet autoselect (none)
        status: no carrier
port9:
        pvid: 1
        state=8<FORWARDING>
        flags=1<CPUPORT>
        media: Ethernet 2500Base-KX <full-duplex>
        status: active
port10:
        pvid: 1
        state=8<FORWARDING>
        flags=1<CPUPORT>
        media: Ethernet 2500Base-KX <full-duplex>
        status: active
vlangroup0:
        vlan: 1
        members 1,2,3,4,5,6,7,8,9,10
vlangroup1:
        vlan: 110
        members 1,9t
vlangroup2:
        vlan: 120
        members 2,10t
vlangroup3:
        vlan: 130
        members 3,10t
vlangroup4:
        vlan: 140
        members 4,10t
vlangroup5:
        vlan: 150
        members 5,10t
vlangroup6:
        vlan: 160
        members 6,10t
vlangroup7:
        vlan: 170
        members 7,10t
vlangroup8:
        vlan: 180
        members 8,10t

                                        I am going ahead and give it a try!
                                        Thank you from here!

                                        1 Reply Last reply Reply Quote 0
                                        • stephenw10S
                                          stephenw10 Netgate Administrator
                                          last edited by

                                          Hmm, probably should remove VLAN1 from the switch. That's interesting, I guess that must be a default. You could probably just change the vlan groups you're defining to start at 0 so it gets replaced. However it won't affect anything since the PVID on the ports is set something other than 1.

                                          Steve

                                          1 Reply Last reply Reply Quote 0
                                          • S
                                            shaker
                                            last edited by

                                            It works fine for now. I didn't connect everything at the moment. But I am able to connect now, receiving IP and can organize the VLANs.
                                            As next I need to configure pfsense. Will take some time. thanks guys

                                            1 Reply Last reply Reply Quote 1
                                            • First post
                                              Last post