-
Ooo this is nice work.
Definitely some differences to the G400 command set then. Mostly the same though.
Steve
-
@Pepito-Payet said in Operate checkpoint 4800 LCD screen with pfSense (EZIO-G500):
perate the checkpoint 4800 screens on pfsen
Did you able to get VGA out to instal pfsense in checkpoint 4800
if you know how to connect the cable to VGA adapter let me know -
Hello,
I used a USB cable to turn it into a VGA cable to plug into VGA inside the checkpoint. But the console cable also works.
-
https://pinoutguide.com/Audio-Video-Hardware/checkpoint_utm-1_pinout.shtml
-
@Pepito-Payet
thank You i will check i need one more help. from below pic what is the correct port will be
))
-
-
This post is deleted! -
This post is deleted! -
you store or your images that you post? I can't seem to get them to post on the forum like you.
-
@saint-frater late to the party but hope I can help anyways. My g500 acts very strange. For instance the “move cursor to leftmost position” is 0x28, the “clear screen command” is 0x38 or the enter button returns a 0x75... odd
The setup I’m using is quite simple: the G500 is attached to a 5v power supply and to read/ write I’m using an arduino nano -
@spolverino long time I've played with that.
I'm quiet sure that the issue you face is due to the voltage of your arduino's serial Interface.
If I remember well, I've the same issues with my arduino, until I use a small USB Serial interface on my PC.
you may see it behind the breadboard, (the DB9 connector):
I think, on the Arduino, the serial interface is 3.3V max, and the G500 is running at 5V... when voltage is not correct, you get strange behavior from the G500, and you may get in trouble with your arduino...
Frater
-
@saint-frater checkpoint 4400 how to get the vga output. can you please share some information.
-
@sranasundaragmail-com Didn't try, since the G500 is only accepting serial input...
if you want to display VGA (on a 64x32pxl) you should write a driver that does this:
- capture current VGA display memory
- resize the windows 640x480 -> 64x32
- reduce color from 256 color -> 2
- serialize the buffer
- loop
it's a loot of effort for a very bad result...
it should be more efficient to write your own graphic drivers and "draw" on the miniscreen... but the pfsense should also be update to take advantage...
-
@saint-frater Thanks for the quick reply. Arduino has to be the problem here. Will try with a raspberry and if that doesn’t work I’ll have to a usb to serial device like the one you use.
An interesting thing I have noticed on the g500 is that it has a usb circuit left blank on the back. It might have been used in testing... -
@spolverino I've also started (but time was a constraint) some reverse engineering of the CP's LCD drivers, you'll find some information there:
https://git.nox-rhea.org/globals/reverse-engineering/ezio-g500
-
For what it's worth, I did some work based on the findings at
https://git.nox-rhea.org/globals/reverse-engineering/ezio-g500
and now have a somewhat working way to write text to the LCD + a way to parse mono BMPs into a format the LCD understands and displays.
C would probably be more suited to the task but I had no compiler handy.
I was also missing a way to set the serial parameters from inside the script, so make sure your ttyS1 is already set to 115200, 8N1, no flow-control.
lcd.zip -
Oh fun!
bmp have to be 128x64? -
@stephenw10 yes, it is not an actual BMP parser, I just used ImageMagick's (known) offset when creating a 1bit bitmap.
something likeconvert -pointsize 11 -size 128x64 -font "Arial" -background white -fill black label:"some text\nand some more text" -monochrome text.bmpand then
perl /path/to/bmp2lcd text.bmpshould work
edit: another thing I noticed: the LCD needs local modem control lines (I can't imagine why, since only three wires are connected to it), like so:
stty -F/dev/ttyS1 clocal speed 115200
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.