Is it possible my new SG3100 is bricked after 10 mins of use?

ecottd

I just unboxed my SG3100 and ran through the PFSense initial setup. It got as far as checking for updates and sat for a long time. I never got to hit the 'finish' button on the setup. I lost network contact with the SG3100 once it started to check for updates. Since that point I have connected to serial console and can't figure out what to do to get this thing back online.
What are my options for getting this thing back working?

Gertjan

@ecottd
The initial setup consisted of what ?

Your 3100 is connected to what type of upstream device ? A modem ? Another router ?
Can you show the console menu, like :

Passphrase for key "rsa-key-20150201":
pfSense - Netgate Device ID: b87955xxxxxx42af9fa0

*** Welcome to pfSense 2.4.5-RELEASE-p1 (amd64) on pfsense ***

 WAN (wan)       -> em0        -> v4/DHCP4: 192.168.10.3/24
 LAN (lan)       -> em1        -> v4: 192.168.1.1/24
                                  v6: 2001:470:1f13:5c0:2::1/64
 PORTAL (opt1)   -> em2        -> v4: 192.168.2.1/24
 HENETV6 (opt2)  -> gif0       -> v6: 2001:470:1f12:xxx::2/128
 OPT3 (opt3)     -> em3        ->
 OPT4 (opt4)     -> bge0       ->
 OPENVPN (opt5)  -> ovpns1     -> v4: 192.168.3.1/24
                                  v6: 2001:470:ccea:1::1/64

 0) Logout (SSH only)                  9) pfTop
 1) Assign Interfaces                 10) Filter Logs
 2) Set interface(s) IP address       11) Restart webConfigurator
 3) Reset webConfigurator password    12) PHP shell + pfSense tools
 4) Reset to factory defaults         13) Update from console
 5) Reboot system                     14) Disable Secure Shell (sshd)
 6) Halt system                       15) Restore recent configuration
 7) Ping host                         16) Restart PHP-FPM
 8) Shell

Enter an option:

The GUI works ?