PPPoE still not working
-
i can confirm that pppoe doesnt work on both the 14th June release
-
I can confirm this behavior too (Alix hardware - embedded)
1.2.3 RC1 works fine but I had to update due to some ipsec problems solved in the current releases. After the update my pppoe started to drop the connection after a while and refused to reconnect so I had to go back to RC1.
-
Can anybody post logs here?!
Can you even try disableing the filter at all, an option under system advanced, and see if it changes anything?
-
ermal,
If nobody else can get some logs for you here shortly, I can setup a system on a test DSL line I have and get them. I just don't have a PPPoE system at the ready to work with.
-
i can provide logs provided u supply some commands to which i can input and get logs as i am a real newbie to freebsd and secondly when i tried it said something about mpd not firing up in system logs
-
i can provide logs provided u supply some commands to which i can input and get logs as i am a real newbie to freebsd and secondly when i tried it said something about mpd not firing up in system logs
It may be enough to copy/paste what is under system logs, anything starting with or mentioning mpd
From a CLI/console, use: clog /var/log/system.log
That will print out everything in the log, and you could copy/paste that into a text file and attach it.
-
here is what the log says
-
Alix Router - pfSense-1.2.3-20090614-2153.img
–-
*** Welcome to pfSense 1.2.3-RC2-embedded on pfsense ***WAN* -> vr0 -> NONE(PPPoE)
LAN* -> vr1 -> 192.168.0.2---
WAN interface (vr0)
Status up
PPPoE down
system.log
Jan 1 01:17:50 pfsense kernel: vr0: <via 10="" vt6105m="" rhine="" iii="" 100basetx="">port 0x1000-0x10ff mem 0xe0000000-0xe00000ff irq 10 at device 9.0 on pci0
Jan 1 01:17:50 pfsense kernel: vr0: Quirks: 0x2
Jan 1 01:17:50 pfsense kernel: vr0: Revision: 0x96
Jan 1 01:17:50 pfsense kernel: miibus0: <mii bus="">on vr0
Jan 1 01:17:50 pfsense kernel: ukphy0: <generic ieee="" 802.3u="" media="" interface="">PHY 1 on miibus0
Jan 1 01:17:50 pfsense kernel: ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Jan 1 01:17:50 pfsense kernel: vr0: Ethernet address: 00:0d:b9:17:c4:e0
Jan 1 01:17:50 pfsense kernel: vr0: [ITHREAD]
…
Jan 1 01:17:51 pfsense kernel: vr0: link state changed to UP
Jan 1 01:17:51 pfsense mpd: mpd: pid 291, version 3.18 (root@FreeBSD-7_2-RELENG_1_2-snapshots.pfsense.org 00:24 13-Jun-2009)
Jan 1 01:17:51 pfsense mpd: [pppoe] ppp node is "mpd291-pppoe"
Jan 1 01:17:51 pfsense mpd: [pppoe] can't create vjc node: No such file or directory
Jan 1 01:17:51 pfsense mpd: [pppoe] netgraph initialization failed
Jan 1 01:17:51 pfsense mpd: mpd: no bundles defined
Jan 1 01:17:51 pfsense last message repeated 18 times
…system.log full: http://pastebin.com/m32a4fe30</generic></mii></via>
-
with new embedded snapshot pfSense-1.2.3-20090616-0851.img.gz it will work.
-
thank you for the information - will test this after work :)
-
Thank you all !!
will test it today too
can hardly wait for the official release, like to use it in production enviroment
Pfsense rocks !!!!
Regards !
-
tried and tested, works perfectly fine
-
+1 - works ;D
-
1.2.3-RC2 built on Wed Jun 10 09:44:42 EDT 2009
if enable periodic PPPoE resets , reset at each day ('0 0 * * *')
pppoe not respawned after down
Jul 8 00:00:01 pfsense mpd: [pppoe] rec'd signal usr2, closing Jul 8 00:00:01 pfsense mpd: [pppoe] IPCP: Close event Jul 8 00:00:01 pfsense mpd: [pppoe] IPCP: state change Opened --> Closing Jul 8 00:00:01 pfsense mpd: [pppoe] IPCP: SendTerminateReq #4 Jul 8 00:00:01 pfsense mpd: [pppoe] IPCP: LayerDown Jul 8 00:00:01 pfsense mpd: [pppoe] IFACE: Down event Jul 8 00:00:01 pfsense mpd: [pppoe] exec: /usr/local/sbin/ppp-linkdown ng0 inet shraik Jul 8 00:00:01 pfsense mpd: [pppoe] exec: /sbin/route delete 0.0.0.0 87.236.40.69 Jul 8 00:00:01 pfsense mpd: [pppoe] exec: command returned 256 Jul 8 00:00:01 pfsense mpd: [pppoe] exec: /sbin/route delete 87.236.41.27 -iface lo0 Jul 8 00:00:01 pfsense mpd: [pppoe] exec: /sbin/ifconfig ng0 down delete -link0 Jul 8 00:00:01 pfsense mpd: [pppoe] exec: command returned 256 Jul 8 00:00:01 pfsense mpd: [pppoe] can't set bpf node program: No such file or directory Jul 8 00:00:01 pfsense mpd: mpd: fatal error, exiting Jul 8 00:00:01 pfsense mpd: [pppoe] IPCP: Down event Jul 8 00:00:01 pfsense mpd: [pppoe] IPCP: LayerFinish Jul 8 00:00:01 pfsense mpd: [pppoe] IPCP: state change Closing --> Initial Jul 8 00:00:01 pfsense mpd: [pppoe] IFACE: Close event Jul 8 00:00:01 pfsense mpd: [pppoe] IPCP: Close event Jul 8 00:00:01 pfsense mpd: mpd: process 7970 terminatedafter manual Interfaces|Wan|Save link is UP
