How to get pfSense WAN to accept VLAN 0
-
@stephenw10 I don't see the term "vlan" anywhere in that packet capture. My guess (if I did it correctly) is that it's not tagged.
-
Yeah, I'd be amazed if it was and still worked in 22.05. Good to check though.
-
@stephenw10 thanks for guiding me through it.
-
I'll check my frontier 2gig service tonight and report back
-
@michaellacroix Sounds good.
-
@stephenw10 Steve, do you need me to check something? I am one of those stuck under 22.5 and working, everything else did not work as you can see in all my other posts. :-)
-
I can confirm as of this morning, College Station, TX still wants vlan0.
11:34:03.435271 00:00:00:00:00:00 > 00:00:00:00:00:00, ethertype 802.1Q (0x8100), length 60: vlan 0, p 0, ethertype IPv4, (tos 0x0, ttl 246, id 54321, offset 0, flags [none], proto TCP (6), length 40)
xxx.xxx.xxx.72.50650 > xx.xxx.xxx.xxx.3050: Flags [S], cksum 0x8ea1 (correct), seq 1903919664, win 65535, length 0 -
@cucu007 said in How to get pfSense WAN to accept VLAN 0:
I am one of those stuck under 22.5 and working
You are seeing it pull a lease in 22.05?
If not it won't work there with VLAN0 without the netgraph script. You'll need to go to 2.7 or wait for 22.11 snaps (which should be any time now).
Steve
-
@stephenw10
I can confirm in my area frontier is still using vlan 0. Thanks -
The updates look like their coming pretty fast. I'm surprised 22.11 dev isn't available yet
-
@michaellacroix When will 22.11 SS come out?
-
@stephenw10 said in How to get pfSense WAN to accept VLAN 0:
should be any time now
-
-
That is expected until Plus dev snaps are made public. That should be any time now but there will be an announcement when it happens.
-
-
Thanks Stephen, do you know if you clone the boot environment before upgrading to 22.11 DEV you can safely return to 22.05 by going back to that boot copy? I'm unsure if it captures the whole OS or just pfsense in that point in time. Thanks
-
I was just testing that and, yes, that is now possible. I'm not sure if the new bootloader that allows it has made it into snapshots yet but it will be when they go public.
-
Hi Stephen, have you done any testing with QOS on the WAN interface while using the netgraph script? I was going to configure traffic shaping for VOIP but am unable to choose the WAN interface as a selection. Thanks
-
I have not done that. I don't have a WAN that requires. It doesn't surprise me that it wouldn't work though ng is shown as altq capable:
https://github.com/pfsense/pfsense/blob/RELENG_2_6_0/src/etc/inc/interfaces.inc#L6946What error are you seeing?
-
Thanks so much Stephen, I cant wait to be able to use pfsense plus natively without the netgraph script.
