IPsec routing between 3 networks.
-
Hello guys.
The network structure looks like this.
Network A (192.168.88.0/24) -> IPsec -> Network B gateway (192.168.99.0/24) <- IPsec <- Network C (192.168.111.0/24)
There is the following task, from the network from the address 88.115 to access the address from the network 111.103 with port 6666
IPsec in tunnel mode.
I understand what needs to be done through NAT DST / SRC, but for some reason it does not work, traffic in one direction comes back to the gateway (pfSense), but does not return to 88.115.Network B (pfSense) gateway
How can this be done?
-
@operator2024 The problem was resolved through the creation of an additional phase 2
-
@operator2024 Hi
I have same situation, no matter what I do I can't get a second phase 2 to come up when it uses a subnet that doesn't directly exist on a local interface.
could you please tell me what exactly you did so i can compare with my confin my case i have
Palo Alto --- IPsec ---- Pfsense --- IPsec --- AWSPfsense --- IPsec ---- Pfsense --- IPsec --- AWS
both don't work
could you please help
