Install pfsense on RB4011iGS
-
its possible to install pfsense on RB4011iGS+5HacQ2HnD?
-
@foolish86 said in Install pfsense on RB4011iGS:
its possible to install pfsense on RB4011iGS+5HacQ2HnD?
Hi,
Itโs unlikely, as Netgate also has issues with ARM 32bit stuff...
what you need to see yet...:
https://forum.netgate.com/topic/96968/driver-for-atheros-qca986x-988x-802-11ac
for 5G??? wifi
and other
-
No, it would require a specific build to be developed, as most (all?) Arm hardware does.
Steve
-
i dont understand why with mikrotik my download it's 700/800Mbit with APU2 4core 4gb ram, only 260Mbit
-
@foolish86 said in Install pfsense on RB4011iGS:
with APU2 4core 4gb ram, only 260Mbit
Hi,
You're in the right place ( but not in a right topic), if you read my posts I have a lot of APU stuff, what's your concern?
++++edit:
https://teklager.se/en/knowledge-base/apu2-1-gigabit-throughput-pfsense/
-
@daddygo theoretically I have 1 gig of bandwidth.
with apu2 and the same hardware of your guide an AMT GX-412TC 4 core, i download maximum 250megabit.
with a mikrotik, my speed test is 800megabit -
@foolish86 said in Install pfsense on RB4011iGS:
i download maximum 250megabit.
Without OVPN and without running heavy app(s), the APU2 MOBO (w 4GB RAM) knows a speed of nearly 1Gig
so something will be wrong with your settings,
pls. look around here too:
https://forum.netgate.com/topic/95148/pc-engines-apu2-experiences/554?_=1614192201206 -
@foolish86 I don't understand why you would want to put pfSense on a device designed for Mikrotik. I can tell you that pfSense and Mikrotik complement one's network ... in my system, pfSense is the king of my WAN and Mikrotik (RB450x2) is king of my LAN. I have IDS/IPS on pfSense as well as DHCP on Mikrotik for all devices ... even double NAT ... no problem.
-
with Mikrotik the speed is
with PFsense is
-
This post is deleted! -
my problem it's pppoe may be...my pfsense do the pppoe
-
@foolish86 said in Install pfsense on RB4011iGS:
my problem it's pppoe may be...my pfsense do the pppoe
PPPoE should not be a problem for pfSense.
Did you check this? MTU 1492f.e.:
https://www.sonicwall.com/support/knowledge-base/how-can-i-optimize-pppoe-connections/170505851231244/ -
PPPoE absolutely can be a problem for pfSense. It can only use a single receive queue and hence a single CPU core. I would still expect more than 250Mbps on most platforms though.
You should try the tunables shown here:
https://docs.netgate.com/pfsense/en/latest/hardware/tune.html#pppoe-with-multi-queue-nicsSteve
-
@stephenw10 said in Install pfsense on RB4011iGS:
PPPoE absolutely can be a problem for pfSense.
Yup,
Not a good wording,.... this is not a pfSense issue but Multi-Queue NICs + multiple CPU cores, this is a question of all such hardware.
I thought the OP was already beyond reading the pfSense handbook.
But that was the right guideline, it never occurred to me.
-
This post is deleted! -
@daddygo now i tring queue and some settings in the guide
-
@foolish86 with some modify now go 300mbit. not bad, but still missing more 500mbit