can merge speed of 2 wan or more.
-
its possible can merge speed of 2 isp with a speed of:
- 50mbps
- 100mbps
with total of 150mbps it possible?
because my multi wan speedtest is total of 90mbps
isp:
1st. 50mbps
2nd. 100mbps1st isp is static public ip
2nd isp is dhcp. -
@jenskiebee I don't think so. The docs have a specific caveat:
Some firewall features which support gateway groups only support failover, not load balancing. For example, when using a gateway group for the default gateway or as a VPN endpoint, each gateway must be on a separate tier.
Docs indicate that for a gateway group that's the default gateway, each gateway must be on a different tier so you only get failover. For load-balancing they must be on the same tier.
-
The short answer is no... PFsense can't bond the two circuits together to give you 150 Mbps from a single stream.
What PFsense can do... is provide 150 Mbps of aggregate bandwidth out of multiple streams using load balancing.
I have seen appliances out there that will attempt to do what you're asking but to my knowledge... PFsense does not have that functionality.
-
@kom yeah its ok,, I realized or just in my mind if there is a way for that.
-
Bonding can be realized in combination with pfS as today only by a" bonding box"
In front of pfS.... Oh boy I can tell you... A f@#&* pain in the ass
Sometimes its working sometimes not the speed u get a total other ballgame
And a 100+50 is not Givin you 150 its more about a 125 or less
I got 2x100 and the best shot was 160...So now we use loadbalance and everyone is happy except the inner nerd ;)