Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    pfSense HA LAN Interfaces Only

    HA/CARP/VIPs
    2
    91
    16.1k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • C
      CloudNode @viragomann
      last edited by

      @viragomann Thanks; so on my backup PF i did the below:
      c4821726-a187-4e34-a697-59199560e1b7-image.png

      This did not work still then i tried this
      2238c034-3db5-4684-9350-21da03cc81df-image.png

      But this did not work as well.

      V 1 Reply Last reply Reply Quote 0
      • V
        viragomann @CloudNode
        last edited by

        @iptvcld
        Keep the first one.

        Tried to restart the machine?

        If it still doesn't take a packet capture on the LAN interface. You should see periodic pings to 8.8.8.8. As well you should see them on the masters LAN and also on the masters WAN if it works as expected.

        C 1 Reply Last reply Reply Quote 0
        • C
          CloudNode @viragomann
          last edited by

          @viragomann I also just noticed since i made this NAT mode change from auto to hybrid and also adding the mapping on my backup PF; after the reboot, it reverted back to auto and got rid of the mapping as my master sync'd over. Should i be making this change on my master then?

          V 1 Reply Last reply Reply Quote 0
          • V
            viragomann @CloudNode
            last edited by

            @iptvcld
            Yes, you can add this rule to the master as well. It won't be used there anyway.

            C 1 Reply Last reply Reply Quote 0
            • C
              CloudNode @viragomann
              last edited by

              @viragomann i did this on the master now and i saw it synced over to the backup. I rebooted the backup again as well.
              dcb43cb0-d713-43ba-8b64-c9b34c82fc11-image.png

              I ran a packet capture on the LAN (backup pf) and i see a few of these lines. IP: 76.64.x.x is my wan
              10:54:16.598225 IP 76.64.x.x > 8.8.8.8: ICMP echo request, id 13920, seq 321, length 9

              but GW still shows offline
              cbfaf116-dab6-4bb1-b620-ed5fbda515d0-image.png

              When i run a ping to 8.8.8.8 using backup, i get this

              PING 8.8.8.8 (8.8.8.8): 56 data bytes
              64 bytes from 8.8.8.8: icmp_seq=0 ttl=115 time=2.599 ms

              --- 8.8.8.8 ping statistics ---
              3 packets transmitted, 1 packets received, 66.7% packet loss
              round-trip min/avg/max/stddev = 2.599/2.599/2.599/0.000 ms

              V 1 Reply Last reply Reply Quote 0
              • V
                viragomann @CloudNode
                last edited by viragomann

                @iptvcld said in pfSense HA LAN Interfaces Only:

                I ran a packet capture on the LAN (backup pf) and i see a few of these lines. IP: 76.64.x.x is my wan
                10:54:16.598225 IP 76.64.x.x > 8.8.8.8: ICMP echo request, id 13920, seq 321, length 9

                Even if the WAN cable is disconnected??
                I was assuming that the WAN is offline, so not clear, why it use the WAN IP.

                C 1 Reply Last reply Reply Quote 0
                • C
                  CloudNode @viragomann
                  last edited by

                  @viragomann That is correct Sir; i do not have my WAN connected to my backup pf right now

                  8288f915-22ad-4cef-a7e2-8a1e05342ff8-image.png

                  V 1 Reply Last reply Reply Quote 0
                  • V
                    viragomann @CloudNode
                    last edited by

                    @iptvcld
                    Not clear, what's wrong here.
                    As first step for troubleshooting you can remove the monitoring IP from the LAN gateway on the backup. Hence it should monitor the masters LAN and the gateway state should get online.
                    But not sure if the failover will work after.

                    C 2 Replies Last reply Reply Quote 0
                    • C
                      CloudNode @viragomann
                      last edited by

                      @viragomann I ran a packet cap again and i am seeing those monitoring requests come in as well:

                      11:14:31.073869 IP 8.8.8.8.853 > 192.168.2.81.17018: tcp 0
                      11:14:31.073887 IP 76.64.x.x.11762 > 8.8.8.8.853: tcp 0

                      V 1 Reply Last reply Reply Quote 0
                      • C
                        CloudNode @viragomann
                        last edited by

                        @viragomann When i remove the monitoring ip from the GW; yes it puts the master LAN IP in there and yes it shows Green and Online but no internet.

                        Ah i really hoped this would have worked out; was such a nice idea to have.

                        1 Reply Last reply Reply Quote 0
                        • V
                          viragomann @CloudNode
                          last edited by

                          @iptvcld said in pfSense HA LAN Interfaces Only:

                          I ran a packet cap again and i am seeing those monitoring requests come in as well:
                          11:14:31.073869 IP 8.8.8.8.853 > 192.168.2.81.17018: tcp 0
                          11:14:31.073887 IP 76.64.x.x.11762 > 8.8.8.8.853: tcp 0

                          So you're using 8.8.8.8 for DNS resolution as well.
                          Possibly that's an issue when you've stated the WAN gateway in System > General Setup.
                          However, when using this IP for gateway monitoring, pfSense will automatically add a static route and point it to the respective gateway. So there might be a conflict.

                          As mentioned above, you can use any other public IP for gateway monitoring which is responding to pings. It might be a good idea, to use another IP.

                          Also you should have a check at System > Advanced > Miscellaneous > State Killing on Gateway Failure.

                          For further testing you can set the WAN gateway as down manually on the backup.

                          C 1 Reply Last reply Reply Quote 0
                          • C
                            CloudNode @viragomann
                            last edited by

                            @viragomann Correct; i am using 8.8.8.8 and 8.8.4.4 as DNS Res via system > gateway.

                            I have now changed my GW monitoring IP to 1.1.1.1 on the secondary pf. Also on the secondary pf i have placed a CHECK under System > Advanced > Miscellaneous > State Killing on Gateway Failure.

                            When i try to ping 8.8.8.8 from the secondary; i get this timeout

                            PING 8.8.8.8 (8.8.8.8): 56 data bytes
92 bytes from 127.0.0.1: Time to live exceeded
Vr HL TOS  Len   ID Flg  off TTL Pro  cks      Src      Dst
 4  5  00 0054 263f   0 0000  01  01 0000 127.0.0.1  8.8.8.8 

92 bytes from 127.0.0.1: Time to live exceeded
Vr HL TOS  Len   ID Flg  off TTL Pro  cks      Src      Dst
 4  5  00 0054 b74f   0 0000  01  01 0000 127.0.0.1  8.8.8.8 

92 bytes from 127.0.0.1: Time to live exceeded
Vr HL TOS  Len   ID Flg  off TTL Pro  cks      Src      Dst
 4  5  00 0054 66ba   0 0000  01  01 0000 127.0.0.1  8.8.8.8 


--- 8.8.8.8 ping statistics ---
3 packets transmitted, 0 packets received, 100.0% packet loss

                            I have marked my PPPOE WAN as down on the 2nd pf as well.
                            This is so bizarre..
                            I also have just an open rule for LAN
                            6de4178c-6b2a-4d7d-ad19-2afa3c0c36dc-image.png

                            V 1 Reply Last reply Reply Quote 0
                            • V
                              viragomann @CloudNode
                              last edited by

                              @iptvcld said in pfSense HA LAN Interfaces Only:

                              When i try to ping 8.8.8.8 from the secondary; i get this timeout

                              You cannot use 8.8.8.8 for troubleshooting, since you direct it to WAN gateway.
                              However, for getting the DNS resolution work on the secondary when the WAN cable is connected to the primary, you should set the gateway to "none" for all DNS servers in System > General Setup.

                              I have now changed my GW monitoring IP to 1.1.1.1 on the secondary pf.

                              So try to ping 1.1.1.1 while taking a capture on the LAN interface.

                              C 1 Reply Last reply Reply Quote 0
                              • C
                                CloudNode @viragomann
                                last edited by

                                @viragomann My master pf DNS settings like like this
                                c34d0b73-4620-42e5-a695-24d1dc4b5a81-image.png

                                and secondary pf is the same
                                f3bcfe38-b3c2-43f3-9bcc-59509a4ac5dd-image.png

                                When i ping 1.1.1.1 in seconday the packet capture just gave this

                                12:57:15.477198 IP 192.168.2.81 > 1.1.1.1: ICMP echo request, id 18433, seq 797, length 9
                                V 1 Reply Last reply Reply Quote 0
                                • V
                                  viragomann @CloudNode
                                  last edited by

                                  @iptvcld said in pfSense HA LAN Interfaces Only:

                                  When i ping 1.1.1.1 in seconday the packet capture just gave this
                                  12:57:15.477198 IP 192.168.2.81 > 1.1.1.1: ICMP echo request, id 18433, seq 797, length 9

                                  You should see the same on the masters LAN. Check that out, please.

                                  C 1 Reply Last reply Reply Quote 0
                                  • C
                                    CloudNode @viragomann
                                    last edited by

                                    @viragomann thats correct; i just ran a packet cap on master LAN and then sent a 1.1.1.1 ping from the secondary pf

                                    13:05:44.735976 IP 192.168.2.81 > 1.1.1.1: ICMP echo request, id 18433, seq 1785, length 9
                                    V 1 Reply Last reply Reply Quote 0
                                    • V
                                      viragomann @CloudNode
                                      last edited by

                                      @iptvcld
                                      Well, so 1.1.1.1 is routed to the masters LAN address.
                                      Now, if you take a capture on the masters WAN you should also see the ICMP packets to 1.1.1.1, but coming from the WAN IP.

                                      If that's not the case, either the firewall rule or the outbound NAT on the master might failing anyhow.

                                      C 3 Replies Last reply Reply Quote 0
                                      • C
                                        CloudNode @viragomann
                                        last edited by

                                        @viragomann Ran a packet cap on master and i see this request 3 times

                                        13:10:40.370864 IP 192.168.2.81 > 1.1.1.1: ICMP echo request, id 18433, seq 2360, length 9

                                        seems to be coming from the secondary pf LAN IP still and not the WAN IP

                                        Outbound NAT on master is this:
                                        525a045c-3692-4aaa-a82a-e04d3aa486ca-image.png

                                        And LAN Rules
                                        a368e097-3a10-4ad5-9bd4-8c50a2666839-image.png

                                        1 Reply Last reply Reply Quote 0
                                        • C
                                          CloudNode @viragomann
                                          last edited by

                                          @viragomann Ran it again and i see this

                                          13:17:05.527815 IP 76.64.x.x > 1.1.1.1: ICMP echo request, id 55322, seq 0, length 64
13:17:05.542715 IP 1.1.1.1 > 76.64.x.x: ICMP echo reply, id 55322, seq 0, length 64

                                          then

                                          13:17:05.562166 IP 192.168.2.81 > 1.1.1.1: ICMP echo request, id 34782, seq 78, length 9

                                          PING 1.1.1.1 (1.1.1.1): 56 data bytes
                                          64 bytes from 1.1.1.1: icmp_seq=0 ttl=55 time=15.187 ms

                                          --- 1.1.1.1 ping statistics ---
                                          3 packets transmitted, 1 packets received, 66.7% packet loss
                                          round-trip min/avg/max/stddev = 15.187/15.187/15.187/0.000 ms

                                          V 1 Reply Last reply Reply Quote 0
                                          • C
                                            CloudNode @viragomann
                                            last edited by

                                            @viragomann Does this need to be unchecked under my WAN interface?
                                            Block private networks and loopback addresses

                                            fc8b8c33-e5c7-4253-ac68-050b04b1b2a9-image.png

                                            V 1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post