2.5 Gbps Hardware
-
As noted connected to the 1gb port on the same box, the built in Realtek LAN port, worked fine.
"re0" woulda stayed the same though......I didn't put more Realtek based cards in.
Now that I have, like I did before and removed them, rules for each card, member of the bridge, can I remove the LAN rule I created?
The Asus AX86U which worked when those two clients were connected to its 1gb ports, what I didn't do was plug one of those clients into the 2.5gb port the Asus AX86U was connected to.
That's the one 2.5gb port I didn't test.
-
If you moved filtering from the bridge interface to the member interfaces then you don't need a rule on the assigned bridge interface, but it doesn't hurt to leave it there.
-
Thanks. It is getting traffic at least the counter is showing so.
-
For kicks I set everything back the way it was for the tunable to track the bridge, not member interfaces, and had just the LAN firewall rule enabled.
It works for all clients.
-
J JimBob Indiana referenced this topic on
