Send Traffic from 1 host to a specific GW
-
@steveits While agree with your for sure - he is clearly behind a nat with that 192.168.1.21 address - so unless they are port forwarding to him, or he has something setup on the isp device I don't see how any inbound could come in unsolicited.
-
@johnpoz said in Send Traffic from 1 host to a specific GW:
behind a nat with that 192.168.1.21
I missed that, never mind. Unless it's set as a DMZ.
The bigger picture point is probably that an inbound rule on an interface won't affect outbound traffic. -
@steveits said in Send Traffic from 1 host to a specific GW:
The bigger picture point is probably that an inbound rule on an interface won't affect outbound traffic.
Very true and good point..
-
@johnpoz
Hi All, I made many tests as suggested and still nothing .
Today, found that the IP allocated as "wan" to the 3G router is 10. X.Y.Z.
Is there anything in PFSense preventing RFC1918 and all non routable network restrictions ?
Found some doc , doesn't seem to be relevant, but I'm doublechecking ..
Thx -
@smalldragoon said in Send Traffic from 1 host to a specific GW:
anything in PFSense preventing RFC1918
Each interface has a "Block private networks and loopback addresses" checkbox but that would normally be for inbound traffic.
