Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Qotom Mini PCs - Discrete ports

    Scheduled Pinned Locked Moved
    Off-Topic & Non-Support Discussion
    4
    7
    1.6k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • S
      sequimite
      last edited by

      Hi,

      I'm new to the forum. Does anyone know if the mulitple NICs in Qotom boxes show up in pfsense as discrete interfaces, or are they switched?

      bingo600B M 2 Replies Last reply Reply Quote 0
      • P
        Patch
        last edited by

        @sequimite discrete interfaces is the most common but can't be sure all are designed that way.
        What is the NIC interface specified on the board you are interested in?

        1 Reply Last reply Reply Quote 0
        • S
          sequimite
          last edited by

          @patch, this is the description in the product info:

          Onboard LAN:4 x Intel I211-AT- 10/100/1000 Controller

          I just can't tell if they are independent or switched.

          P 1 Reply Last reply Reply Quote 0
          • P
            Patch @sequimite
            last edited by

            @sequimite said in Qotom Mini PCs - Discrete ports:

            4 x Intel I211-AT

            Give the Intel I211-AT is a PCIe v2.1 devices on a single board computer, the four I211-AT are very likely to be switch at the PCIe bus and not sit on a separate common bus with a low bandwidth link to the microprocessor chip.

            1 Reply Last reply Reply Quote 0
            • bingo600B
              bingo600 @sequimite
              last edited by

              @sequimite said in Qotom Mini PCs - Discrete ports:

              Hi,

              I'm new to the forum. Does anyone know if the mulitple NICs in Qotom boxes show up in pfsense as discrete interfaces, or are they switched?

              I have no idea if you are asking if they are L2 interfaces or ....
              My Qotom Intel-211 interfaces are detected as 4 individual L3 interfaces.

              /Bingo

              If you find my answer useful - Please give the post a šŸ‘ - "thumbs up"

              pfSense+ 23.05.1 (ZFS)

              QOTOM-Q355G4 Quad Lan.
              CPUĀ  : Core i5 5250U, Ram : 8GB Kingston DDR3LV 1600
              LANĀ  : 4 x Intel 211, DiskĀ  : 240G SAMSUNG MZ7L3240HCHQ SSD

              S 1 Reply Last reply Reply Quote 1
              • S
                sequimite @bingo600
                last edited by

                @bingo600, thanks.

                1 Reply Last reply Reply Quote 0
                • M
                  Making_sense_of_pfSense @sequimite
                  last edited by

                  @sequimite
                  Hi, I bought my Qotom Mini PC in Sept 2018.
                  Here is the full output of dmesg, if you want to dig deeper.

                  [2.5.2-RELEASE][root@pfsense.lan]/root: dmesg
---<<BOOT>>---
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.2-STABLE fd0f54f44b5c(RELENG_2_5_0) pfSense amd64
FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
VT(efifb): resolution 1920x1080
CPU: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz (2294.74-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306d4  Family=0x6  Model=0x3d  Stepping=4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0x21c2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,RDSEED,ADX,SMAP,PROCTRACE>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 4294967296 (4096 MB)
avail memory = 3999698944 (3814 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
random: unblocking device.
WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS.
WARNING: Bogus Interrupt Polarity. Assume CONFORMS
WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS.
WARNING: Bogus Interrupt Polarity. Assume CONFORMS
ioapic0 <Version 2.0> irqs 0-39 on motherboard
Launching APs: 1 2 3
Timecounter "TSC-low" frequency 1147368110 Hz quality 1000
wlan: mac acl policy registered
random: entropy device external interface
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff8073dd40, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff8073ddf0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff8073dea0, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff80765730, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff807657e0, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80765890, 0) error 1
000.000018 [4336] netmap_init               netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff8140c3e0, 0) error 19
kbd1 at kbdmux0
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
[ath_hal] loaded
mlx5en: Mellanox Ethernet driver 3.5.2 (September 2019)
nexus0
efirtc0: <EFI Realtime Clock> on motherboard
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto> on motherboard
padlock0: No ACE support.
acpi0: <ALASKA A M I > on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Broadwell HDA Controller> mem 0xf7514000-0xf7517fff irq 16 at device 3.0 on pci0
xhci0: <Broadwell Integrated PCH-LP chipset USB 3.0 controller> mem 0xf7500000-0xf750ffff irq 21 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
hdac1: <Intel Broadwell HDA Controller> mem 0xf7510000-0xf7513fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xe000-0xe01f mem 0xf7400000-0xf741ffff,0xf7420000-0xf7423fff irq 16 at device 0.0 on pci1
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 2 RX queues 2 TX queues
igb0: Using MSI-X interrupts with 3 vectors
igb0: Ethernet address: 40:62:31:01:77:82
igb0: netmap queues/slots: TX 2/1024, RX 2/1024
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xd000-0xd01f mem 0xf7300000-0xf731ffff,0xf7320000-0xf7323fff irq 17 at device 0.0 on pci2
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 2 RX queues 2 TX queues
igb1: Using MSI-X interrupts with 3 vectors
igb1: Ethernet address: 40:62:31:01:77:83
igb1: netmap queues/slots: TX 2/1024, RX 2/1024
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
igb2: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xc000-0xc01f mem 0xf7200000-0xf721ffff,0xf7220000-0xf7223fff irq 18 at device 0.0 on pci3
igb2: Using 1024 TX descriptors and 1024 RX descriptors
igb2: Using 2 RX queues 2 TX queues
igb2: Using MSI-X interrupts with 3 vectors
igb2: Ethernet address: 40:62:31:01:77:84
igb2: netmap queues/slots: TX 2/1024, RX 2/1024
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci4: <ACPI PCI bus> on pcib4
igb3: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xb000-0xb01f mem 0xf7100000-0xf711ffff,0xf7120000-0xf7123fff irq 19 at device 0.0 on pci4
igb3: Using 1024 TX descriptors and 1024 RX descriptors
igb3: Using 2 RX queues 2 TX queues
igb3: Using MSI-X interrupts with 3 vectors
igb3: Ethernet address: 40:62:31:01:77:85
igb3: netmap queues/slots: TX 2/1024, RX 2/1024
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci5: <ACPI PCI bus> on pcib5
ath0: <Atheros 9287> mem 0xf7000000-0xf700ffff irq 16 at device 0.0 on pci5
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 stream STBC transmit enabled
ath0: [HT] 2 RX streams; 2 TX streams
ath0: AR9287 mac 384.2 RF5133 phy 15.15
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
ehci0: <Intel Wildcat Point-LP USB 2.0 controller> mem 0xf751a000-0xf751a3ff irq 23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Wildcat Point-LP AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7519000-0xf75197ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounters tick every 1.000 msec
hdacc0: <Intel Broadwell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Broadwell Audio Function Group> at nid 1 on hdacc0
pcm0: <Intel Broadwell (HDMI/DP 8ch)> at nid 3 on hdaa0
hdacc1: <Realtek ALC662 rev3 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC662 rev3 Audio Function Group> at nid 1 on hdacc1
hdaa1: No presence detection support at nid 27
pcm1: <Realtek ALC662 rev3 (Analog 2.0+HP/2.0)> at nid 20,27 and 24,25 on hdaa1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
Trying to mount root from ufs:/dev/gptid/9c856434-c67b-11e8-8e1f-406231017782 [rw]...
Root mount waiting for: usbus0 usbus1 CAM
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 15 ports with 15 removable, self powered
uhub1: 2 ports with 2 removable, self powered
Root mount waiting for: usbus1 CAM
ugen1.2: <vendor 0x8087 product 0x8001> at usbus1
uhub2 on uhub1
uhub2: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.03, addr 2> on usbus1
uhub2: 8 ports with 8 removable, self powered
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Hoodisk SSD SBFM01.2> ACS-4 ATA SATA 3.x device
ada0: Serial Number J7DTC7A21276330
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 30533MB (62533296 512 byte sectors)
mountroot: waiting for device /dev/gptid/9c856434-c67b-11e8-8e1f-406231017782...
CPU: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz (2294.74-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306d4  Family=0x6  Model=0x3d  Stepping=4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0x21c2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,RDSEED,ADX,SMAP,PROCTRACE>
  Structured Extended Features3=0x9c000600<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
padlock0: No ACE support.
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
lo0: link state changed to UP
vlan0: changing name to 'igb0.4'
vlan1: changing name to 'igb0.5'
ng0: changing name to 'pppoe0'
igb0: link state changed to UP
igb0.4: link state changed to UP
igb0.5: link state changed to UP
tun1: changing name to 'ovpns1'
ovpns1: link state changed to UP
pflog0: promiscuous mode enabled
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
load_dn_sched dn_sched PRIO loaded
load_dn_sched dn_sched FQ_CODEL loaded
load_dn_sched dn_sched FQ_PIE loaded
load_dn_aqm dn_aqm CODEL loaded
load_dn_aqm dn_aqm PIE loaded
igb3: link state changed to UP
igb0: link state changed to DOWN
igb0.4: link state changed to DOWN
igb0.5: link state changed to DOWN
igb0: link state changed to UP
igb0.4: link state changed to UP
igb0.5: link state changed to UP
igb0: link state changed to DOWN
igb0.4: link state changed to DOWN
igb0.5: link state changed to DOWN
igb0: link state changed to UP
igb0.4: link state changed to UP
igb0.5: link state changed to UP
ng_pppoe[15]: no matching session
igb3: link state changed to DOWN
igb3: link state changed to UP
ng0: changing name to 'pppoe0'
igb3: link state changed to DOWN
igb3: link state changed to UP
ng0: changing name to 'pppoe0'
igb3: link state changed to DOWN
igb3: link state changed to UP
ng0: changing name to 'pppoe0'
igb3: link state changed to DOWN
igb3: link state changed to UP
ng0: changing name to 'pppoe0'
igb0: link state changed to DOWN
igb0.4: link state changed to DOWN
igb0.5: link state changed to DOWN
igb0: link state changed to UP
igb0.4: link state changed to UP
igb0.5: link state changed to UP

                  Running pfSense Community Edition 2.7.2 on a Qotom Mini PC.

                  1 Reply Last reply Reply Quote 0
                  • First post
                    Last post