Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Long boots after 22.01 update on SG-3100 with pfBlockerng

    Scheduled Pinned Locked Moved
    pfBlockerNG
    4
    27
    2.2k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • lohphatL
      lohphat @stephenw10
      last edited by

      @stephenw10 No patches loaded. I should probably remove it as it was only installed for the old PHP bug.

      I have what I'd consider basic pfB rules.

      1 Reply Last reply Reply Quote 0
      • lohphatL
        lohphat @stephenw10
        last edited by

        @stephenw10 So I did the update to System Patches and disabled pfB-devel and still got the delay. (FYI, it didn't delay this way in the last firmware release.)

        But the Ctrl-T list is a bit different with pfB-devel disabled:

        Starting CRON... done.
 Starting package ntopng...done.
 Starting package Avahi...done.
 Starting package OpenVPN Client Export Utility...done.
 Starting package System Patches...done.
load: 1.55  cmd: fcgicli 91461 [sbwait] 30.31r 0.00u 0.00s 0% 2088k
load: 1.46  cmd: fcgicli 91461 [sbwait] 40.95r 0.00u 0.00s 0% 2088k
load: 1.39  cmd: fcgicli 91461 [sbwait] 49.12r 0.00u 0.00s 0% 2088k
load: 1.36  cmd: fcgicli 91461 [sbwait] 54.33r 0.00u 0.00s 0% 2088k
load: 1.41  cmd: sleep 89616 [nanslp] 0.53r 0.00u 0.00s 0% 1908k
load: 1.38  cmd: sleep 89616 [nanslp] 4.35r 0.00u 0.00s 0% 1912k
load: 1.35  cmd: fcgicli 91461 [sbwait] 71.00r 0.00u 0.00s 0% 2088k
load: 1.32  cmd: fcgicli 91461 [sbwait] 74.36r 0.00u 0.00s 0% 2088k
load: 1.37  cmd: fcgicli 91461 [sbwait] 79.15r 0.00u 0.00s 0% 2088k
load: 1.34  cmd: fcgicli 91461 [sbwait] 84.16r 0.00u 0.00s 0% 2088k
load: 1.34  cmd: fcgicli 91461 [sbwait] 88.01r 0.00u 0.00s 0% 2088k
load: 1.31  cmd: fcgicli 91461 [sbwait] 92.50r 0.00u 0.00s 0% 2088k
load: 1.29  cmd: fcgicli 91461 [sbwait] 97.60r 0.00u 0.00s 0% 2088k
load: 1.27  cmd: fcgicli 91461 [sbwait] 102.41r 0.00u 0.00s 0% 2088k
load: 1.24  cmd: fcgicli 91461 [sbwait] 106.22r 0.00u 0.00s 0% 2088k
 Starting package pfBlockerNG-devel...done.
 Starting /usr/local/etc/rc.d/pfb_dnsbl.sh...done.
 Starting /usr/local/etc/rc.d/pfb_filter.sh...done.
Netgate pfSense Plus 22.01-RELEASE arm Mon Feb 07 16:39:01 UTC 2022
Bootup complete

        I will now try again with System Patches removed, then I'll try removing pfB-devel (keeping settings).

        1 Reply Last reply Reply Quote 0
        • lohphatL
          lohphat @stephenw10
          last edited by

          @stephenw10 pfB-devel seems to be the culprit.

          Disabling didn't have an effect but after I removed the package, the boot sped through the CRON startup section as expected.

          However, with the package removed, the following lines appeared in the boot console even after several reboots.

          Loading configuration......done.
sh: /usr/local/pkg/pfblockerng/pfblockerng.sh: not found
Updating configuration...done.

          I'm reinstalling the package now to see if that clears the behavior.

          1 Reply Last reply Reply Quote 0
          • lohphatL
            lohphat @stephenw10
            last edited by

            @stephenw10

            Confirming that re-installing the current pfBlocker-devel causes the boot delay to return even if the package is disabled.

            I'd be fine if this thread were moved to the appropriate module forum.

            1 Reply Last reply Reply Quote 0
            • stephenw10S stephenw10 moved this topic from Official Netgate® Hardware on
            • stephenw10S
              stephenw10 Netgate Administrator
              last edited by

              You might try the patch for pfctl latency anyway. See if that makes any difference to the boot times.

              lohphatL 1 Reply Last reply Reply Quote 0
              • lohphatL
                lohphat @stephenw10
                last edited by

                @stephenw10 Unfamiliar with that patch. Link?

                GertjanG 1 Reply Last reply Reply Quote 0
                • GertjanG
                  Gertjan @lohphat
                  last edited by

                  @lohphat said in Long boots after 22.01 update on SG-3100 with pfBlockerng:

                  Link

                  Install the System_Patches, version 2.0_2.
                  Go to System > Patches
                  Probably this one :

                  7703dec3-8933-451c-aead-9106d8e56617-image.png

                  ( part of the " Recommended System Patches for Netgate pfSense® software version 2.6.0 " list )

                  No "help me" PM's please. Use the forum, the community will thank you.
                  Edit : and where are the logs ??

                  lohphatL 1 Reply Last reply Reply Quote 1
                  • lohphatL
                    lohphat @Gertjan
                    last edited by

                    @gertjan

                    Still long delay during boot after applying patch:

                    Starting CRON... done.
 Starting package ntopng...done.
 Starting package Avahi...done.
 Starting package OpenVPN Client Export Utility...done.
 Starting package System Patches...done.
load: 1.20  cmd: php-cgi 62419 [nanslp] 7.64r 0.74u 0.12s 3% 32304k
load: 1.18  cmd: php-cgi 62419 [nanslp] 11.46r 0.74u 0.12s 2% 32304k
load: 1.18  cmd: php-cgi 62419 [nanslp] 14.91r 0.74u 0.12s 1% 32304k
load: 1.17  cmd: php-cgi 62419 [nanslp] 18.47r 0.74u 0.12s 0% 32304k
load: 1.15  cmd: php-cgi 62419 [nanslp] 22.77r 0.74u 0.12s 0% 32304k
load: 1.14  cmd: php-cgi 62419 [nanslp] 26.28r 0.74u 0.12s 0% 32304k
load: 1.14  cmd: php-cgi 62419 [nanslp] 29.63r 0.74u 0.12s 0% 32304k
load: 1.13  cmd: sh 99162 [wait] 36.16r 0.00u 0.06s 0% 2408k
load: 1.12  cmd: sh 99162 [wait] 38.75r 0.00u 0.06s 0% 2408k
load: 1.12  cmd: sh 99162 [wait] 41.85r 0.00u 0.06s 0% 2408k
load: 1.11  cmd: sh 99162 [wait] 44.27r 0.00u 0.06s 0% 2408k
load: 1.11  cmd: sh 99162 [wait] 46.87r 0.00u 0.06s 0% 2408k
load: 1.10  cmd: sh 99162 [wait] 49.87r 0.00u 0.06s 0% 2408k
load: 1.09  cmd: sh 99162 [wait] 53.35r 0.00u 0.06s 0% 2408k
load: 1.09  cmd: sh 99162 [wait] 56.46r 0.00u 0.06s 0% 2408k
load: 1.08  cmd: sh 99162 [wait] 59.37r 0.00u 0.06s 0% 2408k
load: 1.08  cmd: sh 99162 [wait] 62.32r 0.00u 0.06s 0% 2408k
load: 1.08  cmd: sleep 91323 [runnable] 0.00r 0.00u 0.00s 0% 1852k
load: 1.07  cmd: sh 99162 [wait] 68.90r 0.00u 0.13s 0% 2404k
load: 1.07  cmd: sleep 91323 [nanslp] 6.62r 0.00u 0.00s 0% 1912k
load: 1.07  cmd: sh 99162 [wait] 75.85r 0.00u 0.13s 0% 2404k
load: 1.06  cmd: sh 99162 [wait] 79.77r 0.00u 0.13s 0% 2404k
load: 1.06  cmd: sh 99162 [wait] 83.12r 0.00u 0.13s 0% 2404k
load: 1.06  cmd: sh 99162 [wait] 86.71r 0.00u 0.13s 0% 2404k
load: 1.05  cmd: sh 99162 [wait] 90.06r 0.00u 0.13s 0% 2404k
load: 1.05  cmd: sh 99162 [wait] 93.93r 0.00u 0.13s 0% 2404k
load: 1.04  cmd: sh 99162 [wait] 97.54r 0.00u 0.13s 0% 2404k
load: 1.04  cmd: sh 99162 [wait] 101.57r 0.00u 0.13s 0% 2404k
load: 1.04  cmd: sh 99162 [wait] 105.56r 0.00u 0.13s 0% 2404k
load: 1.04  cmd: sh 99162 [wait] 109.68r 0.00u 0.13s 0% 2404k
 Starting package pfBlockerNG-devel...done.
 Starting /usr/local/etc/rc.d/pfb_dnsbl.sh...done.
 Starting /usr/local/etc/rc.d/pfb_filter.sh...done.
Netgate pfSense Plus 22.01-RELEASE arm Mon Feb 07 16:39:01 UTC 2022
Bootup complete
                    1 Reply Last reply Reply Quote 0
                    • stephenw10S
                      stephenw10 Netgate Administrator
                      last edited by

                      Does it do the same if you restart the service? Or running forced update or reload in pfBlocker?

                      lohphatL 1 Reply Last reply Reply Quote 0
                      • lohphatL
                        lohphat @stephenw10
                        last edited by

                        @stephenw10 The boot would delay even if the package was disabled.

                        I've run the reload and is completes in 10-15 seconds.

                        1 Reply Last reply Reply Quote 0
                        • stephenw10S
                          stephenw10 Netgate Administrator
                          last edited by

                          If the aliases are present it may still be populating them even when disabled. Do you have a load of things selected in pfBlocker? It could be having to time-out on some if they are not responding.

                          Steve

                          lohphatL 1 Reply Last reply Reply Quote 0
                          • lohphatL
                            lohphat @stephenw10
                            last edited by

                            @stephenw10 I can reload sources in 10-15 seconds when it's up and running.

                            Also, why wouldn't "Starting package pfBlockerNG-devel..." display while it is processing and then print "done.\n" when finished after the long delay? It's hanging for several minutes at boot then prints the entire line "Starting package pfBlockerNG-devel...done." all at once -- even if the package is disabled.

                            1 Reply Last reply Reply Quote 0
                            • stephenw10S
                              stephenw10 Netgate Administrator
                              last edited by

                              Well it depends how that script is run. What I suspect is that the actual service the pfBlocker installs starts pretty much instantly. The aliases are not a service though. It's probably trying to populate those before it tries to start 'pfBlockerNG DNSBL Web Server'.

                              Steve

                              lohphatL 1 Reply Last reply Reply Quote 0
                              • lohphatL
                                lohphat @stephenw10
                                last edited by lohphat

                                @stephenw10

                                FOUND IT!

                                It's related to "pfBlockerNG-devel: Version 3.1.0_2 - Fix for #12706" topic.

                                If /tmp and /var are set to use a ramdisk then the long boot delay appears. Disabling it results in no delay.

                                1 Reply Last reply Reply Quote 1
                                • lohphatL
                                  lohphat
                                  last edited by

                                  This post is deleted!
                                  1 Reply Last reply Reply Quote 0
                                  • lohphatL
                                    lohphat
                                    last edited by lohphat

                                    The 3.1.0_2 update did not fix the long boot delay.

                                    The Ctrl-T process output at the hang point is similar.

                                    1 Reply Last reply Reply Quote 0
                                    • lohphatL
                                      lohphat
                                      last edited by lohphat

                                      Note: there seems to be a v3.1.0_3 on its way...

                                      1 Reply Last reply Reply Quote 0
                                      • lohphatL
                                        lohphat
                                        last edited by

                                        Just updated to 3.1.0_4 and the delay at boot is still happening if the ramdisk for /etc and /var are enabled.

                                        C 1 Reply Last reply Reply Quote 0
                                        • C
                                          cantor @lohphat
                                          last edited by cantor

                                          @lohphat

                                          For me 3.1.0_4 works. With ramdisk enabled rebooting of the system (22.01) takes about. 80 s.

                                          lohphatL 1 Reply Last reply Reply Quote 0
                                          • lohphatL
                                            lohphat @cantor
                                            last edited by lohphat

                                            @cantor

                                            To be clear, the WebConfigurator UI comes up fine but the boot isn't complete.

                                            Here's more interesting data (BTW, using unbound in python mode and pfBlocker python extensions enabled):

                                            1. Long boot even if 3.1.0_4 is installed but disabled.

                                            2. Short boot when I remove the package entirely.

                                            3. I noticed that when I reinstalled 3.1.0_4 (retaining old configs) that during the reinstall the message:
                                              "Executing custom_php_resync_config_command()..."
                                              was taking about the SAME TIME time as the boot delay.

                                            So this time I removed the package and DID NOT save my prior config and reinstalled so I'd have a blank config.

                                            The boot time was short.

                                            AHA!

                                            So it seems my old config was the culprit.

                                            I am now rebuilding my config (I have a dual WAN and multiple internal network segments, e.g. IoT corralled on own SSID) so it will take some time.

                                            I will report back if the long delay returns again.

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post