Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    XG-7100: Can't get pppoe to work, any advice?

    Scheduled Pinned Locked Moved Routing and Multi WAN
    6 Posts 2 Posters 1.0k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • P
      pgs
      last edited by pgs

      Hello,

      I just cant't get ppoe to work and am on my wit's end, so any ideas or hints would be very appreciated.

      I run a XG7100 with pfsense+ 22.01-RELEASE. I have two WAN connections, one is a cable router on ETH1 which runs flawlessly already, but not in bridged mode (the router can not be run in bridge mode).

      The LAN side runs via the SFP0 interface cinnected to my main switch (Cisco SG350x). Several VLANS are configured, all fine.

      Now I have a separate DSL line as a fallback which I cannot get to run. It should be run on ETH2. Remark: I ran the similar setup at another location with an SG-2440 already with noc problems.

      Al right, so here is my setup before adding the DSL line:

      c4b8ceee-3373-4c58-a698-b3ef4bf72fe1-grafik.png

      42f0b17e-ff2a-41b3-92ce-46ffe55de799-grafik.png

      ed8df9f6-95ba-4224-a31e-76340b49eea5-grafik.png

      f1075aa8-3367-4194-bd15-34582bf9e4d3-grafik.png

      d802416f-a6b0-4e44-b590-4d4347d2aea4-grafik.png

      As said, runs fine.

      Now I set up my DSL (Draytek Vigor 130) modem to run in pppoe passthrough, so it acts like a modem only, and I set the VLAN tag to 7 (required on my line). Basically, that's the same setup like at my previous location. Remark: I also tried the whole thing with an Fritz!Box 7400 in bridge mode to make sure it's not the modem, but none did work. And another remark: When running the modems in "consumer mode" they all connect to the DSL line, so the DSL lien works and the credentials are correct.

      Next I added the VLAN 7 (called pppoeVLAN7) to the ports 2,9,10 (similar to the WAN VLAN setup):
      a1102dcb-62a6-4b61-93fe-1498d0447ce3-grafik.png !

      Then I changed the ETH2 PVID to 7. At this time, the modem is already connected physically, so the port status is active:
      b627fb0c-ff9f-431e-be95-a12c7b0c7290-grafik.png

      Next, I added a VLAN interface for the pppoe VLAN with parent inrterace lagg0:
      7b9d4da0-af14-4ea2-9dd9-a5db4f7137a2-grafik.png

      Next I created a new interface based on the network port VLAN 7 on lagg0, it's named OPT7 for now:
      9f7fb5d8-355a-43d1-bd9e-827c4423d880-grafik.png

      758769ae-29f4-427c-bc9b-7c197e334988-grafik.png

      I the enabled OPT7 and et it up to PPPEO including credentials:

      fde6fc23-5ac7-4770-a8c9-982f94c47510-grafik.png
      9edc95a0-1450-4000-a5c9-01b12d51ea03-grafik.png

      Short check unter Interfaces / PPPs: Setup is there, also. Again, this pppoe / PPP setup is the same like on the previous PFSense appliance at the prevoius location.
      feb1721f-8a8b-4af0-8437-9201d5501440-grafik.png
      40ae9576-9908-4e64-85a7-8b0de4cc9863-grafik.png
      61385364-3773-4c52-8a12-090072070a93-grafik.png

      Under Interfaces / Interfaces Assignements, the network port of OPT7 now has changed itself from "VLAN7 on lagg0 (pppoeVLAN7)" (see further up) to "PPPOE(lagg0.7) - <CREDENTIALS>". I don't change that for now.
      e473d96c-1680-4b4a-9840-b636b6e004eb-grafik.png

      In my opinion, the pppoe / DSL line should now go online, but it does not. Syslog says:

      LCP: Down event 
      Link: DOWN event 
      PPPoE connection timeout after 9 seconds 
      PPPoE: Connecting to '' 
      

      and tries to reconnect several times, all with result LCP: Down event and Link: DOWN event

      When I change the Interface assignemnt from "PPPOE(lagg0.7) - <CREDENTIALS>" back to "VLAN7 on lagg0 (pppoeVLAN7)" nothing changes.

      All right, so where is my error?

      Thanks all for any advice.

      fireodoF 1 Reply Last reply Reply Quote 0
      • fireodoF
        fireodo @pgs
        last edited by

        @pgs said in XG-7100: Can't get pppoe to work, any advice?:

        Now I set up my DSL (Draytek Vigor 130) modem to run in pppoe passthrough, so it acts like a modem only, and I set the VLAN tag to 7 (required on my line).

        It seems that you have Tag7 on the Modem AND the pfsense - you should get it off on the modem ...

        Kettop Mi4300YL CPU: i5-4300Y @ 1.60GHz RAM: 8GB Ethernet Ports: 4
        SSD: SanDisk pSSD-S2 16GB (ZFS) WiFi: WLE200NX
        pfsense 2.8.0 CE
        Packages: Apcupsd, Cron, Iftop, Iperf, LCDproc, Nmap, pfBlockerNG, RRD_Summary, Shellcmd, Snort, Speedtest, System_Patches.

        P 1 Reply Last reply Reply Quote 0
        • P
          pgs @fireodo
          last edited by

          @fireodo Yes, had that on the pfsense and the modem, which worked earlier. - Disabled VLAN 7 on the modem, but that did not bring any change. Still LCP: Down event / Link: DOWN event.

          P 1 Reply Last reply Reply Quote 0
          • P
            pgs @pgs
            last edited by

            Update: Rewieved my setup and remarked that the 7100 Switch 802.1Q VLAN 7 was not tagged on ETH2! So I changed that to be tagged and now I got a connect and an IP from my ISP. Heureka!

            But... I'm still offline...

            de14e379-5767-4fc0-8013-04d2b40816f7-grafik.png

            Have to figure out why that.

            Oh, and what is the explanation why VLAN 7 must not be set on the modem? Sounds not logical to me - but seems to work.

            P 1 Reply Last reply Reply Quote 0
            • P
              pgs @pgs
              last edited by pgs

              Next update: I'm NOT offline. It's just a gateway monitor problem. https://forum.netgate.com/topic/98151/2-3-gateway-monitor-not-working

              cd2cb5d8-25a0-4390-aac7-40b8e7315695-grafik.png

              So now it seems I'm fine! Thank you very much!

              If one has an explanation why VLAN on the modem must not be set, I'd be pleased.

              Regards, pgs

              fireodoF 1 Reply Last reply Reply Quote 0
              • fireodoF
                fireodo @pgs
                last edited by fireodo

                @pgs said in XG-7100: Can't get pppoe to work, any advice?:

                If one has an explanation why VLAN on the modem must not be set, I'd be pleased.

                I only know that Vlan7 has to be set in modem OR router - why its not working if its set on both I have no technical explanation - maybe the Deutsche Telekom can answer that ;-)

                Draytek Advice

                Kettop Mi4300YL CPU: i5-4300Y @ 1.60GHz RAM: 8GB Ethernet Ports: 4
                SSD: SanDisk pSSD-S2 16GB (ZFS) WiFi: WLE200NX
                pfsense 2.8.0 CE
                Packages: Apcupsd, Cron, Iftop, Iperf, LCDproc, Nmap, pfBlockerNG, RRD_Summary, Shellcmd, Snort, Speedtest, System_Patches.

                1 Reply Last reply Reply Quote 1
                • First post
                  Last post
                Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.