IPsec Export: Apple Profile tilt?
-
Hi, i just setup the IPSec very closed to the Recipes. link text
All updates are made, 22.05-RELEASE (amd64)
Export: IPsec Export: Apple Profile
Install on MacOS12.5.1
I finde the CA in my Keychain.
I klick on Connect, and immediately an error message appears
"A configuration error has occurred."
No more info. -
in the settings it seems like there is no CA selectet. And i can not select it by my self.
-
may my CA on the Mac is not in the korrect Place. Keychain allowes me not to move it to "System"
-
If i tray to select any CA it says: ```
You cannot authenticate using a certificate because your keychain does not contain any matching certificates. Use the Keychain Management program to import the appropriate certificates into your keychain. If you do not have the certificates required for authentication, contact your network administrator.
-
Working based on the official Netgate Docu
IPsec Remote Access VPN Example Using IKEv2 with EAP-MSCHAPv2
and the
"IPsec Export: Apple Profile" function from PFSense+
on a MacOS 12.5.1 Clientseems to me broken. Tilt. out of order.
-
I used the
IPsec Remote Access VPN Example Using IKEv1 with Pre-Shared Keysthis way the export worked.
That is strait forward, but definitely not what i won't.
-
Dead forum. no moderator. no knowledge. useless. too bad
-
@ralph-1 Have you tried adding the VPN connection by hand on the Mac?
I think the issue is with the profile including a self signed cert, at least it was with my iPhone.
Down load and trust the CA and the additional cert first then add the connection by hand.