SG-1100 boot stops waiting for input
-
Device: Netgate SG-1100
Software: 22.05-ReleaseMy SG-1100 booting process gets stuck waiting for the user to enter an option with no progress every time I restart the device or start it up after power loss.
A link to the image below shows at what stage the booting process stops.
I have to connect to the USB console port and press [Enter] to allow the booting process to continue.
I have this issue out of the box. Factory reset and upgrading to the recent software release did not solve the problem. It's frustrating to go and connect my laptop to the device via USB console port to make the booting process continue every time I restart the device and reboot after power loss.
Any advice is appreciated.
-
@naderbelaid I would reinstall from an image. Did you download the image from us recently or do an in-line upgrade?
If the latter please open a ticket at https://go.netgate.com/ and request the current release. You will need a backup of your config to restore after completing the re-imaging process.
-
@rcoleman-netgate it was an in-line upgrade. I'll try reinstalling from an image. and I'll post an update.
thanks a lot for your response
-
@rcoleman-netgate said in SG-1100 boot stops waiting for input:
@naderbelaid I would reinstall from an image. Did you download the image from us recently or do an in-line upgrade?
If the latter please open a ticket at https://go.netgate.com/ and request the current release. You will need a backup of your config to restore after completing the re-imaging process.
Reinstalling from an image solved the problem. Thank you very much