Do either SFP modules offered work with the 6100?
-
Like to the GPON module directly?
-
@stephenw10 Exactly.
-
Ah, that's fun! Yeah if you set it to 2.5G I would not expect the ix port to see it as that. It might just connect anyway but if it doesn't how would you reset it to 1G? Unless it has a hardware reset maybe?
-
@stephenw10 If it doesn't I have to put it into my Unifi switch. Unfortunately Amazon didn't deliver the 2.5G Ubiquiti module today so I have to wait until next week.
-
Hi
@mrsunfire Did you try Ubiquiti SFP+ on your 6100 ? does it work at 2.5G ?
I also have a 6100 and try to make my ONT at 2.5G but it doesn't work I can't force the speed on pfsense. I tried to force my ONT on mode hsgmii ( fw_setenv sgmii_mode 5 ) with no success
My ONT works well at 2.5G on my switch mikrotik but I'm stuck at 1G on pfense.
Really annoying that we can't force speed on SFP+ ports on netgate 6100
-
@florent-pascal No I didn't try. I'm back using my 2.5G RJ45 Modem provided by ISP for the moment.
-
@mrsunfire I was also able to get the Ubiquiti OM-MM-10G-D to work, I'm still setting up the 6100 to replace an 1100. I was able to verify that the FW is able to hot swap the modules with a ticket as the docs do not state either way. (https://docs.netgate.com/pfsense/en/latest/solutions/netgate-6100/io-ports.html#compatible-sfp-sfp-modules).
-
This post is deleted! -
@aszajlai - I have now been running this for two weeks with zero problems... Below are the stats, etc. Thank you everyone for this thread, now time for upgrading the other one that is no longer supported...
MTU:1500
Media: 10Gbase-SR <full-duplex,rxpause,txpause>
Plugged: SFP/SFP+/SFP28 10G Base-SR (LC)
Vendor:Ubiquiti Inc. PN: OM-MM-10G-D DATE: 2023-07-01
In/out packets: 22331704/27007819 (9.05 GiB/11.63 GiB)
In/out packets (pass): 22331704/27007819 (9.05 GiB/11.63 GiB)
In/out packets (block): 93141/0 (8.54 MiB/0 B)
In/out errors: 0/0
Collisions: 0
Interrupts: 44672451 (42/s)
