PfSense on Nokia IP130

[wolfgangh]

Hi all,
I'm a longtime user of m0n0wall, but now i like to switch to sfSense (need the enhancements :) )
The m0n0wall runs fine on a Nokia IP110 (since 5 years), and i have another IP130 were i like to install pfSense.
Unfortunately, the system won't boot. It stops immediately when it trys to mount the / partition
Looks like this:

…
hptrr: no controller detected.                                                 
ad0: 38154MB <fujitsu mhv2040as="" 00000096="">at ata0-master UDMA33               
Trying to mount root from ufs:/dev/da0s1a

Manual root filesystem specification:                                         
  <fstype>:<device>  Mount <device>using filesystem <fstype>                 
                      eg. ufs:da0s1a                                         
  ?                  List valid disk boot devices                             
  <empty line="">      Abort manual input
...

So i thinks i'm missing some modules/drivers for the controller? How to get or to build?
Or any other hints?
I tried the embedded and also the stand. kernel, same result everytime :(

Thanks for help,
Wolfgang</empty></fstype></device></device></fstype></fujitsu>

[wolfgangh]

:)
Found the mistake.

I installed the HDD with a USB2IDE adapter. And this is a SCSI emulation.
The Nokia only kows about IDE, so i had to change the da0… to ad0...

-WOlfgang