Navigation

    Netgate Discussion Forum
    • Register
    • Login
    • Search
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search

    Enabling Multiple Subnets to Communicate

    Routing and Multi WAN
    2
    2
    157
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • S
      S3v3nD34dly51ns last edited by

      First off apologies if this is not the right place to ask this and secondly if it has already been covered in a past forum post. However I am unable to find a definitive answer to a issue I am trying to resolve.
      My scenario thus far, I have my computer running on a hardwired subnet of 192.168.55.0/24, I have my APs running on a subnet of 10.0.20.0/24. The problem I am running into is in order for me to communicate with anything on the 10.0.20.0 subnet I have to enable the wireless on my PC before being able to communicate with anything on that subnet. How would I go about allowing the traffic to pass through both subnets?
      As I am new to the PFsense platform I apologize about such a benign and rookie question, any and all help in this would be very greatly appreciated. Any detailed steps would be a tremendous help. Thank you again.

      S 1 Reply Last reply Reply Quote 0
      • S
        SteveITS @S3v3nD34dly51ns last edited by

        @s3v3nd34dly51ns the LAN interface by default has an allow all rule. Other interfaces do not do default to deny all. What rules are on 192.168.55.0/24? Does the wireless device to which you’re trying to connect allow 192.168.55.0/24 in its firewall?

        Steve

        Only install packages for your version, or risk breaking it. If yours is older, select it in System/Update/Update Settings.
        When upgrading, let it finish; do not reboot early. Allow 10-15 minutes, or more depending on packages and device speed.

        1 Reply Last reply Reply Quote 0
        • First post
          Last post