Convert .crt to .pem TLS 1.3 helppp

Dobby_

@mcury said in Convert .crt to .pem TLS 1.3 helppp:

We are using Lets Encrypt certificates generated by Acme package in pfsense.
Freeradius 3.0.26 running in a Ubuntu server Jammy 22.04. LTS.

I would try out to set up samba and activate AD (active directory) and deploy all with GPOs or over a start script.

johnpoz

@mcury said in Convert .crt to .pem TLS 1.3 helppp:

But it would be better to get the certificate right..

The certificate has nothing to do with it.

mcury

@dobby_ said in Convert .crt to .pem TLS 1.3 helppp:

I would try out to set up samba and activate AD (active directory) and deploy all with GPOs or over a start script.

We are running samba-ad, users are member of the AD and freeradius is running unlang.
Only users that are member from wifi_users group can login.

mcury

@johnpoz said in Convert .crt to .pem TLS 1.3 helppp:

The certificate has nothing to do with it.

Hello johnpoz,
It works for everyone but not Windows 11 22H2 users and according to what I have been reading, the reason is the TLS 1.3 requirement..
I was able to convert it to .p12 for Plex, but not to .pem

johnpoz

@mcury said in Convert .crt to .pem TLS 1.3 helppp:

the reason is the TLS 1.3 requirement..

The cert has nothing to do with running tls 1.2 or 1.3.. you can run 1.1, 1.2 or 1.3 with the same cert.

Could have to do with cipher the client wants? You would have to look at the handshake to what is actually going wrong - the difficulty is that the tls part of the handshake is inside the encrypted eap tunnel.

johnpoz

@mcury said in Convert .crt to .pem TLS 1.3 helppp:

I was able to convert it to .p12 for Plex, but not to .pem

The certs you download from the cert manager would be pem, the format the cert is stored in is not the problem

mcury

@johnpoz said in Convert .crt to .pem TLS 1.3 helppp:

The certs you download from the cert manager would be pem, the format the cert is stored in is not the problem

hmm, I'll look into it, but as far as I know, freeradius requires a .pem file and Acme certificates are generated in .cer

For Plex, it was easy to convert to TLS 1.3

sudo openssl pkcs12 -export -out certificate.p12 -certpbe AES-256-CBC -keypbe AES-256-CBC -macalg SHA256 -inkey mykey.key -in mycert.cer

Now I'm trying to understand the syntax, if it is possible, to convert to .pem like that..

johnpoz

@mcury you can just rename them .cer, .crt .pem are all pem files..

Looking in my acme folder I see pem files

mcury

@johnpoz said in Convert .crt to .pem TLS 1.3 helppp:

you can just rename them .cer, .crt .pem are all pem files.

hm, I was doing like this:

openssl x509 -in mycert.cer -outform PEM -out mycert.pem
openssl x509 -in ca.cer -outform PEM -out ca.pem

Then, copy the .pem files along with the .key file to freeradius folder and restart the service.

It is a simple setup, EAP-TLS to freeradius, then samba use LDAP to check samba LDAP-groups.
Both are running in the same server.. freeradius just check 127.0.0.1:389 for groups, no need for LDAPS

It has been working flawless for a long time.. The problem began when users updated to Windows 11 22H2..

mcury

@johnpoz said in Convert .crt to .pem TLS 1.3 helppp:

Looking in my acme folder I see pem files

hmmm, weird.. these are the files I copied from /tmp folder in pfsense once the certs were generated:

~/certs$ ls -lah
total 44K
drwxr-xr-x 3 root root 4.0K Apr  5 20:09 .
drwxr-xr-x 8 pi   pi   4.0K May 19 21:23 ..
-rw-r--r-- 1 root root 3.7K Apr  5 20:07 ca.cer
-rw-r--r-- 1 root root 5.6K Apr  5 20:07 fullchain.cer
-rw-r--r-- 1 root root 1.9K Apr  5 20:07 mycert.cer
-rw-r--r-- 1 root root  826 Apr  5 20:07 mycert.conf
-rw-r--r-- 1 root root 1.1K Apr  5 20:07 mycert.csr
-rw-r--r-- 1 root root  220 Apr  5 20:07 mycert.csr.conf
-rw------- 1 root root 1.7K Apr  5 20:07 mykey.key

Edit:
Did you tick that option "Write Certificates" ?