crash FreeBSD 14.0-CURRENT #1 RELENG_2_7_0-n255866-686c8d3c1f0:

ccamarada

Hi

I have my Pf sense installed in a asus eepc.
Im starting the project after 2 weeks and is working .
Now im working, and the internet stop
i need to shutdown the equipment, and i have a crash in the dashboard.

I need help, to understand what is wrong.

thanks

info.0
textdump.tar.0

stephenw10

Backtrace:

db:0:kdb.enter.default>  bt
Tracing pid 800 tid 100160 td 0xfffffe006e129740
kdb_enter() at kdb_enter+0x32/frame 0xfffffe00a1459570
vpanic() at vpanic+0x183/frame 0xfffffe00a14595c0
panic() at panic+0x43/frame 0xfffffe00a1459620
trap_fatal() at trap_fatal+0x409/frame 0xfffffe00a1459680
trap_pfault() at trap_pfault+0x4f/frame 0xfffffe00a14596e0
calltrap() at calltrap+0x8/frame 0xfffffe00a14596e0
--- trap 0xc, rip = 0xffffffff80cd1c7d, rsp = 0xfffffe00a14597b0, rbp = 0xfffffe00a1459830 ---
__mtx_lock_sleep() at __mtx_lock_sleep+0xcd/frame 0xfffffe00a1459830
usbd_do_request_flags() at usbd_do_request_flags+0x732/frame 0xfffffe00a14598c0
usbd_do_request_proc() at usbd_do_request_proc+0x60/frame 0xfffffe00a1459920
ure_miibus_readreg() at ure_miibus_readreg+0x138/frame 0xfffffe00a1459990
rlphy_status() at rlphy_status+0x7b/frame 0xfffffe00a14599e0
rlphy_service() at rlphy_service+0x24/frame 0xfffffe00a1459a00
mii_pollstat() at mii_pollstat+0x56/frame 0xfffffe00a1459a30
ure_ifmedia_sts() at ure_ifmedia_sts+0x194/frame 0xfffffe00a1459a80
ifmedia_ioctl() at ifmedia_ioctl+0x16a/frame 0xfffffe00a1459ab0
ifhwioctl() at ifhwioctl+0x233/frame 0xfffffe00a1459bc0
ifioctl() at ifioctl+0x944/frame 0xfffffe00a1459cc0
kern_ioctl() at kern_ioctl+0x257/frame 0xfffffe00a1459d30
sys_ioctl() at sys_ioctl+0x12c/frame 0xfffffe00a1459e00
amd64_syscall() at amd64_syscall+0x109/frame 0xfffffe00a1459f30
fast_syscall_common() at fast_syscall_common+0xf8/frame 0xfffffe00a1459f30
--- syscall (54, FreeBSD ELF64, ioctl), rip = 0x2ec9e1f45f5a, rsp = 0x2ec9dc88c388, rbp = 0x2ec9dc88c430 ---

Panic:

<6>ue0: link state changed to DOWN
ugen0.3: <Realtek USB 10/100 LAN> at usbus0 (disconnected)
ure0: at uhub1, port 3, addr 4 (disconnected)
rlphy0: detached
miibus1: detached
ure0: detached


Fatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 02
fault virtual address	= 0x450
fault code		= supervisor read data, page not present
instruction pointer	= 0x20:0xffffffff80cd1c7d
stack pointer	        = 0x28:0xfffffe00a14597b0
frame pointer	        = 0x28:0xfffffe00a1459830
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 800 (devd)
rdi: fffff8006b8d92e0 rsi:                4 rdx:                0
rcx:     8ee84fb92670  r8: fffffe006e129c60  r9: fffffe00a145a000
rax:                0 rbx: fffffe006e129740 rbp: fffffe00a1459830
r10:                0 r11:         82250fd1 r12: fffffe00a14597d0
r13: fffff8006b8d92e0 r14:                0 r15:                0
trap number		= 12
panic: page fault
cpuid = 1
time = 1694800865
KDB: enter: panic

That is not good hardware choice. You have a Realtek NIC and a USB Realtek NIC.
It looks like it crashed when an assigned interface (ure0) was disconnected.

Steve

ccamarada

@stephenw10

Ok

Thanks a lot.

stephenw10

It would be better to use VLANs on the re(4) NIC for the interfaces than using a USB NIC if you can.