NUT Package (2.8.1 and above)

[dennypage]

@ghound said in NUT Package (2.8.1 and above):

I recently reloaded the driver, so I may have to wait a few days for the problem to show up. In the mean time this post is the problem I thought I was having (even though I have a Tripp Lite not a CyberPower, others reported your devel packaged helped Tripp Lite UPS):

From your Feb 22, 2023 post...

That post is long out of date. The particular issue discussed there was a USB library problem, which was addressed in the October 2023 release.

The recent TrippLite issues introduced in the January 2024 release are particular to the legacy TrippLite protocol (tripplite_usb). No association with HID UPSs (usbhid-ups).

[ghound]

@dennypage said in NUT Package (2.8.1 and above):

I don't know about this issue. What do you see in the logs for kernel USB and usbhid-ups?

When the unit disappears, does it still show up when you do

usbconfig -v
?

Is there a way to capture when the connection is dropped? The system log is quickly flooded with:

Mar 4 20:06:25	upsmon	54708	Poll UPS [TrippLite] failed - Driver not connected
Mar 4 20:06:20	upsmon	54708	Poll UPS [TrippLite] failed - Driver not connected
Mar 4 20:06:14	upsmon	54708	Poll UPS [TrippLite] failed - Driver not connected
Mar 4 20:06:09	upsmon	54708	Poll UPS [TrippLite] failed - Driver not connected
Mar 4 20:06:04	upsmon	54708	UPS TrippLite is unavailable
Mar 4 20:06:04	upsmon	54708	Poll UPS [TrippLite] failed - Driver not connected
Mar 4 20:05:59	upsmon	54708	Poll UPS [TrippLite] failed - Driver not connected
Mar 4 20:05:54	upsmon	54708	Poll UPS [TrippLite] failed - Driver not connected

The output of usbconfig -v is:

ugen0.1: <Generic XHCI root HUB> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA)
ugen0.1.0: uhub0: <Generic XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1>

  bLength = 0x0012
  bDescriptorType = 0x0001
  bcdUSB = 0x0300
  bDeviceClass = 0x0009  <HUB>
  bDeviceSubClass = 0x0000
  bDeviceProtocol = 0x0003
  bMaxPacketSize0 = 0x0009
  idVendor = 0x0000
  idProduct = 0x0000
  bcdDevice = 0x0100
  iManufacturer = 0x0001  <Generic>
  iProduct = 0x0002  <XHCI root HUB>
  iSerialNumber = 0x0000  <no string>
  bNumConfigurations = 0x0001


 Configuration index 0

    bLength = 0x0009
    bDescriptorType = 0x0002
    wTotalLength = 0x001f
    bNumInterfaces = 0x0001
    bConfigurationValue = 0x0001
    iConfiguration = 0x0000  <no string>
    bmAttributes = 0x0040
    bMaxPower = 0x0000

    Interface 0
      bLength = 0x0009
      bDescriptorType = 0x0004
      bInterfaceNumber = 0x0000
      bAlternateSetting = 0x0000
      bNumEndpoints = 0x0001
      bInterfaceClass = 0x0009  <HUB>
      bInterfaceSubClass = 0x0000
      bInterfaceProtocol = 0x0000
      iInterface = 0x0000  <no string>

     Endpoint 0
        bLength = 0x0007
        bDescriptorType = 0x0005
        bEndpointAddress = 0x0081  <IN>
        bmAttributes = 0x0003  <INTERRUPT>
        wMaxPacketSize = 0x0002
        bInterval = 0x00ff
        bRefresh = 0x0000
        bSynchAddress = 0x0000

      Additional Descriptor

      bLength = 0x06
      bDescriptorType = 0x30
      bDescriptorSubType = 0x00
       RAW dump:
       0x00 | 0x06, 0x30, 0x00, 0x00, 0x00, 0x00




ugen1.1: <Marvell EHCI root HUB> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)
ugen1.1.0: uhub1: <Marvell EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1>

  bLength = 0x0012
  bDescriptorType = 0x0001
  bcdUSB = 0x0200
  bDeviceClass = 0x0009  <HUB>
  bDeviceSubClass = 0x0000
  bDeviceProtocol = 0x0001
  bMaxPacketSize0 = 0x0040
  idVendor = 0x0000
  idProduct = 0x0000
  bcdDevice = 0x0100
  iManufacturer = 0x0001  <Marvell>
  iProduct = 0x0002  <EHCI root HUB>
  iSerialNumber = 0x0000  <no string>
  bNumConfigurations = 0x0001


 Configuration index 0

    bLength = 0x0009
    bDescriptorType = 0x0002
    wTotalLength = 0x0019
    bNumInterfaces = 0x0001
    bConfigurationValue = 0x0001
    iConfiguration = 0x0000  <no string>
    bmAttributes = 0x0040
    bMaxPower = 0x0000

    Interface 0
      bLength = 0x0009
      bDescriptorType = 0x0004
      bInterfaceNumber = 0x0000
      bAlternateSetting = 0x0000
      bNumEndpoints = 0x0001
      bInterfaceClass = 0x0009  <HUB>
      bInterfaceSubClass = 0x0000
      bInterfaceProtocol = 0x0000
      iInterface = 0x0000  <no string>

     Endpoint 0
        bLength = 0x0007
        bDescriptorType = 0x0005
        bEndpointAddress = 0x0081  <IN>
        bmAttributes = 0x0003  <INTERRUPT>
        wMaxPacketSize = 0x0008
        bInterval = 0x00ff
        bRefresh = 0x0000
        bSynchAddress = 0x0000



ugen1.2: <Tripp Lite ECO850LCD> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (100mA)

  bLength = 0x0012
  bDescriptorType = 0x0001
  bcdUSB = 0x0200
  bDeviceClass = 0x0000  <Probed by interface class>
  bDeviceSubClass = 0x0000
  bDeviceProtocol = 0x0000
  bMaxPacketSize0 = 0x0040
  idVendor = 0x09ae
  idProduct = 0x3024
  bcdDevice = 0x0002
  iManufacturer = 0x0003  <retrieving string failed>
  iProduct = 0x0001  <retrieving string failed>
  iSerialNumber = 0x0005  <retrieving string failed>
  bNumConfigurations = 0x0001


 Configuration index 0

    bLength = 0x0009
    bDescriptorType = 0x0002
    wTotalLength = 0x0022
    bNumInterfaces = 0x0001
    bConfigurationValue = 0x0001
    iConfiguration = 0x0000  <no string>
    bmAttributes = 0x00a0
    bMaxPower = 0x0032

    Interface 0
      bLength = 0x0009
      bDescriptorType = 0x0004
      bInterfaceNumber = 0x0000
      bAlternateSetting = 0x0000
      bNumEndpoints = 0x0001
      bInterfaceClass = 0x0003  <HID device>
      bInterfaceSubClass = 0x0000
      bInterfaceProtocol = 0x0000
      iInterface = 0x0000  <no string>

      Additional Descriptor

      bLength = 0x09
      bDescriptorType = 0x21
      bDescriptorSubType = 0x11
       RAW dump:
       0x00 | 0x09, 0x21, 0x11, 0x01, 0x21, 0x01, 0x22, 0x75,
       0x08 | 0x03

     Endpoint 0
        bLength = 0x0007
        bDescriptorType = 0x0005
        bEndpointAddress = 0x0081  <IN>
        bmAttributes = 0x0003  <INTERRUPT>
        wMaxPacketSize = 0x0040
        bInterval = 0x00ff
        bRefresh = 0x0000
        bSynchAddress = 0x0000

[ghound]

@ghound said in NUT Package (2.8.1 and above):

Is there a way to capture when the connection is dropped? The system log is quickly flooded with:

Mar 4 20:06:25 upsmon 54708 Poll UPS [TrippLite] failed - Driver not connected

I think I found the place in the system log when the connection was lost:

Mar  3 23:15:06 router01 upsd[53387]: Found 1 UPS defined in ups.conf
Mar  3 23:15:07 router01 upsd[53855]: Startup successful
Mar  3 23:15:07 router01 usbhid-ups[53729]: using 'battery.charge' to set battery low state
Mar  3 23:15:07 router01 usbhid-ups[53729]: using 'battery.runtime' to set battery low state
Mar  3 23:15:07 router01 usbhid-ups[54232]: Startup successful
Mar  3 23:15:08 router01 upsmon[54510]: Startup successful
Mar  3 23:15:08 router01 upsd[53855]: Connected to UPS [TrippLite]: usbhid-ups-TrippLite
Mar  3 23:15:08 router01 upsd[53855]: User local-monitor@::1 logged into UPS [TrippLite]
~ ~ ~
Mar  4 14:18:19 router01 usbhid-ups[54232]: libusb1: Could not open any HID devices: insufficient permissions on everything
Mar  4 14:18:19 router01 upsd[53855]: Data for UPS [TrippLite] is stale - check driver
Mar  4 14:18:19 router01 upsmon[54708]: Poll UPS [TrippLite] failed - Data stale
Mar  4 14:18:19 router01 upsmon[54708]: Communications with UPS TrippLite lost
Mar  4 14:18:21 router01 usbhid-ups[54232]: libusb1: Could not open any HID devices: insufficient permissions on everything
Mar  4 14:18:23 router01 usbhid-ups[54232]: libusb1: Could not open any HID devices: insufficient permissions on everything

[dennypage]

@ghound said in NUT Package (2.8.1 and above):

Is there a way to capture when the connection is dropped? The system log is quickly flooded with…

We only care about things that match “kernel” or “usbhid-ups”…

[ghound]

@dennypage said in NUT Package (2.8.1 and above):

We only care about things that match “kernel” or “usbhid-ups”…

Everything was working fine on March 3rd (after restart) but when I checked afternoon of March 4th, Nut reported: Failed to retrieve status.

(Of course there are many "usbhid-ups: Could not open any HID devices" entries between Mar 4 14:18 and Mar 4 15:03.)

Mar  3 23:15:00 router01 kernel: nd6_dad_timer: called with non-tentative address fe80:c::1:1(mvneta0.4092)
Mar  3 23:15:07 router01 usbhid-ups[53729]: using 'battery.charge' to set battery low state
Mar  3 23:15:07 router01 usbhid-ups[53729]: using 'battery.runtime' to set battery low state
Mar  3 23:15:07 router01 usbhid-ups[54232]: Startup successful
Mar  4 14:18:19 router01 usbhid-ups[54232]: libusb1: Could not open any HID devices: insufficient permissions on everything
Mar  4 14:18:21 router01 usbhid-ups[54232]: libusb1: Could not open any HID devices: insufficient permissions on everything
Mar  4 14:18:23 router01 usbhid-ups[54232]: libusb1: Could not open any HID devices: insufficient permissions on everything
  ~ ~ ~
Mar  4 15:03:26 router01 usbhid-ups[54232]: libusb1: Could not open any HID devices: insufficient permissions on everything
Mar  4 15:03:28 router01 usbhid-ups[54232]: libusb1: Could not open any HID devices: insufficient permissions on everything
Mar  4 15:03:28 router01 usbhid-ups[54232]: Failed to init libusb 1.0: Cannot allocate memory
Mar  4 15:03:28 router01 kernel: kern.ipc.maxpipekva exceeded; see tuning(7)

[dennypage]

@ghound If I understood you correctly, you had previously said that you had to physically disconnect the USB cable after the UPS disappeared. However the usbconfig output you posted shows that the UPS is still connected. Also, there are not kernel USB messages. Can you clarify please?

When the UPS stops, have you tried restarting the UPS service?

Lastly, can you please post anything you have in the "Extra Arguments to driver" and "Additional configuration lines for ups.conf" sections?

[ghound]

@dennypage said in NUT Package (2.8.1 and above):

@ghound If I understood you correctly, you had previously said that you had to physically disconnect the USB cable after the UPS disappeared. However the usbconfig output you posted shows that the UPS is still connected. Also, there are not kernel USB messages. Can you clarify please?

I had physically disconnected/reconnected the USB earlier that day and and restarted after I lost WAN ISP connection overnight. Here are log entries from that event:

Mar  3 06:39:12 router01 usbhid-ups[33081]: libusb1: Could not open any HID devices: insufficient permissions on everything
Mar  3 06:39:13 router01 usbhid-ups[33081]: Failed to init libusb 1.0: Cannot allocate memory
Mar  3 06:39:13 router01 kernel: kern.ipc.maxpipekva exceeded; see tuning(7)
 ~ ~ ~
Mar  3 09:57:34 router01 kernel: ---<<BOOT>>---
Mar  3 09:57:34 router01 kernel: GDB: debug ports: uart
Mar  3 09:57:34 router01 kernel: GDB: current port: uart
Mar  3 09:57:34 router01 kernel: KDB: debugger backends: ddb gdb
Mar  3 09:57:34 router01 kernel: KDB: current backend: ddb
Mar  3 09:57:34 router01 kernel: Copyright (c) 1992-2023 The FreeBSD Project.
Mar  3 09:57:34 router01 kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Mar  3 09:57:34 router01 kernel: 	The Regents of the University of California. All rights reserved.
Mar  3 09:57:34 router01 kernel: FreeBSD is a registered trademark of The FreeBSD Foundation.
Mar  3 09:57:34 router01 kernel: FreeBSD 14.0-CURRENT aarch64 1400094 #1 plus-RELENG_23_09_1-n256200-3de1e293f3a: Wed Dec  6 20:59:18 UTC 2023
Mar  3 09:57:34 router01 kernel:     root@freebsd:/var/jenkins/workspace/pfSense-Plus-snapshots-23_09_1-main/obj/aarch64/8ra4gn87/var/jenkins/workspace/pfSense-Plus-snapshots-23_09_1-main/sources/FreeBSD-src-plus-RELENG_23_09_1/arm64.aarch64/sys/pfSense arm64
Mar  3 09:57:34 router01 kernel: FreeBSD clang version 16.0.6 (https://github.com/llvm/llvm-project.git llvmorg-16.0.6-0-g7cbf1a259152)
Mar  3 09:57:34 router01 kernel: VT: init without driver.
Mar  3 09:57:34 router01 kernel: module scmi already present!
Mar  3 09:57:34 router01 kernel: real memory  = 1073680384 (1023 MB)
Mar  3 09:57:34 router01 kernel: avail memory = 983601152 (938 MB)
Mar  3 09:57:34 router01 kernel: Starting CPU 1 (1)
Mar  3 09:57:34 router01 kernel: FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
Mar  3 09:57:34 router01 kernel: arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
Mar  3 09:57:34 router01 kernel: random: entropy device external interface
Mar  3 09:57:34 router01 kernel: ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
Mar  3 09:57:34 router01 kernel: ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
Mar  3 09:57:34 router01 kernel: module_register_init: MOD_LOAD (ipw_bss_fw, 0xffff000000251810, 0) error 1
Mar  3 09:57:34 router01 kernel: ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
Mar  3 09:57:34 router01 kernel: ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
Mar  3 09:57:34 router01 kernel: module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffff0000002518bc, 0) error 1
Mar  3 09:57:34 router01 kernel: ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
Mar  3 09:57:34 router01 kernel: ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
Mar  3 09:57:34 router01 kernel: module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffff000000251968, 0) error 1
Mar  3 09:57:34 router01 kernel: iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
Mar  3 09:57:34 router01 kernel: iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
Mar  3 09:57:34 router01 kernel: module_register_init: MOD_LOAD (iwi_bss_fw, 0xffff000000251a14, 0) error 1
Mar  3 09:57:34 router01 kernel: iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
Mar  3 09:57:34 router01 kernel: iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
Mar  3 09:57:34 router01 kernel: module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffff000000251ac0, 0) error 1
Mar  3 09:57:34 router01 kernel: wlan: mac acl policy registered
Mar  3 09:57:34 router01 kernel: iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
Mar  3 09:57:34 router01 kernel: iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
Mar  3 09:57:34 router01 kernel: module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffff000000251b6c, 0) error 1
Mar  3 09:57:34 router01 kernel: kbd0 at kbdmux0
Mar  3 09:57:34 router01 kernel: ofwbus0: <Open Firmware Device Tree>
Mar  3 09:57:34 router01 kernel: simplebus0: <Flattened device tree simple bus> on ofwbus0
Mar  3 09:57:34 router01 kernel: simplebus1: <Flattened device tree simple bus> on simplebus0
Mar  3 09:57:34 router01 kernel: ofw_firmware0: <OFW Firmware Group> on ofwbus0
Mar  3 09:57:34 router01 kernel: simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0x13800-0x138ff,0x13c00-0x13c1f on simplebus1
Mar  3 09:57:34 router01 kernel: simple_mfd1: <Simple MFD (Multi-Functions Device)> mem 0x18800-0x188ff,0x18c00-0x18c1f on simplebus1
Mar  3 09:57:34 router01 kernel: psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
Mar  3 09:57:34 router01 kernel: netgate0: <Netgate 1100>
Mar  3 09:57:34 router01 kernel: gic0: <ARM Generic Interrupt Controller v3.0> mem 0x1d00000-0x1d0ffff,0x1d40000-0x1d7ffff,0x1d80000-0x1d81fff,0x1d90000-0x1d91fff,0x1da0000-0x1dbffff irq 28 on simplebus1
Mar  3 09:57:34 router01 kernel: gpio0: <Armada 37x0 North Bridge GPIO Controller> mem 0x13800-0x138ff,0x13c00-0x13c1f irq 29,30,31,32,33,34,35,36,37,38,39,40 on simple_mfd0
Mar  3 09:57:34 router01 kernel: gpiobus0: <OFW GPIO bus> on gpio0
Mar  3 09:57:34 router01 kernel: gpio1: <Armada 37x0 South Bridge GPIO Controller> mem 0x18800-0x188ff,0x18c00-0x18c1f irq 41,42,43,44,45 on simple_mfd1
Mar  3 09:57:34 router01 kernel: gpiobus1: <OFW GPIO bus> on gpio1
Mar  3 09:57:34 router01 kernel: gpioregulator0: <GPIO controlled regulator> on ofwbus0
Mar  3 09:57:34 router01 kernel: a37x0-xtal0: <Marvell Armada 3700 Oscillator> mem 0x13800-0x138ff,0x13c00-0x13c1f on simple_mfd0
Mar  3 09:57:34 router01 kernel: generic_timer0: <ARMv8 Generic Timer> irq 0,1,2,3 on ofwbus0
Mar  3 09:57:34 router01 kernel: Timecounter "ARM MPCore Timecounter" frequency 12500000 Hz quality 1000
Mar  3 09:57:34 router01 kernel: Event timer "ARM MPCore Eventtimer" frequency 12500000 Hz quality 1000
Mar  3 09:57:34 router01 kernel: a37x0_tbg0: <Marvell Armada 3700 time base generators> mem 0x13200-0x132ff on simplebus1
Mar  3 09:57:34 router01 kernel: a37x0_nb_periph_driver0: <marvell,armada-3700-nb-periph-clock> mem 0x13000-0x130ff on simplebus1
Mar  3 09:57:34 router01 kernel: a37x0_sb_periph_driver0: <marvell,armada-3700-sb-periph-clock> mem 0x18000-0x180ff on simplebus1
Mar  3 09:57:34 router01 kernel: cpulist0: <Open Firmware CPU Group> on ofwbus0
Mar  3 09:57:34 router01 kernel: cpu0: <Open Firmware CPU> on cpulist0
Mar  3 09:57:34 router01 kernel: pmu0: <Performance Monitoring Unit> irq 4 on ofwbus0
Mar  3 09:57:34 router01 kernel: spi0: <Armada 37x0 SPI controller> mem 0x10600-0x10fff irq 6 on simplebus1
Mar  3 09:57:34 router01 kernel: iichb0: <Marvell Armada 37x0 IIC controller> mem 0x11000-0x11023 irq 7 on simplebus1
Mar  3 09:57:34 router01 kernel: iicbus0: <OFW I2C bus> on iichb0
Mar  3 09:57:34 router01 kernel: iic0: <I2C generic I/O> on iicbus0
Mar  3 09:57:34 router01 kernel: uart0: <Marvell Armada 3700 UART> mem 0x12000-0x12017 irq 9,10,11 on simplebus1
Mar  3 09:57:34 router01 kernel: uart0: console (115200,n,8,1)
Mar  3 09:57:34 router01 kernel: gpioc0: <GPIO controller> on gpio0
Mar  3 09:57:34 router01 kernel: gpioc1: <GPIO controller> on gpio1
Mar  3 09:57:34 router01 kernel: mvneta0: <NETA controller> mem 0x30000-0x33fff irq 14 on simplebus1
Mar  3 09:57:34 router01 kernel: mvneta0: version is 10
Mar  3 09:57:34 router01 kernel: mdio0: <MDIO> on mvneta0
Mar  3 09:57:34 router01 kernel: mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0
Mar  3 09:57:34 router01 kernel: e6000sw0: <Marvell 88E6341> on mdio0
Mar  3 09:57:34 router01 kernel: e6000sw0: multi-chip addressing mode (0x1)
Mar  3 09:57:34 router01 kernel: e6000sw0: CPU port at 0
Mar  3 09:57:34 router01 kernel: e6000sw0: fixed port at 0
Mar  3 09:57:34 router01 kernel: e6000sw0: PHY at port 1
Mar  3 09:57:34 router01 kernel: miibus0: <MII bus> on e6000sw0
Mar  3 09:57:34 router01 kernel: e1000phy0: <Marvell 88E1000 Gigabit PHY> PHY 17 on miibus0
Mar  3 09:57:34 router01 kernel: e1000phy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
Mar  3 09:57:34 router01 kernel: e6000sw0: PHY at port 2
Mar  3 09:57:34 router01 kernel: miibus1: <MII bus> on e6000sw0
Mar  3 09:57:34 router01 kernel: e1000phy1: <Marvell 88E1000 Gigabit PHY> PHY 18 on miibus1
Mar  3 09:57:34 router01 kernel: e1000phy1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
Mar  3 09:57:34 router01 kernel: e6000sw0: PHY at port 3
Mar  3 09:57:34 router01 kernel: miibus2: <MII bus> on e6000sw0
Mar  3 09:57:34 router01 kernel: e1000phy2: <Marvell 88E1000 Gigabit PHY> PHY 19 on miibus2
Mar  3 09:57:34 router01 kernel: e1000phy2:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
Mar  3 09:57:34 router01 kernel: e6000sw0: switch is ready.
Mar  3 09:57:34 router01 kernel: etherswitch0: <Switch controller> on e6000sw0
Mar  3 09:57:34 router01 kernel: mvneta0: Ethernet address: f0:ad:4e:1b:e5:a6
Mar  3 09:57:34 router01 kernel: xhci0: <Generic USB 3.0 controller> mem 0x58000-0x5bfff irq 16 on simplebus1
Mar  3 09:57:34 router01 kernel: xhci0: 32 bytes context size, 32-bit DMA
Mar  3 09:57:34 router01 kernel: usbus0 on xhci0
Mar  3 09:57:34 router01 kernel: ehci0: <Marvell Integrated USB 2.0 controller> mem 0x5e000-0x5efff irq 17 on simplebus1
Mar  3 09:57:34 router01 kernel: usbus1: EHCI version 1.0
Mar  3 09:57:34 router01 kernel: usbus1 on ehci0
Mar  3 09:57:34 router01 kernel: sdhci_xenon0: <Armada Xenon SDHCI controller> mem 0xd0000-0xd02ff,0x1e808-0x1e80b irq 25 on simplebus1
Mar  3 09:57:34 router01 kernel: sdhci_xenon1: <Armada Xenon SDHCI controller> mem 0xd8000-0xd82ff,0x17808-0x1780b irq 26 on simplebus1
Mar  3 09:57:34 router01 kernel: mmc0: <MMC/SD bus> on sdhci_xenon1
Mar  3 09:57:34 router01 kernel: ahci0: <AHCI SATA controller> mem 0xe0000-0xe0177 irq 27 on simplebus1
Mar  3 09:57:34 router01 kernel: ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported with FBS
Mar  3 09:57:34 router01 kernel: ahcich0: <AHCI channel> at channel 0 on ahci0
Mar  3 09:57:34 router01 kernel: device_attach: ahcich0 attach returned 6
Mar  3 09:57:34 router01 kernel: pcib0: <Marvell Armada 3700 PCIe Bus Controller> mem 0xd0070000-0xd008ffff irq 5 on simplebus0
Mar  3 09:57:34 router01 kernel: pcib0: link never came up
Mar  3 09:57:34 router01 kernel: pci0: <OFW PCI bus> on pcib0
Mar  3 09:57:34 router01 kernel: gpioled0: <GPIO LEDs> on ofwbus0
Mar  3 09:57:34 router01 kernel: armv8crypto0: <AES-CBC,AES-XTS,AES-GCM>
Mar  3 09:57:34 router01 kernel: Timecounters tick every 1.000 msec
Mar  3 09:57:34 router01 kernel: mvneta0: link state changed to UP
Mar  3 09:57:34 router01 kernel: spibus0: <OFW SPI bus> on spi0
Mar  3 09:57:34 router01 kernel: mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0
Mar  3 09:57:34 router01 kernel: mx25l0: device type mx25u3235f, size 4096K in 64 sectors of 64K, erase size 4K
Mar  3 09:57:34 router01 kernel: usbus0: 5.0Gbps Super Speed USB v3.0
Mar  3 09:57:34 router01 kernel: usbus1: 480Mbps High Speed USB v2.0
Mar  3 09:57:34 router01 kernel: ugen0.1: <Generic XHCI root HUB> at usbus0
Mar  3 09:57:34 router01 kernel: uhub0 on usbus0
Mar  3 09:57:34 router01 kernel: uhub0: <Generic XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
Mar  3 09:57:34 router01 kernel: ugen1.1: <Marvell EHCI root HUB> at usbus1
Mar  3 09:57:34 router01 kernel: uhub1 on usbus1
Mar  3 09:57:34 router01 kernel: uhub1: <Marvell EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
Mar  3 09:57:34 router01 kernel: mmc0: Failed to set VCCQ for card at relative address 2
Mar  3 09:57:34 router01 kernel: mmcsd0: 8GB <MMCHC DG4008 0.1 SN 223D1804 MFG 03/2018 by 69 0x0000> at mmc0 50.0MHz/8bit/65535-block
Mar  3 09:57:34 router01 kernel: mmcsd0boot0: 4MB partition 1 at mmcsd0
Mar  3 09:57:34 router01 kernel: mmcsd0boot1: 4MB partition 2 at mmcsd0
Mar  3 09:57:34 router01 kernel: mmcsd0rpmb: 4MB partition 3 at mmcsd0
Mar  3 09:57:34 router01 kernel: CPU  0: ARM Cortex-A53 r0p4 affinity:  0
Mar  3 09:57:34 router01 kernel:                    Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
Mar  3 09:57:34 router01 kernel:  Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL>
Mar  3 09:57:34 router01 kernel:  Instruction Set Attributes 1 = <>
Mar  3 09:57:34 router01 kernel:  Instruction Set Attributes 2 = <>
Mar  3 09:57:34 router01 kernel:          Processor Features 0 = <GIC,AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
Mar  3 09:57:34 router01 kernel:          Processor Features 1 = <>
Mar  3 09:57:34 router01 kernel:       Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA>
Mar  3 09:57:34 router01 kernel:       Memory Model Features 1 = <8bit VMID>
Mar  3 09:57:34 router01 kernel:       Memory Model Features 2 = <32bit CCIDX,48bit VA>
Mar  3 09:57:34 router01 kernel:              Debug Features 0 = <DoubleLock,2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
Mar  3 09:57:34 router01 kernel:              Debug Features 1 = <>
Mar  3 09:57:34 router01 kernel:          Auxiliary Features 0 = <>
Mar  3 09:57:34 router01 kernel:          Auxiliary Features 1 = <>
Mar  3 09:57:34 router01 kernel: AArch32 Instruction Set Attributes 5 = <CRC32,SHA2,SHA1,AES+VMULL,SEVL>
Mar  3 09:57:34 router01 kernel: AArch32 Media and VFP Features 0 = <FPRound,FPSqrt,FPDivide,DP VFPv3+v4,SP VFPv3+v4,AdvSIMD>
Mar  3 09:57:34 router01 kernel: AArch32 Media and VFP Features 1 = <SIMDFMAC,FPHP DP Conv,SIMDHP SP Conv,SIMDSP,SIMDInt,SIMDLS,FPDNaN,FPFtZ>
Mar  3 09:57:34 router01 kernel: CPU  1: ARM Cortex-A53 r0p4 affinity:  1
Mar  3 09:57:34 router01 kernel: Release APs...done
Mar  3 09:57:34 router01 kernel: TCP_ratelimit: Is now initialized
Mar  3 09:57:34 router01 kernel: Trying to mount root from ufs:/dev/diskid/DISK-223D1804s3 [rw,noatime]...
Mar  3 09:57:34 router01 kernel: uhub0: 2 ports with 2 removable, self powered
Mar  3 09:57:34 router01 kernel: Warning: no time-of-day clock registered, system time will not be set accurately
Mar  3 09:57:34 router01 kernel: Dual Console: Serial Primary, Video Secondary
Mar  3 09:57:34 router01 kernel: uhub1: 1 port with 1 removable, self powered
Mar  3 09:57:34 router01 kernel: e6000sw0port1: link state changed to DOWN
Mar  3 09:57:34 router01 kernel: e6000sw0port2: link state changed to DOWN
Mar  3 09:57:34 router01 kernel: e6000sw0port3: link state changed to DOWN
Mar  3 09:57:34 router01 kernel: ugen1.2: <Tripp Lite ECO850LCD> at usbus1
Mar  3 09:57:34 router01 kernel: uhid0 on uhub1
Mar  3 09:57:34 router01 kernel: uhid0: <Tripp Lite ECO850LCD, class 0/0, rev 2.00/0.02, addr 2> on usbus1
Mar  3 09:57:34 router01 kernel: e6000sw0port3: link state changed to UP
Mar  3 09:57:34 router01 kernel: random: unblocking device.
Mar  3 09:57:34 router01 kernel: safexcel0: <SafeXcel EIP-97 crypto accelerator> mem 0x90000-0xaffff irq 18,19,20,21,22,23 on simplebus1
Mar  3 09:57:34 router01 kernel: lo0: link state changed to UP
Mar  3 09:57:34 router01 kernel: e6000sw0port3: link state changed to DOWN
Mar  3 09:57:34 router01 kernel: vlan0: changing name to 'mvneta0.4090'
Mar  3 09:57:37 router01 kernel: e6000sw0port1: link state changed to UP
Mar  3 09:57:37 router01 kernel: e6000sw0port3: link state changed to UP
Mar  3 09:57:42 router01 kernel: vlan1: changing name to 'mvneta0.4091'
Mar  3 09:57:42 router01 kernel: vlan2: changing name to 'mvneta0.4092'
Mar  3 09:57:42 router01 kernel: vlan3: changing name to 'mvneta0.30'
Mar  3 09:57:43 router01 kernel: vlan4: changing name to 'mvneta0.40'
Mar  3 09:57:43 router01 kernel: [fib_algo] inet.0 (bsearch4#27) rebuild_fd_flm: switching algo to radix4_lockless
Mar  3 09:57:43 router01 kernel: vlan5: changing name to 'mvneta0.50'
Mar  3 09:57:44 router01 kernel: done.
Mar  3 09:57:44 router01 kernel: done.
Mar  3 09:57:45 router01 kernel: done.
Mar  3 09:57:45 router01 kernel: done.
Mar  3 09:57:45 router01 kernel: pflog0: promiscuous mode enabled
Mar  3 09:57:48 router01 kernel: .
Mar  3 09:57:48 router01 kernel: done.
Mar  3 09:57:48 router01 kernel: done.
Mar  3 09:57:49 router01 kernel: done.
Mar  3 09:57:51 router01 kernel: done.
Mar  3 09:57:52 router01 kernel: done.
Mar  3 09:58:33 router01 kernel: done.
Mar  3 09:58:33 router01 kernel: done.
Mar  3 09:58:34 router01 kernel: done.
Mar  3 09:58:35 router01 kernel: done.
Mar  3 09:58:36 router01 kernel: ....
Mar  3 09:58:39 router01 kernel: .
Mar  3 09:58:39 router01 kernel: done.
Mar  3 09:58:44 router01 kernel: done.
Mar  3 09:58:46 router01 kernel: done.
Mar  3 09:58:46 router01 kernel: done.
Mar  3 09:58:50 router01 usbhid-ups[79600]: using 'battery.charge' to set battery low state
Mar  3 09:58:50 router01 kernel: uhid0: at uhub1, port 1, addr 2 (disconnected)
Mar  3 09:58:50 router01 kernel: uhid0: detached
Mar  3 09:58:50 router01 usbhid-ups[79600]: using 'battery.runtime' to set battery low state
Mar  3 09:58:50 router01 usbhid-ups[80230]: Startup successful
Mar  3 09:58:54 router01 usbhid-ups[86506]: using 'battery.charge' to set battery low state
Mar  3 09:58:54 router01 usbhid-ups[86506]: using 'battery.runtime' to set battery low state
Mar  3 09:58:54 router01 usbhid-ups[92987]: Startup successful

When the UPS stops, have you tried restarting the UPS service?

Yes, restarting the service alone is unsuccessful. I stop the service, disconnect/reconnect the UPS USB, restart the service - that procedure is successful.

Lastly, can you please post anything you have in the "Extra Arguments to driver" and "Additional configuration lines for ups.conf" sections?

Only using "Extra Arguments to driver":

ignorelb
override.battery.charge.low = 20
override.battery.runtime.low = 61

[ghound]

@dennypage said in NUT Package (2.8.1 and above):

@ghound If I understood you correctly, you had previously said that you had to physically disconnect the USB cable after the UPS disappeared. However the usbconfig output you posted shows that the UPS is still connected. Also, there are not kernel USB messages. Can you clarify please?

When the UPS stops, have you tried restarting the UPS service?

Lastly, can you please post anything you have in the "Extra Arguments to driver" and "Additional configuration lines for ups.conf" sections?

This is a clean log of being in the failed condition, trying service restart - still in failed condition, stop-nut/disconnect/reconnect/start-nut - connection restored sequence:

 ~ ~ ~ Nut Service Restart ~ ~ ~
Mar  5 15:06:16 router01 upsmon[54708]: Poll UPS [TrippLite] failed - Driver not connected
Mar  5 15:06:19 router01 upsmon[54708]: Signal 15: exiting
Mar  5 15:06:19 router01 upsd[53855]: User local-monitor@::1 logged out from UPS [TrippLite]
Mar  5 15:06:19 router01 upsd[53855]: mainloop: Interrupted system call
Mar  5 15:06:19 router01 upsd[53855]: Signal 15: exiting
Mar  5 15:06:19 router01 upsd[54022]: listening on 127.0.0.1 port 3493
Mar  5 15:06:19 router01 upsd[54022]: listening on ::1 port 3493
Mar  5 15:06:19 router01 upsd[54022]: Can't connect to UPS [TrippLite] (usbhid-ups-TrippLite): No such file or directory
Mar  5 15:06:19 router01 upsd[54022]: Found 1 UPS defined in ups.conf
Mar  5 15:06:19 router01 upsd[54239]: Startup successful
Mar  5 15:06:20 router01 upsmon[54725]: Startup successful
Mar  5 15:06:20 router01 upsd[54239]: User local-monitor@::1 logged into UPS [TrippLite]
Mar  5 15:06:20 router01 upsmon[55048]: Poll UPS [TrippLite] failed - Driver not connected
Mar  5 15:06:20 router01 upsmon[55048]: Communications with UPS TrippLite lost
Mar  5 15:06:25 router01 upsmon[55048]: Poll UPS [TrippLite] failed - Driver not connected
Mar  5 15:06:25 router01 upsmon[55048]: UPS TrippLite is unavailable
Mar  5 15:06:30 router01 upsmon[55048]: Poll UPS [TrippLite] failed - Driver not connected
Mar  5 15:08:05 router01 upsmon[55048]: Poll UPS [TrippLite] failed - Driver not connected
 ~ ~ ~ Nut Service Stoped / USB disconnect-reconnect/Nut Service Started ~ ~ ~
Mar  5 15:08:08 router01 upsmon[55048]: Signal 15: exiting
Mar  5 15:08:08 router01 upsd[54239]: User local-monitor@::1 logged out from UPS [TrippLite]
Mar  5 15:08:08 router01 upsd[54239]: mainloop: Interrupted system call
Mar  5 15:08:08 router01 upsd[54239]: Signal 15: exiting
Mar  5 15:08:30 router01 kernel: ugen1.2: <Tripp Lite ECO850LCD> at usbus1 (disconnected)
Mar  5 15:08:44 router01 kernel: ugen1.2: <Tripp Lite ECO850LCD> at usbus1
Mar  5 15:08:44 router01 kernel: uhid0 on uhub1
Mar  5 15:08:44 router01 kernel: uhid0: <Tripp Lite ECO850LCD, class 0/0, rev 2.00/0.02, addr 2> on usbus1
Mar  5 15:09:04 router01 upsd[98800]: listening on 127.0.0.1 port 3493
Mar  5 15:09:04 router01 upsd[98800]: listening on ::1 port 3493
Mar  5 15:09:04 router01 upsd[98800]: Can't connect to UPS [TrippLite] (usbhid-ups-TrippLite): No such file or directory
Mar  5 15:09:04 router01 upsd[98800]: Found 1 UPS defined in ups.conf
Mar  5 15:09:04 router01 upsd[643]: Startup successful
Mar  5 15:09:05 router01 usbhid-ups[99491]: using 'battery.charge' to set battery low state
Mar  5 15:09:05 router01 kernel: uhid0: at uhub1, port 1, addr 2 (disconnected)
Mar  5 15:09:05 router01 kernel: uhid0: detached
Mar  5 15:09:05 router01 usbhid-ups[99491]: using 'battery.runtime' to set battery low state
Mar  5 15:09:05 router01 usbhid-ups[962]: Startup successful
Mar  5 15:09:05 router01 upsmon[2297]: Startup successful
Mar  5 15:09:05 router01 upsd[643]: Connected to UPS [TrippLite]: usbhid-ups-TrippLite
Mar  5 15:09:05 router01 upsd[643]: User local-monitor@::1 logged into UPS [TrippLite]

[dennypage]

@ghound I don't see any error entries from usbhid-ups suggesting a reason for exit.

Can you run the driver by hand in debug mode via ssh please?

First start the service, and then kill the driver:

killall usbhid-ups

Then, run the driver with debug:

/usr/local/libexec/nut/usbhid-ups -DDDDDD -a TrippLite

And post the output. This may be lengthy, so it's okay to eliminate duplicated line in the middle.

[ghound]

@dennypage said in NUT Package (2.8.1 and above):

Can you run the driver by hand in debug mode via ssh please?

First start the service, and then kill the driver:

killall usbhid-ups
Then, run the driver with debug:

/usr/local/libexec/nut/usbhid-ups -DDDDDD -a TrippLite
And post the output. This may be lengthy, so it's okay to eliminate duplicated line in the middle.

I have the driver running by hand as requested. Output is to the console, should I redirect it to a file or will I be able to capture what you are looking for from console scrollback? Here is one frame of output while the driver seems to be running successfully.

 524.757599	[D5] send_to_all: SETINFO driver.state "updateinfo"
 524.757772	[D6] send_to_all: write 34 bytes to socket 9 succeeded (ret=34): SETINFO driver.state "updateinfo"

 524.757789	[D1] upsdrv_updateinfo...
 524.782403	[D2] file_report_buffer: expected 4 bytes, but got 512 instead
 524.782484	[D3] Report[err]: (512 bytes) => 32 00 00 09 00 00 00 00 f0 9f 6a 80 00 00 00 00
 524.782515	[D3]  00 00 00 00 00 00 00 00 98 ea f4 45 48 49 3a c1 80 a0 6a 80 ff ff ff ff 40
 524.782544	[D3]  9e 6a 80 00 00 00 00 14 b1 b6 83 00 00 00 00 26 06 ee 65 00 00 00 00 00 50
 524.782574	[D3]  27 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60 27 00 00 00 00 00 02 00 00
 524.782603	[D3]  00 00 00 00 00 00 60 27 00 00 00 00 00 41 3c 21 00 00 00 00 00 5c 8d 20 00
 524.782632	[D3]  00 00 00 00 78 9f 6a 80 00 00 00 00 00 02 00 00 00 00 00 00 f0 a1 6a 80 00
 524.782661	[D3]  00 00 00 30 9f 6a 80 00 00 00 00 f0 9e 6a 80 00 00 00 00 d8 ff ff ff 80 ff
 524.782689	[D3]  ff ff 3f 9f 6a 80 00 00 00 00 b8 c3 c2 83 00 00 00 00 9a 9f 6a 80 00 00 00
 524.782719	[D3]  00 00 00 00 00 dd 01 00 00 08 02 ff ff 00 00 00 00 78 9f 6a 80 00 00 00 00
 524.782748	[D3]  ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 524.782777	[D3]  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 524.782806	[D3]  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 524.782835	[D3]  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 524.782863	[D3]  4d 19 bd 83 98 ea f4 45 48 49 3a c1 00 9e 6a 80 00 00 00 00 cc 63 b7 83 00
 524.782893	[D3]  00 00 00 00 00 00 00 00 00 00 00 00 60 27 00 00 00 00 00 02 00 00 00 00 00
 524.782922	[D3]  00 00 00 70 27 00 00 00 00 00 41 3c 21 00 00 00 00 00 0d 00 00 00 00 00 00
 524.782951	[D3]  00 0d 00 00 00 00 00 00 00 68 9e 6a 80 00 00 00 00 26 06 ee 65 00 00 00 00
 524.782979	[D3]  2d ee 9c 21 5f d5 5e 68 00 00 00 00 00 00 00 00 98 ea f4 45 48 49 3a c1 30
 524.783008	[D3]  9e 6a 80 00 00 00 00 9c 5f b7 83 00 00 00 00 0d 00 00 00 00 00 00 00 00 00
 524.783037	[D3]  00 00 00 00 00 00 68 9e 6a 80 00 00 00 00 a0 9e 6a 80 00 00 00 00 80 9e 6a
 524.783063	[D3]  80 00 00 00 00 8c 61 b0 83 00 00 00 00 5c 8d 20 00 00 00 00 00
 524.783737	[D1] Got 9 HID objects...
 524.783796	[D3] Report[buf]: (4 bytes) => 32 00 00 09
 524.783812	[D5] PhyMax = 0, PhyMin = 0, LogMax = 1, LogMin = 0
 524.783826	[D5] Unit = 00000000, UnitExp = 0
 524.783838	[D5] Exponent = 0
 524.783854	[D5] hid_lookup_path: 00840004 -> UPS
 524.783870	[D5] hid_lookup_path: 00840024 -> PowerSummary
 524.783884	[D5] hid_lookup_path: 00840002 -> PresentStatus
 524.783898	[D5] hid_lookup_path: 00840062 -> InternalFailure
 524.783915	[D2] Path: UPS.PowerSummary.PresentStatus.InternalFailure, Type: Input, ReportID: 0x32, Offset: 7, Size: 1, Value: 0
 524.784119	[D5] hu_find_infoval: found !commfault (value: 0)
 524.784149	[D5] process_boolean_info: !commfault
 524.784179	[D3] Report[buf]: (4 bytes) => 32 00 00 09
 524.784195	[D5] PhyMax = 0, PhyMin = 0, LogMax = 1, LogMin = 0
 524.784207	[D5] Unit = 00000000, UnitExp = 0
 524.784219	[D5] Exponent = 0
 524.784233	[D5] hid_lookup_path: 00840004 -> UPS
 524.784247	[D5] hid_lookup_path: 00840024 -> PowerSummary
 524.784261	[D5] hid_lookup_path: 00840002 -> PresentStatus
 524.784275	[D5] hid_lookup_path: 00840069 -> ShutdownImminent
 524.784291	[D2] Path: UPS.PowerSummary.PresentStatus.ShutdownImminent, Type: Input, ReportID: 0x32, Offset: 9, Size: 1, Value: 0
 524.784307	[D5] hu_find_infoval: found !shutdownimm (value: 0)
 524.784336	[D5] process_boolean_info: !shutdownimm
 524.784357	[D3] Report[buf]: (4 bytes) => 32 00 00 09
 524.784371	[D5] PhyMax = 0, PhyMin = 0, LogMax = 1, LogMin = 0
 524.784383	[D5] Unit = 00000000, UnitExp = 0
 524.784394	[D5] Exponent = 0
 524.784407	[D5] hid_lookup_path: 00840004 -> UPS
 524.784421	[D5] hid_lookup_path: 00840024 -> PowerSummary
 524.784434	[D5] hid_lookup_path: 00840002 -> PresentStatus
 524.784449	[D5] hid_lookup_path: 008500d0 -> ACPresent
 524.784465	[D2] Path: UPS.PowerSummary.PresentStatus.ACPresent, Type: Input, ReportID: 0x32, Offset: 16, Size: 1, Value: 1
 524.785177	[D5] hu_find_infoval: found online (value: 1)
 524.785224	[D5] process_boolean_info: online
 524.785252	[D3] Report[buf]: (4 bytes) => 32 00 00 09
 524.785268	[D5] PhyMax = 0, PhyMin = 0, LogMax = 1, LogMin = 0
 524.785282	[D5] Unit = 00000000, UnitExp = 0
 524.785294	[D5] Exponent = 0
 524.785309	[D5] hid_lookup_path: 00840004 -> UPS
 524.785335	[D5] hid_lookup_path: 00840024 -> PowerSummary
 524.785350	[D5] hid_lookup_path: 00840002 -> PresentStatus
 524.785365	[D5] hid_lookup_path: 00850042 -> BelowRemainingCapacityLimit
 524.785381	[D2] Path: UPS.PowerSummary.PresentStatus.BelowRemainingCapacityLimit, Type: Input, ReportID: 0x32, Offset: 18, Size: 1, Value: 0
 524.785399	[D5] hu_find_infoval: found !lowbatt (value: 0)
 524.785412	[D5] process_boolean_info: !lowbatt
 524.785433	[D3] Report[buf]: (4 bytes) => 32 00 00 09
 524.785446	[D5] PhyMax = 0, PhyMin = 0, LogMax = 1, LogMin = 0
 524.785459	[D5] Unit = 00000000, UnitExp = 0
 524.785470	[D5] Exponent = 0
 524.785482	[D5] hid_lookup_path: 00840004 -> UPS
 524.785496	[D5] hid_lookup_path: 00840024 -> PowerSummary
 524.785509	[D5] hid_lookup_path: 00840002 -> PresentStatus
 524.785524	[D5] hid_lookup_path: 00850046 -> FullyCharged
 524.785539	[D2] Path: UPS.PowerSummary.PresentStatus.FullyCharged, Type: Input, ReportID: 0x32, Offset: 19, Size: 1, Value: 1
 524.785556	[D5] hu_find_infoval: found fullycharged (value: 1)
 524.785568	[D5] process_boolean_info: fullycharged
 524.785591	[D3] Report[buf]: (4 bytes) => 32 00 00 09
 524.785604	[D5] PhyMax = 0, PhyMin = 0, LogMax = 1, LogMin = 0
 524.785616	[D5] Unit = 00000000, UnitExp = 0
 524.785627	[D5] Exponent = 0
 524.785640	[D5] hid_lookup_path: 00840004 -> UPS
 524.785653	[D5] hid_lookup_path: 00840024 -> PowerSummary
 524.785666	[D5] hid_lookup_path: 00840002 -> PresentStatus
 524.785681	[D5] hid_lookup_path: 00850044 -> Charging
 524.785695	[D2] Path: UPS.PowerSummary.PresentStatus.Charging, Type: Input, ReportID: 0x32, Offset: 20, Size: 1, Value: 0
 524.785711	[D5] hu_find_infoval: found !chrg (value: 0)
 524.785723	[D5] process_boolean_info: !chrg
 524.785740	[D3] Report[buf]: (4 bytes) => 32 00 00 09
 524.785754	[D5] PhyMax = 0, PhyMin = 0, LogMax = 1, LogMin = 0
 524.785766	[D5] Unit = 00000000, UnitExp = 0
 524.785777	[D5] Exponent = 0
 524.785789	[D5] hid_lookup_path: 00840004 -> UPS
 524.785802	[D5] hid_lookup_path: 00840024 -> PowerSummary
 524.785816	[D5] hid_lookup_path: 00840002 -> PresentStatus
 524.785830	[D5] hid_lookup_path: 00850045 -> Discharging
 524.785845	[D2] Path: UPS.PowerSummary.PresentStatus.Discharging, Type: Input, ReportID: 0x32, Offset: 21, Size: 1, Value: 0
 524.785861	[D5] hu_find_infoval: found !dischrg (value: 0)
 524.785872	[D5] process_boolean_info: !dischrg
 524.785891	[D3] Report[buf]: (4 bytes) => 32 00 00 09
 524.785904	[D5] PhyMax = 0, PhyMin = 0, LogMax = 1, LogMin = 0
 524.785916	[D5] Unit = 00000000, UnitExp = 0
 524.785928	[D5] Exponent = 0
 524.785940	[D5] hid_lookup_path: 00840004 -> UPS
 524.785953	[D5] hid_lookup_path: 00840024 -> PowerSummary
 524.785967	[D5] hid_lookup_path: 00840002 -> PresentStatus
 524.785981	[D5] hid_lookup_path: 00850047 -> FullyDischarged
 524.785996	[D2] Path: UPS.PowerSummary.PresentStatus.FullyDischarged, Type: Input, ReportID: 0x32, Offset: 22, Size: 1, Value: 0
 524.786011	[D5] hu_find_infoval: found !depleted (value: 0)
 524.786023	[D5] process_boolean_info: !depleted
 524.786044	[D3] Report[buf]: (4 bytes) => 32 00 00 09
 524.786058	[D5] PhyMax = 0, PhyMin = 0, LogMax = 1, LogMin = 0
 524.786070	[D5] Unit = 00000000, UnitExp = 0
 524.786082	[D5] Exponent = 0
 524.786094	[D5] hid_lookup_path: 00840004 -> UPS
 524.786107	[D5] hid_lookup_path: 00840024 -> PowerSummary
 524.786120	[D5] hid_lookup_path: 00840002 -> PresentStatus
 524.786134	[D5] hid_lookup_path: 0085004b -> NeedReplacement
 524.786149	[D2] Path: UPS.PowerSummary.PresentStatus.NeedReplacement, Type: Input, ReportID: 0x32, Offset: 23, Size: 1, Value: 0
 524.786165	[D5] hu_find_infoval: found !replacebatt (value: 0)
 524.786176	[D5] process_boolean_info: !replacebatt
 524.786195	[D1] Quick update...
 524.786210	[D4] Entering libusb_get_report
 524.787372	[D3] Report[get]: (3 bytes) => 61 ff ff
 524.787461	[D5] PhyMax = 0, PhyMin = 0, LogMax = 65535, LogMin = 0
 524.787478	[D5] Unit = 00001001, UnitExp = 0
 524.787491	[D5] Exponent = 0
 524.787508	[D2] Path: UPS.OutletSystem.Outlet.DelayBeforeStartup, Type: Feature, ReportID: 0x61, Offset: 0, Size: 16, Value: 65535
 524.787540	[D4] Entering libusb_get_report
 524.788372	[D3] Report[get]: (3 bytes) => 15 ff ff
 524.788461	[D5] PhyMax = 0, PhyMin = 0, LogMax = 65535, LogMin = 0
 524.788485	[D5] Unit = 00001001, UnitExp = 0
 524.788507	[D5] Exponent = 0
 524.788537	[D2] Path: UPS.OutletSystem.Outlet.DelayBeforeShutdown, Type: Feature, ReportID: 0x15, Offset: 0, Size: 16, Value: 65535
 524.788580	[D4] Entering libusb_get_report
 524.789535	[D3] Report[get]: (3 bytes) => 17 ff ff
 524.789623	[D5] PhyMax = 0, PhyMin = 0, LogMax = 65535, LogMin = 0
 524.789639	[D5] Unit = 00001001, UnitExp = 0
 524.789651	[D5] Exponent = 0
 524.789669	[D2] Path: UPS.OutletSystem.Outlet.DelayBeforeReboot, Type: Feature, ReportID: 0x17, Offset: 0, Size: 16, Value: 65535
 524.789869	[D3] Report[buf]: (4 bytes) => 32 00 00 09
 524.789896	[D5] PhyMax = 0, PhyMin = 0, LogMax = 1, LogMin = 0
 524.789910	[D5] Unit = 00000000, UnitExp = 0
 524.789922	[D5] Exponent = 0
 524.789938	[D2] Path: UPS.PowerSummary.PresentStatus.ACPresent, Type: Feature, ReportID: 0x32, Offset: 16, Size: 1, Value: 1
 524.789952	[D5] hu_find_infoval: found online (value: 1)
 524.789965	[D5] process_boolean_info: online
 524.789984	[D3] Report[buf]: (4 bytes) => 32 00 00 09
 524.789998	[D5] PhyMax = 0, PhyMin = 0, LogMax = 1, LogMin = 0
 524.790010	[D5] Unit = 00000000, UnitExp = 0
 524.790021	[D5] Exponent = 0
 524.790036	[D2] Path: UPS.PowerSummary.PresentStatus.BelowRemainingCapacityLimit, Type: Feature, ReportID: 0x32, Offset: 18, Size: 1, Value: 0
 524.790049	[D5] hu_find_infoval: found !lowbatt (value: 0)
 524.790061	[D5] process_boolean_info: !lowbatt
 524.790079	[D3] Report[buf]: (4 bytes) => 32 00 00 09
 524.790092	[D5] PhyMax = 0, PhyMin = 0, LogMax = 1, LogMin = 0
 524.790104	[D5] Unit = 00000000, UnitExp = 0
 524.790115	[D5] Exponent = 0
 524.790130	[D2] Path: UPS.PowerSummary.PresentStatus.FullyCharged, Type: Feature, ReportID: 0x32, Offset: 19, Size: 1, Value: 1
 524.790142	[D5] hu_find_infoval: found fullycharged (value: 1)
 524.790154	[D5] process_boolean_info: fullycharged
 524.790175	[D3] Report[buf]: (4 bytes) => 32 00 00 09
 524.790189	[D5] PhyMax = 0, PhyMin = 0, LogMax = 1, LogMin = 0
 524.790201	[D5] Unit = 00000000, UnitExp = 0
 524.790212	[D5] Exponent = 0
 524.790226	[D2] Path: UPS.PowerSummary.PresentStatus.Charging, Type: Feature, ReportID: 0x32, Offset: 20, Size: 1, Value: 0
 524.790832	[D5] hu_find_infoval: found !chrg (value: 0)
 524.790875	[D5] process_boolean_info: !chrg
 524.790903	[D3] Report[buf]: (4 bytes) => 32 00 00 09
 524.790919	[D5] PhyMax = 0, PhyMin = 0, LogMax = 1, LogMin = 0
 524.790932	[D5] Unit = 00000000, UnitExp = 0
 524.790945	[D5] Exponent = 0
 524.790960	[D2] Path: UPS.PowerSummary.PresentStatus.Discharging, Type: Feature, ReportID: 0x32, Offset: 21, Size: 1, Value: 0
 524.790973	[D5] hu_find_infoval: found !dischrg (value: 0)
 524.790984	[D5] process_boolean_info: !dischrg
 524.791002	[D3] Report[buf]: (4 bytes) => 32 00 00 09
 524.791015	[D5] PhyMax = 0, PhyMin = 0, LogMax = 1, LogMin = 0
 524.791027	[D5] Unit = 00000000, UnitExp = 0
 524.791038	[D5] Exponent = 0
 524.791053	[D2] Path: UPS.PowerSummary.PresentStatus.FullyDischarged, Type: Feature, ReportID: 0x32, Offset: 22, Size: 1, Value: 0
 524.791066	[D5] hu_find_infoval: found !depleted (value: 0)
 524.791077	[D5] process_boolean_info: !depleted
 524.791151	[D5] send_to_all: SETINFO driver.state "quiet"
 524.791401	[D6] send_to_all: write 29 bytes to socket 9 succeeded (ret=29): SETINFO driver.state "quiet"

[dennypage]

@ghound said in NUT Package (2.8.1 and above):

Output is to the console, should I redirect it to a file or will I be able to capture what you are looking for from console scrollback?

I expect that you will want to direct it to a file so you don't loose it due to scrolling or other issues.

[ghound]

@dennypage said in NUT Package (2.8.1 and above):

Can you run the driver by hand in debug mode via ssh please?

First start the service, and then kill the driver:

killall usbhid-ups
Then, run the driver with debug:

/usr/local/libexec/nut/usbhid-ups -DDDDDD -a TrippLite

This is the result around the point when connection to the UPS was lost (around one day after the process was started):

72245.572443	[D1] upsdrv_updateinfo...
72245.599003	[D2] file_report_buffer: expected 4 bytes, but got 512 instead
72245.599080	[D3] Report[err]: (512 bytes) => 32 00 00 09 00 00 00 00 f0 9f 6a 80 00 00 00 00
72245.599112	[D3]  00 00 00 00 00 00 00 00 98 ea f4 45 48 49 3a c1 80 a0 6a 80 ff ff ff ff 40
72245.599141	[D3]  9e 6a 80 00 00 00 00 14 b1 b6 83 00 00 00 00 4f 1e ef 65 00 00 00 00 00 50
72245.599171	[D3]  27 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60 27 00 00 00 00 00 02 00 00
72245.599201	[D3]  00 00 00 00 00 00 60 27 00 00 00 00 00 41 3c 21 00 00 00 00 00 5c 8d 20 00
72245.599230	[D3]  00 00 00 00 78 9f 6a 80 00 00 00 00 00 02 00 00 00 00 00 00 f0 a1 6a 80 00
72245.599259	[D3]  00 00 00 30 9f 6a 80 00 00 00 00 f0 9e 6a 80 00 00 00 00 d8 ff ff ff 80 ff
72245.599288	[D3]  ff ff 3f 9f 6a 80 00 00 00 00 b8 c3 c2 83 00 00 00 00 9a 9f 6a 80 00 00 00
72245.599317	[D3]  00 00 00 00 00 dd 01 00 00 08 02 ff ff 00 00 00 00 78 9f 6a 80 00 00 00 00
72245.599346	[D3]  ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
72245.599414	[D3]  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
72245.599446	[D3]  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
72245.599476	[D3]  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
72245.599504	[D3]  52 25 8a 3f 98 ea f4 45 48 49 3a c1 00 9e 6a 80 00 00 00 00 cc 63 b7 83 00
72245.599533	[D3]  00 00 00 00 00 00 00 00 00 00 00 00 60 27 00 00 00 00 00 02 00 00 00 00 00
72245.599562	[D3]  00 00 00 70 27 00 00 00 00 00 41 3c 21 00 00 00 00 00 0d 00 00 00 00 00 00
72245.599591	[D3]  00 0d 00 00 00 00 00 00 00 68 9e 6a 80 00 00 00 00 4f 1e ef 65 00 00 00 00
72245.599620	[D3]  f9 65 6b 7b 2f e6 eb 38 00 00 00 00 00 00 00 00 98 ea f4 45 48 49 3a c1 30
72245.599649	[D3]  9e 6a 80 00 00 00 00 9c 5f b7 83 00 00 00 00 0d 00 00 00 00 00 00 00 00 00
72245.599678	[D3]  00 00 00 00 00 00 68 9e 6a 80 00 00 00 00 a0 9e 6a 80 00 00 00 00 80 9e 6a
72245.599704	[D3]  80 00 00 00 00 8c 61 b0 83 00 00 00 00 5c 8d 20 00 00 00 00 00
72245.599732	[D1] Got 9 HID objects...
72245.599752	[D3] Report[buf]: (4 bytes) => 32 00 00 09
72245.599768	[D5] PhyMax = 0, PhyMin = 0, LogMax = 1, LogMin = 0
72245.599781	[D5] Unit = 00000000, UnitExp = 0
72245.599793	[D5] Exponent = 0
72245.599808	[D5] hid_lookup_path: 00840004 -> UPS
72245.599823	[D5] hid_lookup_path: 00840024 -> PowerSummary
72245.599837	[D5] hid_lookup_path: 00840002 -> PresentStatus
72245.599850	[D5] hid_lookup_path: 00840062 -> InternalFailure
72245.599866	[D2] Path: UPS.PowerSummary.PresentStatus.InternalFailure, Type: Input, ReportID: 0x32, Offset: 7, Size: 1, Value: 0
72245.599884	[D5] hu_find_infoval: found !commfault (value: 0)
72245.599897	[D5] process_boolean_info: !commfault
72245.599924	[D3] Report[buf]: (4 bytes) => 32 00 00 09
72245.599938	[D5] PhyMax = 0, PhyMin = 0, LogMax = 1, LogMin = 0
72245.599950	[D5] Unit = 00000000, UnitExp = 0
72245.599961	[D5] Exponent = 0
72245.599973	[D5] hid_lookup_path: 00840004 -> UPS
72245.599986	[D5] hid_lookup_path: 00840024 -> PowerSummary
72245.600000	[D5] hid_lookup_path: 00840002 -> PresentStatus
72245.600013	[D5] hid_lookup_path: 00840069 -> ShutdownImminent
72245.600028	[D2] Path: UPS.PowerSummary.PresentStatus.ShutdownImminent, Type: Input, ReportID: 0x32, Offset: 9, Size: 1, Value: 0
72245.600044	[D5] hu_find_infoval: found !shutdownimm (value: 0)
72245.600056	[D5] process_boolean_info: !shutdownimm
72245.600076	[D3] Report[buf]: (4 bytes) => 32 00 00 09
72245.600089	[D5] PhyMax = 0, PhyMin = 0, LogMax = 1, LogMin = 0
72245.600101	[D5] Unit = 00000000, UnitExp = 0
72245.600112	[D5] Exponent = 0
72245.600124	[D5] hid_lookup_path: 00840004 -> UPS
72245.600138	[D5] hid_lookup_path: 00840024 -> PowerSummary
72245.600151	[D5] hid_lookup_path: 00840002 -> PresentStatus
72245.600167	[D5] hid_lookup_path: 008500d0 -> ACPresent
72245.600183	[D2] Path: UPS.PowerSummary.PresentStatus.ACPresent, Type: Input, ReportID: 0x32, Offset: 16, Size: 1, Value: 1
72245.600197	[D5] hu_find_infoval: found online (value: 1)
72245.600209	[D5] process_boolean_info: online
72245.600227	[D3] Report[buf]: (4 bytes) => 32 00 00 09
72245.600240	[D5] PhyMax = 0, PhyMin = 0, LogMax = 1, LogMin = 0
72245.600252	[D5] Unit = 00000000, UnitExp = 0
72245.600263	[D5] Exponent = 0
72245.600275	[D5] hid_lookup_path: 00840004 -> UPS
72245.600288	[D5] hid_lookup_path: 00840024 -> PowerSummary
72245.600301	[D5] hid_lookup_path: 00840002 -> PresentStatus
72245.600315	[D5] hid_lookup_path: 00850042 -> BelowRemainingCapacityLimit
72245.600330	[D2] Path: UPS.PowerSummary.PresentStatus.BelowRemainingCapacityLimit, Type: Input, ReportID: 0x32, Offset: 18, Size: 1, Value: 0
72245.600345	[D5] hu_find_infoval: found !lowbatt (value: 0)
72245.600356	[D5] process_boolean_info: !lowbatt
72245.600374	[D3] Report[buf]: (4 bytes) => 32 00 00 09
72245.600394	[D5] PhyMax = 0, PhyMin = 0, LogMax = 1, LogMin = 0
72245.600407	[D5] Unit = 00000000, UnitExp = 0
72245.600418	[D5] Exponent = 0
72245.600430	[D5] hid_lookup_path: 00840004 -> UPS
72245.600444	[D5] hid_lookup_path: 00840024 -> PowerSummary
72245.600457	[D5] hid_lookup_path: 00840002 -> PresentStatus
72245.600470	[D5] hid_lookup_path: 00850046 -> FullyCharged
72245.600486	[D2] Path: UPS.PowerSummary.PresentStatus.FullyCharged, Type: Input, ReportID: 0x32, Offset: 19, Size: 1, Value: 1
72245.600501	[D5] hu_find_infoval: found fullycharged (value: 1)
72245.600513	[D5] process_boolean_info: fullycharged
72245.600535	[D3] Report[buf]: (4 bytes) => 32 00 00 09
72245.600548	[D5] PhyMax = 0, PhyMin = 0, LogMax = 1, LogMin = 0
72245.600560	[D5] Unit = 00000000, UnitExp = 0
72245.600571	[D5] Exponent = 0
72245.600583	[D5] hid_lookup_path: 00840004 -> UPS
72245.600596	[D5] hid_lookup_path: 00840024 -> PowerSummary
72245.600609	[D5] hid_lookup_path: 00840002 -> PresentStatus
72245.600623	[D5] hid_lookup_path: 00850044 -> Charging
72245.600637	[D2] Path: UPS.PowerSummary.PresentStatus.Charging, Type: Input, ReportID: 0x32, Offset: 20, Size: 1, Value: 0
72245.600652	[D5] hu_find_infoval: found !chrg (value: 0)
72245.600664	[D5] process_boolean_info: !chrg
72245.600682	[D3] Report[buf]: (4 bytes) => 32 00 00 09
72245.600695	[D5] PhyMax = 0, PhyMin = 0, LogMax = 1, LogMin = 0
72245.600707	[D5] Unit = 00000000, UnitExp = 0
72245.600718	[D5] Exponent = 0
72245.600730	[D5] hid_lookup_path: 00840004 -> UPS
72245.600744	[D5] hid_lookup_path: 00840024 -> PowerSummary
72245.600757	[D5] hid_lookup_path: 00840002 -> PresentStatus
72245.600770	[D5] hid_lookup_path: 00850045 -> Discharging
72245.600785	[D2] Path: UPS.PowerSummary.PresentStatus.Discharging, Type: Input, ReportID: 0x32, Offset: 21, Size: 1, Value: 0
72245.600800	[D5] hu_find_infoval: found !dischrg (value: 0)
72245.600811	[D5] process_boolean_info: !dischrg
72245.600829	[D3] Report[buf]: (4 bytes) => 32 00 00 09
72245.600842	[D5] PhyMax = 0, PhyMin = 0, LogMax = 1, LogMin = 0
72245.600854	[D5] Unit = 00000000, UnitExp = 0
72245.600865	[D5] Exponent = 0
72245.600877	[D5] hid_lookup_path: 00840004 -> UPS
72245.600890	[D5] hid_lookup_path: 00840024 -> PowerSummary
72245.600903	[D5] hid_lookup_path: 00840002 -> PresentStatus
72245.600917	[D5] hid_lookup_path: 00850047 -> FullyDischarged
72245.600931	[D2] Path: UPS.PowerSummary.PresentStatus.FullyDischarged, Type: Input, ReportID: 0x32, Offset: 22, Size: 1, Value: 0
72245.600946	[D5] hu_find_infoval: found !depleted (value: 0)
72245.600958	[D5] process_boolean_info: !depleted
72245.600979	[D3] Report[buf]: (4 bytes) => 32 00 00 09
72245.600993	[D5] PhyMax = 0, PhyMin = 0, LogMax = 1, LogMin = 0
72245.601005	[D5] Unit = 00000000, UnitExp = 0
72245.601017	[D5] Exponent = 0
72245.601029	[D5] hid_lookup_path: 00840004 -> UPS
72245.601042	[D5] hid_lookup_path: 00840024 -> PowerSummary
72245.601055	[D5] hid_lookup_path: 00840002 -> PresentStatus
72245.601069	[D5] hid_lookup_path: 0085004b -> NeedReplacement
72245.601084	[D2] Path: UPS.PowerSummary.PresentStatus.NeedReplacement, Type: Input, ReportID: 0x32, Offset: 23, Size: 1, Value: 0
72245.601099	[D5] hu_find_infoval: found !replacebatt (value: 0)
72245.601111	[D5] process_boolean_info: !replacebatt
72245.601129	[D1] Quick update...
72245.601144	[D4] Entering libusb_get_report
72245.601911	[D3] Report[get]: (3 bytes) => 61 ff ff
72245.601975	[D5] PhyMax = 0, PhyMin = 0, LogMax = 65535, LogMin = 0
72245.601991	[D5] Unit = 00001001, UnitExp = 0
72245.602004	[D5] Exponent = 0
72245.602021	[D2] Path: UPS.OutletSystem.Outlet.DelayBeforeStartup, Type: Feature, ReportID: 0x61, Offset: 0, Size: 16, Value: 65535
72245.602051	[D4] Entering libusb_get_report
72245.602892	[D3] Report[get]: (3 bytes) => 15 ff ff
72245.602944	[D5] PhyMax = 0, PhyMin = 0, LogMax = 65535, LogMin = 0
72245.602958	[D5] Unit = 00001001, UnitExp = 0
72245.602972	[D5] Exponent = 0
72245.602988	[D2] Path: UPS.OutletSystem.Outlet.DelayBeforeShutdown, Type: Feature, ReportID: 0x15, Offset: 0, Size: 16, Value: 65535
72245.603016	[D4] Entering libusb_get_report
72245.603890	[D3] Report[get]: (3 bytes) => 17 ff ff
72245.603934	[D5] PhyMax = 0, PhyMin = 0, LogMax = 65535, LogMin = 0
72245.603948	[D5] Unit = 00001001, UnitExp = 0
72245.603961	[D5] Exponent = 0
72245.603978	[D2] Path: UPS.OutletSystem.Outlet.DelayBeforeReboot, Type: Feature, ReportID: 0x17, Offset: 0, Size: 16, Value: 65535
72245.604013	[D3] Report[buf]: (4 bytes) => 32 00 00 09
72245.604027	[D5] PhyMax = 0, PhyMin = 0, LogMax = 1, LogMin = 0
72245.604040	[D5] Unit = 00000000, UnitExp = 0
72245.604051	[D5] Exponent = 0
72245.604067	[D2] Path: UPS.PowerSummary.PresentStatus.ACPresent, Type: Feature, ReportID: 0x32, Offset: 16, Size: 1, Value: 1
72245.604080	[D5] hu_find_infoval: found online (value: 1)
72245.604092	[D5] process_boolean_info: online
72245.604111	[D3] Report[buf]: (4 bytes) => 32 00 00 09
72245.604124	[D5] PhyMax = 0, PhyMin = 0, LogMax = 1, LogMin = 0
72245.604136	[D5] Unit = 00000000, UnitExp = 0
72245.604148	[D5] Exponent = 0
72245.604162	[D2] Path: UPS.PowerSummary.PresentStatus.BelowRemainingCapacityLimit, Type: Feature, ReportID: 0x32, Offset: 18, Size: 1, Value: 0
72245.604175	[D5] hu_find_infoval: found !lowbatt (value: 0)
72245.604187	[D5] process_boolean_info: !lowbatt
72245.604205	[D3] Report[buf]: (4 bytes) => 32 00 00 09
72245.604218	[D5] PhyMax = 0, PhyMin = 0, LogMax = 1, LogMin = 0
72245.604230	[D5] Unit = 00000000, UnitExp = 0
72245.604241	[D5] Exponent = 0
72245.604256	[D2] Path: UPS.PowerSummary.PresentStatus.FullyCharged, Type: Feature, ReportID: 0x32, Offset: 19, Size: 1, Value: 1
72245.604268	[D5] hu_find_infoval: found fullycharged (value: 1)
72245.604280	[D5] process_boolean_info: fullycharged
72245.604302	[D3] Report[buf]: (4 bytes) => 32 00 00 09
72245.604315	[D5] PhyMax = 0, PhyMin = 0, LogMax = 1, LogMin = 0
72245.604327	[D5] Unit = 00000000, UnitExp = 0
72245.604339	[D5] Exponent = 0
72245.604353	[D2] Path: UPS.PowerSummary.PresentStatus.Charging, Type: Feature, ReportID: 0x32, Offset: 20, Size: 1, Value: 0
72245.604366	[D5] hu_find_infoval: found !chrg (value: 0)
72245.604392	[D5] process_boolean_info: !chrg
72245.604409	[D3] Report[buf]: (4 bytes) => 32 00 00 09
72245.604423	[D5] PhyMax = 0, PhyMin = 0, LogMax = 1, LogMin = 0
72245.604435	[D5] Unit = 00000000, UnitExp = 0
72245.604446	[D5] Exponent = 0
72245.604460	[D2] Path: UPS.PowerSummary.PresentStatus.Discharging, Type: Feature, ReportID: 0x32, Offset: 21, Size: 1, Value: 0
72245.604473	[D5] hu_find_infoval: found !dischrg (value: 0)
72245.604484	[D5] process_boolean_info: !dischrg
72245.604502	[D3] Report[buf]: (4 bytes) => 32 00 00 09
72245.604515	[D5] PhyMax = 0, PhyMin = 0, LogMax = 1, LogMin = 0
72245.604527	[D5] Unit = 00000000, UnitExp = 0
72245.604538	[D5] Exponent = 0
72245.604552	[D2] Path: UPS.PowerSummary.PresentStatus.FullyDischarged, Type: Feature, ReportID: 0x32, Offset: 22, Size: 1, Value: 0
72245.604565	[D5] hu_find_infoval: found !depleted (value: 0)
72245.604576	[D5] process_boolean_info: !depleted
72245.604640	[D5] send_to_all: SETINFO driver.state "quiet"
72245.604783	[D6] send_to_all: write 29 bytes to socket 9 succeeded (ret=29): SETINFO driver.state "quiet"

72247.581943	[D5] send_to_all: SETINFO driver.state "updateinfo"
72247.582155	[D6] send_to_all: write 34 bytes to socket 9 succeeded (ret=34): SETINFO driver.state "updateinfo"

72247.582177	[D1] upsdrv_updateinfo...
72247.647068	[D2] file_report_buffer: expected 2 bytes, but got 512 instead
72247.647148	[D3] Report[err]: (512 bytes) => 34 64 00 00 00 00 00 00 f0 9f 6a 80 00 00 00 00
72247.647180	[D3]  00 00 00 00 00 00 00 00 98 ea f4 45 48 49 3a c1 80 a0 6a 80 ff ff ff ff 40
72247.647210	[D3]  9e 6a 80 00 00 00 00 14 b1 b6 83 00 00 00 00 51 1e ef 65 00 00 00 00 00 50
72247.647239	[D3]  27 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60 27 00 00 00 00 00 02 00 00
72247.647268	[D3]  00 00 00 00 00 00 60 27 00 00 00 00 00 41 3c 21 00 00 00 00 00 5c 8d 20 00
72247.647297	[D3]  00 00 00 00 78 9f 6a 80 00 00 00 00 00 02 00 00 00 00 00 00 f0 a1 6a 80 00
72247.647326	[D3]  00 00 00 30 9f 6a 80 00 00 00 00 f0 9e 6a 80 00 00 00 00 d8 ff ff ff 80 ff
72247.647355	[D3]  ff ff 3f 9f 6a 80 00 00 00 00 b8 c3 c2 83 00 00 00 00 9a 9f 6a 80 00 00 00
72247.647388	[D3]  00 00 00 00 00 dd 01 00 00 08 02 ff ff 00 00 00 00 78 9f 6a 80 00 00 00 00
72247.647418	[D3]  ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
72247.647448	[D3]  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
72247.647477	[D3]  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
72247.647506	[D3]  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
72247.647534	[D3]  3f 78 09 41 98 ea f4 45 48 49 3a c1 00 9e 6a 80 00 00 00 00 cc 63 b7 83 00
72247.647564	[D3]  00 00 00 00 00 00 00 00 00 00 00 00 60 27 00 00 00 00 00 02 00 00 00 00 00
72247.647593	[D3]  00 00 00 70 27 00 00 00 00 00 41 3c 21 00 00 00 00 00 0d 00 00 00 00 00 00
72247.647622	[D3]  00 0d 00 00 00 00 00 00 00 68 9e 6a 80 00 00 00 00 51 1e ef 65 00 00 00 00
72247.647653	[D3]  93 e8 dc 78 a4 e7 69 3b 00 00 00 00 00 00 00 00 98 ea f4 45 48 49 3a c1 30
72247.647682	[D3]  9e 6a 80 00 00 00 00 9c 5f b7 83 00 00 00 00 0d 00 00 00 00 00 00 00 00 00
72247.647710	[D3]  00 00 00 00 00 00 68 9e 6a 80 00 00 00 00 a0 9e 6a 80 00 00 00 00 80 9e 6a
72247.647737	[D3]  80 00 00 00 00 8c 61 b0 83 00 00 00 00 5c 8d 20 00 00 00 00 00
72247.647764	[D1] Got 1 HID objects...
72247.647781	[D3] Report[buf]: (2 bytes) => 34 64
72247.647797	[D5] PhyMax = 0, PhyMin = 0, LogMax = 255, LogMin = 0
72247.647810	[D5] Unit = 00000000, UnitExp = 0
72247.647822	[D5] Exponent = 0
72247.647837	[D5] hid_lookup_path: 00840004 -> UPS
72247.647852	[D5] hid_lookup_path: 00840024 -> PowerSummary
72247.647867	[D5] hid_lookup_path: 00850066 -> RemainingCapacity
72247.647884	[D2] Path: UPS.PowerSummary.RemainingCapacity, Type: Input, ReportID: 0x34, Offset: 0, Size: 8, Value: 100
72247.647919	[D1] Quick update...
72247.647935	[D4] Entering libusb_get_report
72247.648925	[D3] Report[get]: (3 bytes) => 61 ff ff
72247.648983	[D5] PhyMax = 0, PhyMin = 0, LogMax = 65535, LogMin = 0
72247.649032	[D5] Unit = 00001001, UnitExp = 0
72247.649047	[D5] Exponent = 0
72247.649064	[D2] Path: UPS.OutletSystem.Outlet.DelayBeforeStartup, Type: Feature, ReportID: 0x61, Offset: 0, Size: 16, Value: 65535
72247.649095	[D4] Entering libusb_get_report
72247.649932	[D3] Report[get]: (3 bytes) => 15 ff ff
72247.649995	[D5] PhyMax = 0, PhyMin = 0, LogMax = 65535, LogMin = 0
72247.650010	[D5] Unit = 00001001, UnitExp = 0
72247.650023	[D5] Exponent = 0
72247.650041	[D2] Path: UPS.OutletSystem.Outlet.DelayBeforeShutdown, Type: Feature, ReportID: 0x15, Offset: 0, Size: 16, Value: 65535
72247.650072	[D4] Entering libusb_get_report
72247.727371	nut_libusb_get_report: No device
72247.727469	[D1] Can't retrieve Report 17: Interrupted system call
72247.727532	[D5] send_to_all: SETINFO driver.state "reconnect.trying"
72247.727733	[D6] send_to_all: write 40 bytes to socket 9 succeeded (ret=40): SETINFO driver.state "reconnect.trying"

72247.727777	[D5] send_to_all: SETINFO driver.state "quiet"
72247.727879	[D6] send_to_all: write 29 bytes to socket 9 succeeded (ret=29): SETINFO driver.state "quiet"

72249.583257	[D5] send_to_all: SETINFO driver.state "updateinfo"
72249.583466	[D6] send_to_all: write 34 bytes to socket 9 succeeded (ret=34): SETINFO driver.state "updateinfo"

72249.583501	[D1] upsdrv_updateinfo...
72249.583516	[D1] Got to reconnect!
72249.583543	[D5] send_to_all: SETINFO driver.state "reconnect.trying"
72249.583569	[D6] send_to_all: write 40 bytes to socket 9 succeeded (ret=40): SETINFO driver.state "reconnect.trying"

72249.583596	[D4] Closing comm_driver previous handle
72249.586916	[D4] ===================================================================
72249.586973	[D4]  device has been disconnected, try to reconnect
72249.586987	[D4] ===================================================================
72249.586999	[D4] Opening comm_driver ...
72249.587552	[D2] Checking device 1 of 3 (0000/0000)
72249.587798	[D1] nut_libusb_open: invalid libusb bus number 0
72249.587882	[D2] - VendorID: 0000
72249.587897	[D2] - ProductID: 0000
72249.587910	[D2] - Manufacturer: Generic
72249.587922	[D2] - Product: XHCI root HUB
72249.587934	[D2] - Serial Number: unknown
72249.587946	[D2] - Bus: 000
72249.587957	[D2] - Bus Port: unknown
72249.587968	[D2] - Device: 001
72249.587980	[D2] - Device release number: 0100
72249.587991	[D2] Trying to match device
72249.588013	[D2] match_function_subdriver (non-SHUT mode): matching a device...
72249.588048	[D2] match_function_subdriver (non-SHUT mode): failed to match a subdriver to vendor and/or product ID
72249.588062	[D2] Device does not match - skipping
72249.588150	[D2] Checking device 2 of 3 (0000/0000)
72249.588301	[D1] nut_libusb_open: invalid libusb bus number 0
72249.588361	[D2] - VendorID: 0000
72249.588384	[D2] - ProductID: 0000
72249.588397	[D2] - Manufacturer: Marvell
72249.588409	[D2] - Product: EHCI root HUB
72249.588421	[D2] - Serial Number: unknown
72249.588432	[D2] - Bus: 001
72249.588443	[D2] - Bus Port: unknown
72249.588454	[D2] - Device: 001
72249.588466	[D2] - Device release number: 0100
72249.588477	[D2] Trying to match device
72249.588496	[D2] match_function_subdriver (non-SHUT mode): matching a device...
72249.588525	[D2] match_function_subdriver (non-SHUT mode): failed to match a subdriver to vendor and/or product ID
72249.588539	[D2] Device does not match - skipping
72249.588619	[D2] Checking device 3 of 3 (09AE/3024)
72249.743398	[D1] nut_libusb_open get iManufacturer failed, retrying...
72249.893627	[D1] nut_libusb_open get iManufacturer failed, retrying...
72250.048371	[D1] nut_libusb_open get iManufacturer failed, retrying...
72250.198508	[D1] nut_libusb_open get iProduct failed, retrying...
72250.347839	[D1] nut_libusb_open get iProduct failed, retrying...
72250.499443	[D1] nut_libusb_open get iProduct failed, retrying...
72250.649305	[D1] nut_libusb_open get iSerialNumber failed, retrying...
72250.803444	[D1] nut_libusb_open get iSerialNumber failed, retrying...
72250.955470	[D1] nut_libusb_open get iSerialNumber failed, retrying...
72250.955570	[D2] - VendorID: 09ae
72250.955585	[D2] - ProductID: 3024
72250.955597	[D2] - Manufacturer: unknown
72250.955609	[D2] - Product: unknown
72250.955621	[D2] - Serial Number: unknown
72250.955633	[D2] - Bus: 001
72250.955644	[D2] - Bus Port: 001
72250.955655	[D2] - Device: 002
72250.955667	[D2] - Device release number: 0002
72250.955679	[D2] Trying to match device
72250.955704	[D2] match_function_subdriver (non-SHUT mode): matching a device...
72250.955744	[D3] match_function_regex: matching a device...
72250.955766	[D3] match_function_exact: matching a device...
72250.955782	[D2] match_function_exact: failed match of Vendor: (null) != Tripp Lite
72250.955795	[D2] Device does not match - skipping
72250.955954	[D2] libusb1: No appropriate HID device found
72250.955978	libusb1: Could not open any HID devices: insufficient permissions on everything
72250.955994	[D4] Opening comm_driver returns ret=-1
72250.956021	[D5] send_to_all: SETINFO driver.state "quiet"
72250.956052	[D6] send_to_all: write 29 bytes to socket 9 succeeded (ret=29): SETINFO driver.state "quiet"

72250.956067	[D5] send_to_all: DATASTALE
72250.956086	[D6] send_to_all: write 10 bytes to socket 9 succeeded (ret=10): DATASTALE

72251.588983	[D5] send_to_all: SETINFO driver.state "updateinfo"
72251.589141	[D6] send_to_all: write 34 bytes to socket 9 succeeded (ret=34): SETINFO driver.state "updateinfo"

72251.589165	[D1] upsdrv_updateinfo...
72251.589179	[D1] Got to reconnect!
72251.589201	[D5] send_to_all: SETINFO driver.state "reconnect.trying"
72251.589225	[D6] send_to_all: write 40 bytes to socket 9 succeeded (ret=40): SETINFO driver.state "reconnect.trying"

72251.589247	[D4] Not closing comm_driver previous handle: already closed
72251.589260	[D4] ===================================================================
72251.589272	[D4]  device has been disconnected, try to reconnect
72251.589284	[D4] ===================================================================
72251.589296	[D4] Opening comm_driver ...
72251.589870	[D2] Checking device 1 of 3 (0000/0000)
72251.590057	[D1] nut_libusb_open: invalid libusb bus number 0
72251.590139	[D2] - VendorID: 0000
72251.590154	[D2] - ProductID: 0000
72251.590166	[D2] - Manufacturer: Generic
72251.590178	[D2] - Product: XHCI root HUB
72251.590190	[D2] - Serial Number: unknown
72251.590203	[D2] - Bus: 000
72251.590214	[D2] - Bus Port: unknown
72251.590226	[D2] - Device: 001
72251.590237	[D2] - Device release number: 0100
72251.590249	[D2] Trying to match device
72251.590271	[D2] match_function_subdriver (non-SHUT mode): matching a device...
72251.590307	[D2] match_function_subdriver (non-SHUT mode): failed to match a subdriver to vendor and/or product ID
72251.590322	[D2] Device does not match - skipping
72251.590444	[D2] Checking device 2 of 3 (0000/0000)
72251.590658	[D1] nut_libusb_open: invalid libusb bus number 0
72251.590755	[D2] - VendorID: 0000
72251.590771	[D2] - ProductID: 0000
72251.590785	[D2] - Manufacturer: Marvell
72251.590797	[D2] - Product: EHCI root HUB
72251.590809	[D2] - Serial Number: unknown
72251.590821	[D2] - Bus: 001
72251.590832	[D2] - Bus Port: unknown
72251.590843	[D2] - Device: 001
72251.590855	[D2] - Device release number: 0100
72251.590867	[D2] Trying to match device
72251.590886	[D2] match_function_subdriver (non-SHUT mode): matching a device...
72251.590918	[D2] match_function_subdriver (non-SHUT mode): failed to match a subdriver to vendor and/or product ID
72251.590932	[D2] Device does not match - skipping
72251.591030	[D2] Checking device 3 of 3 (09AE/3024)
72251.745371	[D1] nut_libusb_open get iManufacturer failed, retrying...
72251.895872	[D1] nut_libusb_open get iManufacturer failed, retrying...
72252.050367	[D1] nut_libusb_open get iManufacturer failed, retrying...
72252.205384	[D1] nut_libusb_open get iProduct failed, retrying...
72252.359364	[D1] nut_libusb_open get iProduct failed, retrying...
72252.513419	[D1] nut_libusb_open get iProduct failed, retrying...
72252.667482	[D1] nut_libusb_open get iSerialNumber failed, retrying...
72252.820954	[D1] nut_libusb_open get iSerialNumber failed, retrying...
72252.971389	[D1] nut_libusb_open get iSerialNumber failed, retrying...
72252.971473	[D2] - VendorID: 09ae
72252.971489	[D2] - ProductID: 3024
72252.971501	[D2] - Manufacturer: unknown
72252.971516	[D2] - Product: unknown
72252.971528	[D2] - Serial Number: unknown
72252.971540	[D2] - Bus: 001
72252.971551	[D2] - Bus Port: 001
72252.971563	[D2] - Device: 002
72252.971574	[D2] - Device release number: 0002
72252.971586	[D2] Trying to match device
72252.971609	[D2] match_function_subdriver (non-SHUT mode): matching a device...
72252.971645	[D3] match_function_regex: matching a device...
72252.971663	[D3] match_function_exact: matching a device...
72252.971678	[D2] match_function_exact: failed match of Vendor: (null) != Tripp Lite
72252.971690	[D2] Device does not match - skipping
72252.971846	[D2] libusb1: No appropriate HID device found
72252.971869	libusb1: Could not open any HID devices: insufficient permissions on everything
72252.971885	[D4] Opening comm_driver returns ret=-1
72252.971912	[D5] send_to_all: SETINFO driver.state "quiet"
72252.972008	[D6] send_to_all: write 29 bytes to socket 9 succeeded (ret=29): SETINFO driver.state "quiet"

[ghound]

@dennypage said in NUT Package (2.8.1 and above):

Can you run the driver by hand in debug mode via ssh please?

First start the service, and then kill the driver:

killall usbhid-ups
Then, run the driver with debug:

/usr/local/libexec/nut/usbhid-ups -DDDDDD -a TrippLite

FYI - this is the output when I tried to manually restart the driver after connection was lost:

   0.002954	[D2] Initializing an USB-connected UPS with library libusb-1.0.0 (API: 0x1000102) (NUT subdriver name='USB communication driver (libusb 1.0)' ver='0.46')
   0.003874	[D2] Checking device 1 of 3 (0000/0000)
   0.004670	[D1] nut_libusb_open: invalid libusb bus number 0
   0.004804	[D2] - VendorID: 0000
   0.004821	[D2] - ProductID: 0000
   0.004833	[D2] - Manufacturer: Generic
   0.004845	[D2] - Product: XHCI root HUB
   0.004856	[D2] - Serial Number: unknown
   0.004868	[D2] - Bus: 000
   0.004878	[D2] - Bus Port: unknown
   0.004889	[D2] - Device: 001
   0.004901	[D2] - Device release number: 0100
   0.004912	[D2] Trying to match device
   0.004934	[D2] match_function_subdriver (non-SHUT mode): matching a device...
   0.004978	[D2] match_function_subdriver (non-SHUT mode): failed to match a subdriver to vendor and/or product ID
   0.004991	[D2] Device does not match - skipping
   0.005115	[D2] Checking device 2 of 3 (0000/0000)
   0.005340	[D1] nut_libusb_open: invalid libusb bus number 0
   0.005432	[D2] - VendorID: 0000
   0.005447	[D2] - ProductID: 0000
   0.005458	[D2] - Manufacturer: Marvell
   0.005470	[D2] - Product: EHCI root HUB
   0.005481	[D2] - Serial Number: unknown
   0.005492	[D2] - Bus: 001
   0.005502	[D2] - Bus Port: unknown
   0.005513	[D2] - Device: 001
   0.005525	[D2] - Device release number: 0100
   0.005535	[D2] Trying to match device
   0.005554	[D2] match_function_subdriver (non-SHUT mode): matching a device...
   0.005596	[D2] match_function_subdriver (non-SHUT mode): failed to match a subdriver to vendor and/or product ID
   0.005610	[D2] Device does not match - skipping
   0.005713	[D2] Checking device 3 of 3 (09AE/3024)
   0.156567	[D1] nut_libusb_open get iManufacturer failed, retrying...
   0.310568	[D1] nut_libusb_open get iManufacturer failed, retrying...
   0.461572	[D1] nut_libusb_open get iManufacturer failed, retrying...
   0.608445	[D1] nut_libusb_open get iProduct failed, retrying...
   0.762543	[D1] nut_libusb_open get iProduct failed, retrying...
   0.912962	[D1] nut_libusb_open get iProduct failed, retrying...
   1.066550	[D1] nut_libusb_open get iSerialNumber failed, retrying...
   1.218542	[D1] nut_libusb_open get iSerialNumber failed, retrying...
   1.369116	[D1] nut_libusb_open get iSerialNumber failed, retrying...
   1.369185	[D2] - VendorID: 09ae
   1.369200	[D2] - ProductID: 3024
   1.369214	[D2] - Manufacturer: unknown
   1.369226	[D2] - Product: unknown
   1.369238	[D2] - Serial Number: unknown
   1.369249	[D2] - Bus: 001
   1.369261	[D2] - Bus Port: 001
   1.369273	[D2] - Device: 002
   1.369285	[D2] - Device release number: 0002
   1.369296	[D2] Trying to match device
   1.369319	[D2] match_function_subdriver (non-SHUT mode): matching a device...
   1.369424	[D3] match_function_regex: matching a device...
   1.369447	[D2] Device matches
   1.369460	[D2] Reading configuration descriptor 1 of 1
   1.369848	[D3] libusb_kernel_driver_active() returned 0: Success
   1.369919	[D2] Claimed interface 0 successfully
   1.369944	[D3] nut_usb_set_altinterface: skipped libusb_set_interface_alt_setting(udev, 0, 0)
   1.446624	[D2] Unable to get HID descriptor (No device)
   1.446696	[D3] HID descriptor length (method 1) -1
   1.446713	[D4] i=0, extra[i]=09, extra[i+1]=21
   1.446736	[D3] HID descriptor, method 2: (9 bytes) => 09 21 11 01 21 01 22 75 03
   1.446775	[D3] HID descriptor length (method 2) 885
   1.446789	[D2] HID descriptor length 885
   1.523598	[D2] Unable to get Report descriptor: Input/output error
   1.523845	[D2] libusb1: No appropriate HID device found
   1.524098	libusb1: Could not open any HID devices: insufficient permissions on everything
   1.524142	No matching HID UPS found
   1.524226	[D5] send_to_all: SETINFO driver.state "cleanup.exit"
   1.524248	upsnotify: failed to notify about state 4: no notification tech defined, will not spam more about it

And this was the initial good manual startup:

0.002990	[D2] Initializing an USB-connected UPS with library libusb-1.0.0 (API: 0x1000102) (NUT subdriver name='USB communication driver (libusb 1.0)' ver='0.46')
   0.003801	[D2] Checking device 1 of 3 (0000/0000)
   0.004569	[D1] nut_libusb_open: invalid libusb bus number 0
   0.004704	[D2] - VendorID: 0000
   0.004723	[D2] - ProductID: 0000
   0.004734	[D2] - Manufacturer: Generic
   0.004745	[D2] - Product: XHCI root HUB
   0.004757	[D2] - Serial Number: unknown
   0.004768	[D2] - Bus: 000
   0.004778	[D2] - Bus Port: unknown
   0.004789	[D2] - Device: 001
   0.004800	[D2] - Device release number: 0100
   0.004810	[D2] Trying to match device
   0.004832	[D2] match_function_subdriver (non-SHUT mode): matching a device...
   0.004876	[D2] match_function_subdriver (non-SHUT mode): failed to match a subdriver to vendor and/or product ID
   0.004888	[D2] Device does not match - skipping
   0.005006	[D2] Checking device 2 of 3 (0000/0000)
   0.005231	[D1] nut_libusb_open: invalid libusb bus number 0
   0.005323	[D2] - VendorID: 0000
   0.005337	[D2] - ProductID: 0000
   0.005349	[D2] - Manufacturer: Marvell
   0.005360	[D2] - Product: EHCI root HUB
   0.005371	[D2] - Serial Number: unknown
   0.005381	[D2] - Bus: 001
   0.005391	[D2] - Bus Port: unknown
   0.005402	[D2] - Device: 001
   0.005412	[D2] - Device release number: 0100
   0.005422	[D2] Trying to match device
   0.005442	[D2] match_function_subdriver (non-SHUT mode): matching a device...
   0.005476	[D2] match_function_subdriver (non-SHUT mode): failed to match a subdriver to vendor and/or product ID
   0.005489	[D2] Device does not match - skipping
   0.005585	[D2] Checking device 3 of 3 (09AE/3024)
   0.018725	[D2] - VendorID: 09ae
   0.018775	[D2] - ProductID: 3024
   0.018789	[D2] - Manufacturer: Tripp Lite
   0.018800	[D2] - Product: ECO850LCD       
   0.018811	[D2] - Serial Number: 3216CV4BC87F303175
   0.018822	[D2] - Bus: 001
   0.018832	[D2] - Bus Port: 001
   0.018843	[D2] - Device: 002
   0.018853	[D2] - Device release number: 0002
   0.018864	[D2] Trying to match device
   0.018884	[D2] match_function_subdriver (non-SHUT mode): matching a device...
   0.018983	[D3] match_function_regex: matching a device...
   0.019006	[D2] Device matches

[ghound]

@dennypage said in NUT Package (2.8.1 and above):

First start the service, and then kill the driver:

killall usbhid-ups
Then, run the driver with debug:

/usr/local/libexec/nut/usbhid-ups -DDDDDD -a TrippLite

Here is system log after disconnecting / reconnecting USB cable:

Mar 11 11:40:04	upsmon	8414	Poll UPS [TrippLite] failed - Driver not connected
Mar 11 11:40:01	kernel		 uhid0: <Tripp Lite ECO850LCD, class 0/0, rev 2.00/0.02, addr 2> on usbus1
Mar 11 11:40:01	kernel		uhid0 on uhub1
Mar 11 11:40:01	kernel		ugen1.2: <Tripp Lite ECO850LCD> at usbus1
Mar 11 11:39:59	upsmon	8414	Poll UPS [TrippLite] failed - Driver not connected
Mar 11 11:39:54	upsmon	8414	Poll UPS [TrippLite] failed - Driver not connected
Mar 11 11:39:49	upsmon	8414	Poll UPS [TrippLite] failed - Driver not connected
Mar 11 11:39:48	kernel		ugen1.2: <Tripp Lite ECO850LCD> at usbus1 (disconnected)
Mar 11 11:39:44	upsmon	8414	Poll UPS [TrippLite] failed - Driver not connected

After disconnecting / reconnecting USB cable and manual driver start, UPS is available again:

   0.002865	[D2] Initializing an USB-connected UPS with library libusb-1.0.0 (API: 0x1000102) (NUT subdriver name='USB communication driver (libusb 1.0)' ver='0.46')
   0.003797	[D2] Checking device 1 of 3 (0000/0000)
   0.004739	[D1] nut_libusb_open: invalid libusb bus number 0
   0.004878	[D2] - VendorID: 0000
   0.004897	[D2] - ProductID: 0000
   0.004909	[D2] - Manufacturer: Generic
   0.004920	[D2] - Product: XHCI root HUB
   0.004932	[D2] - Serial Number: unknown
   0.004943	[D2] - Bus: 000
   0.004953	[D2] - Bus Port: unknown
   0.004963	[D2] - Device: 001
   0.004974	[D2] - Device release number: 0100
   0.004985	[D2] Trying to match device
   0.005008	[D2] match_function_subdriver (non-SHUT mode): matching a device...
   0.005052	[D2] match_function_subdriver (non-SHUT mode): failed to match a subdriver to vendor and/or product ID
   0.005065	[D2] Device does not match - skipping
   0.005194	[D2] Checking device 2 of 3 (0000/0000)
   0.005421	[D1] nut_libusb_open: invalid libusb bus number 0
   0.005517	[D2] - VendorID: 0000
   0.005532	[D2] - ProductID: 0000
   0.005543	[D2] - Manufacturer: Marvell
   0.005554	[D2] - Product: EHCI root HUB
   0.005565	[D2] - Serial Number: unknown
   0.005576	[D2] - Bus: 001
   0.005586	[D2] - Bus Port: unknown
   0.005596	[D2] - Device: 001
   0.005607	[D2] - Device release number: 0100
   0.005617	[D2] Trying to match device
   0.005637	[D2] match_function_subdriver (non-SHUT mode): matching a device...
   0.005669	[D2] match_function_subdriver (non-SHUT mode): failed to match a subdriver to vendor and/or product ID
   0.005682	[D2] Device does not match - skipping
   0.005775	[D2] Checking device 3 of 3 (09AE/3024)
   0.018671	[D2] - VendorID: 09ae
   0.018723	[D2] - ProductID: 3024
   0.018736	[D2] - Manufacturer: Tripp Lite
   0.018748	[D2] - Product: ECO850LCD       
   0.018762	[D2] - Serial Number: 3216CV4BC87F303175
   0.018774	[D2] - Bus: 001
   0.018784	[D2] - Bus Port: 001
   0.018794	[D2] - Device: 002
   0.018805	[D2] - Device release number: 0002
   0.018816	[D2] Trying to match device
   0.018843	[D2] match_function_subdriver (non-SHUT mode): matching a device...
   0.018946	[D3] match_function_regex: matching a device...
   0.018967	[D2] Device matches

[dennypage]

@ghound said in NUT Package (2.8.1 and above):

72251.591030 [D2] Checking device 3 of 3 (09AE/3024)
72251.745371 [D1] nut_libusb_open get iManufacturer failed, retrying...
72251.895872 [D1] nut_libusb_open get iManufacturer failed, retrying...
72252.050367 [D1] nut_libusb_open get iManufacturer failed, retrying...
72252.205384 [D1] nut_libusb_open get iProduct failed, retrying...
72252.359364 [D1] nut_libusb_open get iProduct failed, retrying...
72252.513419 [D1] nut_libusb_open get iProduct failed, retrying...
72252.667482 [D1] nut_libusb_open get iSerialNumber failed, retrying...
72252.820954 [D1] nut_libusb_open get iSerialNumber failed, retrying...
72252.971389 [D1] nut_libusb_open get iSerialNumber failed, retrying...
72252.971473 [D2] - VendorID: 09ae
72252.971489 [D2] - ProductID: 3024
72252.971501 [D2] - Manufacturer: unknown
72252.971516 [D2] - Product: unknown
72252.971528 [D2] - Serial Number: unknown
72252.971540 [D2] - Bus: 001
72252.971551 [D2] - Bus Port: 001
72252.971563 [D2] - Device: 002
72252.971574 [D2] - Device release number: 0002
72252.971586 [D2] Trying to match device
72252.971609 [D2] match_function_subdriver (non-SHUT mode): matching a device...
72252.971645 [D3] match_function_regex: matching a device...
72252.971663 [D3] match_function_exact: matching a device...
72252.971678 [D2] match_function_exact: failed match of Vendor: (null) != Tripp Lite
72252.971690 [D2] Device does not match - skipping

@ghound said in NUT Package (2.8.1 and above):

0.005713 [D2] Checking device 3 of 3 (09AE/3024)
0.156567 [D1] nut_libusb_open get iManufacturer failed, retrying...
0.310568 [D1] nut_libusb_open get iManufacturer failed, retrying...
0.461572 [D1] nut_libusb_open get iManufacturer failed, retrying...
0.608445 [D1] nut_libusb_open get iProduct failed, retrying...
0.762543 [D1] nut_libusb_open get iProduct failed, retrying...
0.912962 [D1] nut_libusb_open get iProduct failed, retrying...
1.066550 [D1] nut_libusb_open get iSerialNumber failed, retrying...
1.218542 [D1] nut_libusb_open get iSerialNumber failed, retrying...
1.369116 [D1] nut_libusb_open get iSerialNumber failed, retrying...
1.369185 [D2] - VendorID: 09ae
1.369200 [D2] - ProductID: 3024
1.369214 [D2] - Manufacturer: unknown
1.369226 [D2] - Product: unknown
1.369238 [D2] - Serial Number: unknown
1.369249 [D2] - Bus: 001
1.369261 [D2] - Bus Port: 001
1.369273 [D2] - Device: 002
1.369285 [D2] - Device release number: 0002

For some reason we are loosing the ability to query device manufacturer and product. That it is persistent indicates that there is a problem in the kernel's USB drivers or the hardware itself. Unfortunately this is well outside of NUT's control.

Looking at your usbconfig output, the one thing I would recommend is to try a different USB port on the host. Something that connects to bus0 (generic XHCI) rather than bus1 (Marvell EHCI).

[ghound]

@dennypage said in NUT Package (2.8.1 and above):

For some reason we are loosing the ability to query device manufacturer and product. That it is persistent indicates that there is a problem in the kernel's USB drivers or the hardware itself. Unfortunately this is well outside of NUT's control.

Looking at your usbconfig output, the one thing I would recommend is to try a different USB port on the host. Something that connects to bus0 (generic XHCI) rather than bus1 (Marvell EHCI).

Thank you for looking at all the logs. This is a Netgate SG1100 box, so I connected to the USB3 port at ugen0.1: <Generic XHCI root HUB> at usbus0 – Bus:000 Bus Port: 002; vice my original connection to the USB2 port at ugen1.1: <Marvell EHCI root HUB> at usbus1 – Bus:001 Bus Port: 001. Again, connection was lost after around one day of operation. I do have another SG1100 I can try. Any other troubleshooting ideas? Thank you.

Log USB3 port connection:

   0.007864	[D2] Checking device 3 of 3 (09AE/3024)
   0.010883	[D2] - VendorID: 09ae
   0.010949	[D2] - ProductID: 3024
   0.010964	[D2] - Manufacturer: Tripp Lite
   0.010976	[D2] - Product: ECO850LCD       
   0.010987	[D2] - Serial Number: 3216CV4BC87F303175
   0.010998	[D2] - Bus: 000
   0.011009	[D2] - Bus Port: 002
   0.011019	[D2] - Device: 002
   0.011030	[D2] - Device release number: 0002
   0.011041	[D2] Trying to match device
   0.011062	[D2] match_function_subdriver (non-SHUT mode): matching a device...
   0.011164	[D3] match_function_regex: matching a device...
   0.011185	[D2] Device matches

[dennypage]

@ghound said in NUT Package (2.8.1 and above):

0.007864 [D2] Checking device 3 of 3 (09AE/3024)
0.010883 [D2] - VendorID: 09ae
0.010949 [D2] - ProductID: 3024
0.010964 [D2] - Manufacturer: Tripp Lite
0.010976 [D2] - Product: ECO850LCD
0.010987 [D2] - Serial Number: 3216CV4BC87F303175
0.010998 [D2] - Bus: 000
0.011009 [D2] - Bus Port: 002
0.011019 [D2] - Device: 002
0.011030 [D2] - Device release number: 0002

This looks correct (working). Manufacturer and Product are identifiable. If this subsequently fails, to confirm that the issue is the same as experienced on the other port, I would need to see what the driver says when it isn't working. Also interested to see the output of "usbconfig -v" when it isn't working.

[ghound]

@dennypage said in NUT Package (2.8.1 and above):

This looks correct (working). Manufacturer and Product are identifiable. If this subsequently fails, to confirm that the issue is the same as experienced on the other port, I would need to see what the driver says when it isn't working. Also interested to see the output of "usbconfig -v" when it isn't working.

Below is result of usbconfig -v when the connection is not working (on USB3 port):

[23.09.1-RELEASE][admin@router01.localr01]/dev/usb: usbconfig -v
ugen0.1: <Generic XHCI root HUB> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA)
ugen0.1.0: uhub0: <Generic XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1>

  bLength = 0x0012
  bDescriptorType = 0x0001
  bcdUSB = 0x0300
  bDeviceClass = 0x0009  <HUB>
  bDeviceSubClass = 0x0000
  bDeviceProtocol = 0x0003
  bMaxPacketSize0 = 0x0009
  idVendor = 0x0000
  idProduct = 0x0000
  bcdDevice = 0x0100
  iManufacturer = 0x0001  <Generic>
  iProduct = 0x0002  <XHCI root HUB>
  iSerialNumber = 0x0000  <no string>
  bNumConfigurations = 0x0001


 Configuration index 0

    bLength = 0x0009
    bDescriptorType = 0x0002
    wTotalLength = 0x001f
    bNumInterfaces = 0x0001
    bConfigurationValue = 0x0001
    iConfiguration = 0x0000  <no string>
    bmAttributes = 0x0040
    bMaxPower = 0x0000

    Interface 0
      bLength = 0x0009
      bDescriptorType = 0x0004
      bInterfaceNumber = 0x0000
      bAlternateSetting = 0x0000
      bNumEndpoints = 0x0001
      bInterfaceClass = 0x0009  <HUB>
      bInterfaceSubClass = 0x0000
      bInterfaceProtocol = 0x0000
      iInterface = 0x0000  <no string>

     Endpoint 0
        bLength = 0x0007
        bDescriptorType = 0x0005
        bEndpointAddress = 0x0081  <IN>
        bmAttributes = 0x0003  <INTERRUPT>
        wMaxPacketSize = 0x0002
        bInterval = 0x00ff
        bRefresh = 0x0000
        bSynchAddress = 0x0000

      Additional Descriptor

      bLength = 0x06
      bDescriptorType = 0x30
      bDescriptorSubType = 0x00
       RAW dump:
       0x00 | 0x06, 0x30, 0x00, 0x00, 0x00, 0x00




ugen1.1: <Marvell EHCI root HUB> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)
ugen1.1.0: uhub1: <Marvell EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1>

  bLength = 0x0012
  bDescriptorType = 0x0001
  bcdUSB = 0x0200
  bDeviceClass = 0x0009  <HUB>
  bDeviceSubClass = 0x0000
  bDeviceProtocol = 0x0001
  bMaxPacketSize0 = 0x0040
  idVendor = 0x0000
  idProduct = 0x0000
  bcdDevice = 0x0100
  iManufacturer = 0x0001  <Marvell>
  iProduct = 0x0002  <EHCI root HUB>
  iSerialNumber = 0x0000  <no string>
  bNumConfigurations = 0x0001


 Configuration index 0

    bLength = 0x0009
    bDescriptorType = 0x0002
    wTotalLength = 0x0019
    bNumInterfaces = 0x0001
    bConfigurationValue = 0x0001
    iConfiguration = 0x0000  <no string>
    bmAttributes = 0x0040
    bMaxPower = 0x0000

    Interface 0
      bLength = 0x0009
      bDescriptorType = 0x0004
      bInterfaceNumber = 0x0000
      bAlternateSetting = 0x0000
      bNumEndpoints = 0x0001
      bInterfaceClass = 0x0009  <HUB>
      bInterfaceSubClass = 0x0000
      bInterfaceProtocol = 0x0000
      iInterface = 0x0000  <no string>

     Endpoint 0
        bLength = 0x0007
        bDescriptorType = 0x0005
        bEndpointAddress = 0x0081  <IN>
        bmAttributes = 0x0003  <INTERRUPT>
        wMaxPacketSize = 0x0008
        bInterval = 0x00ff
        bRefresh = 0x0000
        bSynchAddress = 0x0000



ugen0.2: <Tripp Lite ECO850LCD> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (100mA)

  bLength = 0x0012
  bDescriptorType = 0x0001
  bcdUSB = 0x0200
  bDeviceClass = 0x0000  <Probed by interface class>
  bDeviceSubClass = 0x0000
  bDeviceProtocol = 0x0000
  bMaxPacketSize0 = 0x0040
  idVendor = 0x09ae
  idProduct = 0x3024
  bcdDevice = 0x0002
  iManufacturer = 0x0003  <retrieving string failed>
  iProduct = 0x0001  <retrieving string failed>
  iSerialNumber = 0x0005  <retrieving string failed>
  bNumConfigurations = 0x0001


 Configuration index 0

    bLength = 0x0009
    bDescriptorType = 0x0002
    wTotalLength = 0x0022
    bNumInterfaces = 0x0001
    bConfigurationValue = 0x0001
    iConfiguration = 0x0000  <no string>
    bmAttributes = 0x00a0
    bMaxPower = 0x0032

    Interface 0
      bLength = 0x0009
      bDescriptorType = 0x0004
      bInterfaceNumber = 0x0000
      bAlternateSetting = 0x0000
      bNumEndpoints = 0x0001
      bInterfaceClass = 0x0003  <HID device>
      bInterfaceSubClass = 0x0000
      bInterfaceProtocol = 0x0000
      iInterface = 0x0000  <no string>

      Additional Descriptor

      bLength = 0x09
      bDescriptorType = 0x21
      bDescriptorSubType = 0x11
       RAW dump:
       0x00 | 0x09, 0x21, 0x11, 0x01, 0x21, 0x01, 0x22, 0x75,
       0x08 | 0x03

     Endpoint 0
        bLength = 0x0007
        bDescriptorType = 0x0005
        bEndpointAddress = 0x0081  <IN>
        bmAttributes = 0x0003  <INTERRUPT>
        wMaxPacketSize = 0x0040
        bInterval = 0x00ff
        bRefresh = 0x0000
        bSynchAddress = 0x0000




Broadcast Message from root@router01.localr01
        (no tty) at 16:01 EDT...

UPS TrippLite is unavailable

[dennypage]

@ghound said in NUT Package (2.8.1 and above):

iManufacturer = 0x0003 <retrieving string failed>
iProduct = 0x0001 <retrieving string failed>
iSerialNumber = 0x0005 <retrieving string failed>

It was worth a shot.

Can you confirm that this behavior started following an upgrade of pfSense?

[ghound]

@dennypage said in NUT Package (2.8.1 and above):

Can you confirm that this behavior started following an upgrade of pfSense?

Behavior has persisted through several updates. (In fact, UPS has never not had this issue from its first day out of the box.)