miniUPnPd not working since 23.09 (worked in 23.05.1)
-
thank you very much for your help !
-
@PiAxel
The problem is back since update 23.09.1
everything seems to be working fine but neither my NAS nor any other network device can open a port via upnp. the games on my pc say that I am in strict NAT.
In pfsense stat upnp is empty.
I try with port=0 instead of 2189 but it didn't change anything
Tell me what you want to know about my pfsense.Please help me!
-
I have disabled STUN and there is no more message with "port forwarding is now disabled" but that still doesn't work.
-
@PiAxel said in miniUPnPd not working since 23.09 (worked in 23.05.1):
STUN: ext interface ix0 has now public IP address external ipv4 but firewall filters incoming connections set by miniunnpd
That implies you have something set that is preventing miniupnpd opening inbound ports somehow.
Do you have a custom block all rule on WAN or as Floating?
-
@stephenw10
No, I don't have any rule on WAN or as floating to block all -
Could be something upstream blocking it then. Try to send some traffic to your WAN from some external address and see if it arrives in a packet capture.
-
you have to add a rule in wan to allow...
## External Network ext_ifname=igc0 ext_perform_stun=yes ext_stun_host=198.100.144.121 ext_stun_port=3478 ## Internal Network listening_ip=bridge0 ipv6_disable=yes allow 1024-65535 192.168.1.0/24 1024-65535 deny 0-65535 0.0.0.0/0 0-65535 bitrate_down=512000 bitrate_up=1024000 ## UPnP Settings anchor=miniupnpd enable_natpmp=yes enable_upnp=yes secure_mode=yes min_lifetime=120 max_lifetime=86400 system_uptime=yes notify_interval=60 clean_ruleset_interval=600 packet_log=yes uuid=fb241e30-9c00-11ee-xxxxxxxxxxx serial=CA0A9DD5
