Netgate 2100 Customization of LEDs (Guide)
-
@wgstarks said in Netgate 2100 Customization of LEDs (Guide):
IMO
Great, no problem enjoy. I have one that turns purple when my wife has her work stuff on... royal purple means do not mess with firewall when she is working... haha
-
@wgstarks that you would need to ask an official Netgate rep about, I only have a 2100 so I can only use the directives that my model uses.
I wonder if you can also...
@stephenw10 Do you know what the LED intensity directive is on the 4200?
-
Only the first and third led's are blinking. I'm fairly sure the code is for all three right? I wonder if it's possible to test them?
-
@wgstarks does the 2nd glow red? The f2 directive might only work for led 0 and 2 test with the echo command
-
@JonathanLee said in Netgate 2100 Customization of LEDs (Guide):
@wgstarks does the 2nd glow red?
No but I see 0,1 and 2 in the code so wondering if it's a bad led.
-
@wgstarks check the file in /dev/led red 2
-
@JonathanLee said in Netgate 2100 Customization of LEDs (Guide):
@wgstarks check the file in /dev/led red 2
Can't open that file. the led directory is locked (555).
Box: SG-4200
-
-
@wgstarks can you cat the file?
-
@JonathanLee said in Netgate 2100 Customization of LEDs (Guide):
@wgstarks can you cat the file?
Operation not supported by device.
Box: SG-4200
-
@wgstarks look at the open source file on GitHub it’s all open source, git hub should be open non locked
-
@wgstarks someone made a Morse code LED messager you know the one you use the application on your phone for ? That is cool
<?php /* * led.inc * * part of pfSense (https://www.pfsense.org) * Copyright (c) 2009-2013 BSD Perimeter * Copyright (c) 2013-2016 Electric Sheep Fencing * Copyright (c) 2014-2024 Rubicon Communications, LLC (Netgate) * All rights reserved. * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ $led_root = "/dev/led/led"; /* * Send the control string to an LED */ function led_ctl($led, $str) { global $led_root; if (led_exists($led)) { exec("/bin/echo " . escapeshellarg($str) . " > {$led_root}{$led}"); return true; } return false; } /* * Blink an LED at set speed from 1-9 (1=Very Fast, 9=Very Slow) */ function led_blink($led, $speed = 0) { switch ($speed) { case "reallyfast": case "veryfast": $speed = 1; break; case "fast": $speed = 3; break; case "medium": $speed = 5; break; case "slow": $speed = 7; break; case "reallyslow": case "veryslow": $speed = 9; break; } if (is_numeric($speed) && ($speed > 0) && ($speed < 10)) { return led_ctl($led, "f{$speed}"); } return false; } /* * Blink an LED in a specific pattern * Letters A-J are on from 1/10s to 1s * Letters a-j are off from 1/10s to 1s */ function led_pattern($led, $pattern, $repeat = true) { /* End with a . to stop after one iteration. */ $end = $repeat ? "" : "."; return led_ctl($led, "s{$pattern}{$end}"); } /* * Encode a text message into morse code, and send it to an LED */ function led_morse($led, $message) { return led_ctl($led, "m" . str_to_morse($message)); } /* * Blink digits out on LED at 1/10s intervals * e.g 1=1 blink, 8=8 blinks * 0 is 10 pulses. * One second pause between digits. */ function led_digit($led, $digitstring) { $i = 0; $dstring = "d"; while ($i < strlen($digitstring)) { $thisdigit = substr($digitstring, $i++, 1); if (is_numeric($thisdigit)) { $dstring .= $thisdigit; } } led_ctl($led, $dstring); } /* * Turn an LED on */ function led_on($led) { led_ctl($led, "1"); } /* * Turn an LED off */ function led_off($led) { led_ctl($led, "0"); } /* * Find the number of LEDs present on the system. */ function led_count() { global $led_root; $count = 0; $leds = array(); if (is_dir(dirname($led_root))) { $leds = glob("{$led_root}*"); $count = count($leds); } return $count; } /* * Test to see if a given LED exists. */ function led_exists($led) { global $led_root; if (!is_numeric($led)) { return false; } return file_exists("{$led_root}{$led}"); } /* * Sweep across three LEDs in a K.I.T.T.-like way. */ function led_kitt() { if (led_count() != 3) { /* Wrong LED count for this to work, skip. */ return; } led_pattern(1, 'AaaaaA'); led_pattern(2, 'aAaaAa'); led_pattern(3, 'aaAAaa'); } /* * Custom pattern for assigning interfaces */ function led_assigninterfaces() { if (led_count() != 3) { /* Wrong LED count for this to work, skip. */ return; } led_pattern(1, 'AaaAaaaaaaaaaaaa'); led_pattern(2, 'aaaaaAaaAaaaaaaa'); led_pattern(3, 'aaaaaaaaaaAaaAaa'); } /* * Return the three LEDs to a standard setup (1=on, 2 and 3 = off) */ function led_normalize() { if (led_count() != 3) { /* Wrong LED count for this to work, skip. */ return; } led_on(1); led_off(2); led_off(3); } /* * Shut off ALL LEDs. */ function led_alloff() { if (led_count() != 3) { /* Wrong LED count for this to work, skip. */ return; } led_off(1); led_off(2); led_off(3); } /* * Translate a string to morse code. Characters not known to have a * valid morse code representation will be ignored. */ function str_to_morse($string) { $i = 0; $morsestring = ""; while ($i < strlen($string)) { $morsestring .= char_to_morse(substr($string, $i++, 1)) . " "; } return $morsestring . "\n"; } /* * Translate a single character to morse code. Characters not known * to have a valid morse code representation will be ignored. */ function char_to_morse($char) { switch (strtoupper($char)) { case "A": return ".-"; break; case "B": return "-..."; break; case "C": return "-.-."; break; case "D": return "-.."; break; case "E": return "."; break; case "F": return "..-."; break; case "G": return "--."; break; case "H": return "...."; break; case "I": return ".."; break; case "J": return ".---"; break; case "K": return "-.-"; break; case "L": return ".-.."; break; case "M": return "--"; break; case "N": return "-."; break; case "O": return "---"; break; case "P": return ".--."; break; case "Q": return "--.-"; break; case "R": return ".-."; break; case "S": return "..."; break; case "T": return "-"; break; case "U": return "..-"; break; case "V": return "...-"; break; case "W": return ".--"; break; case "X": return "-..-"; break; case "Y": return "-.--"; break; case "Z": return "--.."; break; case "0": return "-----"; break; case "1": return ".----"; break; case "2": return "..---"; break; case "3": return "...--"; break; case "4": return "....-"; break; case "5": return "....."; break; case "6": return "-...."; break; case "7": return "--..."; break; case "8": return "---.."; break; case "9": return "----."; break; case ".": return ".-.-.-"; break; case ",": return "--..--"; break; case "?": return "..--.."; break; case "'": return ".----."; break; case "!": return "-.-.--"; break; case "/": return "-..-."; break; case "(": return "-.--."; break; case ")": return "-.--.-"; break; case "&": return ".-..."; break; case ":": return "---..."; break; case ";": return "-.-.-."; break; case "=": return "-...-"; break; case "+": return ".-.-."; break; case "-": return "-....-"; break; case "_": return "..--.-"; break; case "$": return "...-..-"; break; case "@": return ".--.-."; break; case '"': return ".-..-."; break; default: return ""; break; } } ?> -
J JonathanLee referenced this topic on
