SG-2100-MAX System crashes with Compex use and 1gbps fiber
-
Nope that also rebooted
Traffic shaper never deleted it was still locked into the config I don't need it with one gig see it was still stuck at 6mb xbox is listed in easy shaper so once it started running it caused an error
could be this
-
Nope did it again. :(
-
x0: 0 x1: ffff00009c600000 ($d.6 + 999bb068) x2: 84 x3: 4 x4: 1 x5: ffff000097280840 ($d.6 + 9463b8a8) x6: 0 x0: 0 x7: 100 x1: ffff00009c600000 x8: ffff000000ad0114 ($d.6 + 999bb068) (generic_bs_r_4 + 0) x2: 80f4 x9: ffff000000acff6c x3: 4 (generic_bs_barrier + 0) x4: 1 x10: 88 x5: ffff000096fdd000 x11: 5c0 ($d.6 + 94398068) x12: 1 x13: 1 x6: 100 x14: 285f x7: ffff00009723684c x15: 2af8 ($d.6 + 945f18b4) x16: 2878 x17: 0 x8: ffff000000ad0114 x18: ffff000097280850 (generic_bs_r_4 + 0) ($d.6 + 9463b8b8) x9: ffff000000acff6c x19: ffff000096feb000 (generic_bs_barrier + 0) ($d.6 + 943a6068) x10: 3e8 x20: ffff00009c600000 x11: 10624dd3 ($d.6 + 999bb068) x12: 64 x21: 84 x13: 0 x22: ffff00000213aa80 x14: 186a0 (memmap_bus + 0) x15: 8003bed3 x23: ffff00009c236a74 x16: ffffa00025b97200 ($d.6 + 995f1adc) x24: ffffa000019efc80 x17: ffffa0000275019a x25: 0 x26: 0 x18: ffff0000403c0770 x27: ffff000002192e98 ($d.6 + 3d77b7d8) (Giant + 18) x19: ffff000096feb000 x28: ffffa000019efc80 ($d.6 + 943a6068) x20: ffff00009c600000 x29: ffff000097280850 ($d.6 + 999bb068) ($d.6 + 9463b8b8) x21: 80f4 sp: ffff000097280850 x22: ffff00000213aa80 lr: ffff000000167114 (memmap_bus + 0) (ath_hal_reg_read + cc) x23: ffff000096fef544 elr: ffff000000ad0118 ($d.6 + 943aa5ac) (generic_bs_r_4 + 4) x24: ffff000096feb000spsr: 45 ($d.6 + 943a6068) far: ffff00009c600084 x25: ffff000096fef544 ($d.6 + 999bb0ec) ($d.6 + 943aa5ac) x26: 0 x27: 7530 x28: 754a x29: ffff0000403c0770 ($d.6 + 3d77b7d8) sp: ffff0000403c0770 lr: ffff000000167114 (ath_hal_reg_read + cc) elr: ffff000000ad0118 (generic_bs_r_4 + 4) spsr: 20000045 far: ffff00009c6080f4 ($d.6 + 999c315c) timeout stopping cpus panic: Unhandled EL1 external data abort cpuid = 1 time = 1714888984 KDB: enter: panic [ thread pid 12 tid 100070 ] Stopped at kdb_enter+0x44: undefined f907c27f db:0:kdb.enter.default> textdump set textdump set db:0:kdb.enter.default> capture on db:0:kdb.enter.default> run pfs db:1:pfs> bt Tracing pid 12 tid 100070 td 0xffff00009c22c600 db_trace_self() at db_trace_self db_stack_trace() at db_stack_trace+0x11c db_command() at db_command+0x358 db_script_exec() at db_script_exec+0x1a4 db_command() at db_command+0x358 db_script_exec() at db_script_exec+0x1a4 db_script_kdbenter() at db_script_kdbenter+0x58 db_trap() at db_trap+0xf4 kdb_trap() at kdb_trap+0x284 handle_el1h_sync() at handle_el1h_sync+0x10 --- exception, esr 0 $d.6() at 0xffff000097000a63 db:1:pfs> show registers spsr 0x600000c5 x0 0x12 x1 0xa x2 0x4 x3 0xa x4 0xffff000000ad0244 generic_bs_w_4 x5 0x50 x6 0xffff00000067adec kvprintf+0x470 x7 0xd5 x8 0x1 x9 0x9f067a1c30d67fd2 x10 0xffff0000023d9000 nfsheur+0x5480 x11 0xfefefefefefefeff x12 0xffff000097000a63 x13 0xfeff00ff0100 x14 0 x15 0 x16 0 x17 0 x18 0xffff000097280560 x19 0xffff000002433000 epoch_array+0x1280 x20 0xffff000002401eb0 vpanic.buf x21 0xffff00009c22c600 x22 0 x23 0xffff000002401000 proc_id_reapmap+0x2870 x24 0xffffa000019efc80 x25 0 x26 0 x27 0xffff000002192e98 Giant+0x18 x28 0xffffa000019efc80 x29 0xffff000097280560 lr 0xffff000000673a68 kdb_enter+0x40 elr 0xffff000000673a6c kdb_enter+0x44 sp 0xffff000097280560 kdb_enter+0x44: undefined f907c27f db:1:pfs> show pcpu cpuid = 1 dynamic pcpu = 0x3eb20180 curthread = 0xffff00009c22c600: pid 12 tid 100070 critnest 1 "pcib0,0: ath0" curpcb = 0xffff000097280b40 fpcurthread = 0xffff0000e1a86200: pid 29607 "snort" idlethread = 0xffff000040ebb800: tid 100004 "idle: cpu1" curvnet = 0 db:1:pfs> run lockinfo db:2:lockinfo> show locks No such command; use "help" to list available commands db:2:lockinfo> show alllocks No such command; use "help" to list available commands db:2:lockinfo> show lockedvnods Locked vnodes db:1:pfs> acttrace Tracing command clock pid 2 tid 100029 td 0xffff000096fb5c00 (CPU 0) sched_switch() at sched_switch+0x868 mi_switch() at mi_switch+0x100 version() at version+0x12c Tracing command intr pid 12 tid 100070 td 0xffff00009c22c600 (CPU 1) db_trace_self() at db_trace_self _db_stack_trace_all() at _db_stack_trace_all+0xe8 db_command() at db_command+0x358 db_script_exec() at db_script_exec+0x1a4 db_command() at db_command+0x358 db_script_exec() at db_script_exec+0x1a4 db_script_kdbenter() at db_script_kdbenter+0x58 db_trap() at db_trap+0xf4 kdb_trap() at kdb_trap+0x284 handle_el1h_sync() at handle_el1h_sync+0x10 --- exception, esr 0 $d.6() at 0xffff000097000a63 db:1:pfs> ps pid ppid pgrp uid state wmesg wchan cmd 80015 92122 412 0 S nanslp 0xffff00000240378d sleep 77724 44890 26 0 S nanslp 0xffff00000240378c sleep 80274 87627 86665 100 S sbwait 0xffff0000df9e844c perl 54117 87627 86665 100 S sbwait 0xffff0000dfa4e8cc perl 53941 87627 86665 100 S sbwait 0xffff0000df9e6d4c perl 18551 18369 17397 0 S piperd 0xffff0000e14be998 sh 18369 17397 17397 0 S wait 0xffffa0008ee11540 sh 18181 17397 17397 0 S (threaded) sshg-blocker 100326 S piperd 0xffff0000e14bd000 sshg-blocker 100376 S nanslp 0xffff00000240378c sshg-blocker 18028 17397 17397 0 S piperd 0xffff0000e14be110 sshg-parser 17703 17397 17397 0 S piperd 0xffff0000e14666c0 cat 17397 47272 17397 0 Ss wait 0xffffa00099a58000 sh 17327 1 17327 0 Ss+ ttyin 0xffffa00000e604b0 getty 92236 87627 86665 100 S sbwait 0xffff0000dfa5c8cc squidGuard 92108 87627 86665 100 S sbwait 0xffff0000dfa5ed4c squidGuard 91847 87627 86665 100 S sbwait 0xffff0000dfa5db4c squidGuard 91544 87627 86665 100 S sbwait 0xffff0000df9edb4c squidGuard 29607 1 29607 0 Rs (threaded) snort 100336 RunQ snort 100374 S nanslp 0xffff00000240378d snort 100375 S sbwait 0xffff0000dfa6844c snort 57228 87627 86665 100 S select 0xffffa00059604dc0 pinger 56920 87627 86665 100 S sbwait 0xffff0000dfa0cd4c perl 56138 87627 86665 100 S sbwait 0xffff0000df9f4d4c perl 54293 87627 86665 100 S sbwait 0xffff0000dfa168cc perl 51257 87627 86665 100 S sbwait 0xffff0000dfa05b4c perl 50784 87627 86665 100 S sbwait 0xffff0000dfa6bb4c perl 49572 87627 86665 100 S sbwait 0xffff0000df9f56cc squidGuard 48859 87627 86665 100 S sbwait 0xffff0000df9f5fcc squidGuard u47486 87627c86665 n10: USha d dsbLa txt0rfalfdata abfr8c squidGuime psqui=Gu d▒TIM-1.0 WTMI-devel-1.0.0-1115f12 WTMI: system early-init SVC REV: 5, CPU VDD voltage: 1.225V -
Enabled Swap and it stopped crashing....
Ok so stress testing it now with full device use everything in the house would not reboot, so I added ClamAV to it and finally got swap use out of it and still no reboots.
I think that resolved my reboots. high speed SSDs are amazing
-
@stephenw10 thanks for working this issue with me.
Ok I got it to crash again. However, I have no report that went to /var/crash nothing is listed I got the swap working and everything . Is there something else I need to make the /var/crash reports generate?
-
Hmm, I wonder if saving crash data is not enabled on the 2100. Did you install that using the Net Installer or the legacy installer?
-
Ah, OK I see. Testing....
-
@stephenw10 I installed it from the image that TAC sent me over USB it was all set up already in the image how can I manually enable that?
-
What do you see in /etc/ddb.conf ?
-
# $FreeBSD$ # # This file is read when going to multi-user and its contents piped thru # ``ddb'' to define debugging scripts. # # see ``man 4 ddb'' and ``man 8 ddb'' for details. # script lockinfo=show locks; show alllocks; show lockedvnods # kdb.enter.panic panic(9) was called. script kdb.enter.panic=textdump set; capture on; run lockinfo; show pcpu; bt; ps; alltrace; capture off; textdump dump; reset # kdb.enter.witness witness(4) detected a locking error. script kdb.enter.witness=run lockinfo -
/etc/rc.conf shows
"THIS FILE DOES NOTHING, DO NOT MAKE CHANGES HERE"
-
Yeah, there's a problem here. We are digging...
-
@stephenw10 Thanks, what is good news is the new 2100-MAX ships with 128GB SSD over the 32GB SSD in 2019.
So essentially the 2100 can use the SWAP now off the SSD. Again I have it enabled running it works, I am running clamAV and it uses 3% has been running for a hour or so now, as soon as I load the wifi card I get system cashes, but no crash data. It is like there is no linker file pointing to that folder or something. Good news is the swap functions very well I no longer have to disable clamAV when Snort updates it just works without killing snort. Historically it would kill the snort process each and every update of the database. This time it started to use the SWAP when it ran out of memory. So it does function as designed with memory exhaustions. It has to be something simple like pointing a linker file -
Yeah OK it's because manually editing the fstab it's easy to omit the required new-line character at the end of the additional line. That then trips up the rc.dumpon script so it never gets enabled at boot.
So make sure your fstab looks like:
[24.03-RELEASE][root@2100-3.stevew.lan]/root: cat /etc/fstab # Device Mountpoint FStype Options Dump Pass# /dev/msdosfs/EFISYS /boot/efi msdosfs rw,noatime,noauto 0 0 /dev/msdosfs/DTBFAT0 /boot/msdos msdosfs rw,noatime,noauto 0 0 /dev/ada0s3b none swap sw 0 0 [24.03-RELEASE][root@2100-3.stevew.lan]/root:And not:
24.03-RELEASE][root@2100-3.stevew.lan]/root: cat /etc/fstab # Device Mountpoint FStype Options Dump Pass# /dev/msdosfs/EFISYS /boot/efi msdosfs rw,noatime,noauto 0 0 /dev/msdosfs/DTBFAT0 /boot/msdos msdosfs rw,noatime,noauto 0 0 /dev/ada0s3b none swap sw 0 0[24.03-RELEASE][root@2100-3.stevew.lan]/root:Then run:
[24.03-RELEASE][root@2100-3.stevew.lan]/root: /etc/rc.dumpon Using /dev/ada0s3b for dump device.Or reboot.
You should then see that enabled:
[24.03-RELEASE][root@2100-3.stevew.lan]/root: dumpon -l ada0s3bIf you then trigger a panic you should see a crash report. You can manually trigger one as a test using:
sysctl debug.kdb.panic=1 -
Thank you that fixed it!!
Amazing to see this run on the SG-2100 with that 1 million hr SSD with self leveling it should be fine to use a swap area..
I manually triggered the crash and it works now.
So it was missing a carriage return is all it was to cause that issue weird one.
Does a Redmine need to be open to enable this for other 2100-MAX users that have the large SSD installed? It should be auto enabled right?
I would upvote you but I ran out of upvotes today I used them all on your posts helping me I will upvote it tomorrow.
-
Yup, that was puzzling! (thanks @jimp) But good to know.
Lets see if all your crashes are the same now.
-
@stephenw10 I have to active that card and start running everything in the house again hold on testing now....
-
This post is deleted! -
@stephenw10 The second reboot gave me a good report it looks to be the same what part do you need to see from it?
Filename: /var/crash/info.0 Dump header from device: /dev/ada0s3b Architecture: aarch64 Architecture Version: 4 Dump Length: 154624 Blocksize: 512 Compression: none Dumptime: 2024-05-07 15:05:11 -0700 Hostname: Lee_Family.home.arpa Magic: FreeBSD Text Dump Version String: FreeBSD 14.0-CURRENT #1 plus-RELENG_23_05_1-n256108-459fc493a87: Wed Jun 28 04:25:15 UTC 2023 root@freebsd:/var/jenkins/workspace/pfSense-Plus-snapshots-23_05_1-main/obj/aarch64/0P4W6joa Panic String: Unhandled EL1 external data abort Dump Parity: 3539364660 Bounds: 0 Dump Status: good > run pfs db:1:pfs> bt Tracing pid 12 tid 100070 td 0xffff00009c22c600 db_trace_self() at db_trace_self db_stack_trace() at db_stack_trace+0x11c db_command() at db_command+0x358 db_script_exec() at db_script_exec+0x1a4 db_command() at db_command+0x358 db_script_exec() at db_script_exec+0x1a4 db_script_kdbenter() at db_script_kdbenter+0x58 db_trap() at db_trap+0xf4 kdb_trap() at kdb_trap+0x284 handle_el1h_sync() at handle_el1h_sync+0x10 --- exception, esr 0 $d.6() at 0xffff000097000a63 db:1:pfs> show registers spsr 0x600000c5 x0 0x12 x1 0xa x2 0x4 x3 0xa x4 0xffff000000ad0244 generic_bs_w_4 x5 0x50 x6 0xffff00000067adec kvprintf+0x470 x7 0xd5 x8 0x1 x9 0x36c353fc715cf827 x10 0xffff0000023d9000 nfsheur+0x5480 x11 0xfefefefefefefeff x12 0xffff000097000a63 x13 0xfeff00ff0100 x14 0 x15 0 x16 0 x17 0 x18 0xffff000097280590 x19 0xffff000002433000 epoch_array+0x1280 x20 0xffff000002401eb0 vpanic.buf x21 0xffff00009c22c600 x22 0 x23 0xffff000002401000 proc_id_reapmap+0x2870 x24 0xffffa000019efc80 x25 0xffff000002191000 version+0x130 x26 0 x27 0xffff000002192e98 Giant+0x18 x28 0xffffa000019efc80 x29 0xffff000097280590 lr 0xffff000000673a68 kdb_enter+0x40 elr 0xffff000000673a6c kdb_enter+0x44 sp 0xffff000097280590 kdb_enter+0x44: undefined f907c27f db:1:pfs> show pcpu cpuid = 1 dynamic pcpu = 0x3eb20180 curthread = 0xffff00009c22c600: pid 12 tid 100070 critnest 1 "pcib0,0: ath0" curpcb = 0xffff000097280b40 fpcurthread = 0xffff0000e2539000: pid 98459 "snort" idlethread = 0xffff000040ebb800: tid 100004 "idle: cpu1" curvnet = 0 db:1:pfs> run lockinfo db:2:lockinfo> show locks No such command; use "help" to list available commands db:2:lockinfo> show alllocks No such command; use "help" to list available commands db:2:lockinfo> show lockedvnods Locked vnodes db:1:pfs> acttrace Tracing command intr pid 12 tid 100031 td 0xffff000096fb5000 (CPU 0) ipi_stop() at ipi_stop+0x30 arm_gic_v3_intr() at arm_gic_v3_intr+0xe8 intr_irq_handler() at intr_irq_handler+0x7c handle_el1h_irq() at handle_el1h_irq+0xc --- interrupt Tracing command intr pid 12 tid 100070 td 0xffff00009c22c600 (CPU 1) db_trace_self() at db_trace_self _db_stack_trace_all() at _db_stack_trace_all+0xe8 db_command() at db_command+0x358 db_script_exec() at db_script_exec+0x1a4 db_command() at db_command+0x358 db_script_exec() at db_script_exec+0x1a4 db_script_kdbenter() at db_script_kdbenter+0x58 db_trap() at db_trap+0xf4 kdb_trap() at kdb_trap+0x284 handle_el1h_sync() at handle_el1h_sync+0x10 --- exception, esr 0 $d.6() at 0xffff000097000a63 db:1:pfs> ps -
<118> Starting /usr/local/etc/rc.d/sqp_monitor.sh...done. <118>Netgate pfSense Plus 23.05.1-RELEASE arm64 Wed Jun 28 03:57:42 UTC 2023 <118>Bootup complete <6>mvneta0: promiscuous mode enabled ath0: ath_rx_pkt: rs_antenna > 7 (8542452) ath0: ath_rx_pkt: rs_antenna > 7 (8542452) ath0: ath_rx_pkt: rs_antenna > 7 (8542452) ath0: ath_rx_proc: kickpcu; handled 413 packets x0: 0 x1: ffff00009c600000 ($d.6 + 999bb068) x2: 4038 x3: 4 x4: 1 x5: ffff000097280840 ($d.6 + 9463b8a8) x6: 0 x7: 200 x8: ffff000000ad0114 (generic_bs_r_4 + 0) x9: ffff000000acff6c (generic_bs_barrier + 0) x10: 0 x11: 0 x12: 1 x13: 1 x14: 286b x15: 2af8 x16: 2711 x17: 0 x18: ffff000097280880 ($d.6 + 9463b8e8) x19: ffff000096feb000 ($d.6 + 943a6068) x20: ffff00009c600000 ($d.6 + 999bb068) x21: 4038 x22: ffff00000213aa80 (memmap_bus + 0) x23: ffff00009c236a74 ($d.6 + 995f1adc) x24: ffffa000019efc80 x25: ffff000002191000 (version + 130) x26: 0 x27: ffff000002192e98 (Giant + 18) x28: ffffa000019efc80 x29: ffff000097280880 ($d.6 + 9463b8e8) sp: ffff000097280880 lr: ffff000000167114 (ath_hal_reg_read + cc) elr: ffff000000ad0118 (generic_bs_r_4 + 4) spsr: 20000045 far: ffff00009c604038 ($d.6 + 999bf0a0) panic: Unhandled EL1 external data abort cpuid = 1 time = 1715119511 KDB: enter: panic
