6100 failing after trying to upgrade from 23.09.01-RELEASE to 24.xx
-
Hmm, well if you can reach a prompt and get network connectivity you could try uploading an image and writing it to the eMMC. Otherwise I thing writing the SSD in something else might be the only option.
-
C cedrictang referenced this topic on
-
wow so I am real chuffed!
bought a ryzen mini pc and replace the original nvme with the stick from the 6100. booted off the usb. initially the system will boot until a point where it will just halt. it didn't recognised the 2 realtek nics. plugged in a usb network port and the whole thing then booted up correctly and i managed to reinstall the image.
reinstalled the stick back into the 6100 and connected to the console via putty and micro-usb and reconfigured the WAN/LAN and managed to get into the web interface. took about 1.5 hours of figuring out the various dead-ends.
-
Nice! So it really is just the USB port/bus that failed.
-
well yes that. Plus ultimately the upgrade from 23.09 to 24.xx killed the OS which bricked the device.
