1 WAN interface, 3 LAN interfaces, OpenVPN allow communication to all networks

[jg8000]

@stephenw10

Ok, I'm confused now.

Looks as if rules are being loaded without error.

This is my Outbound rule

[stephenw10]

Yet you still see the states with no NAT applied?

[jg8000]

@stephenw10

I still can’t get it to work on my test setup, but I was able to solve the production issue.

It was the Cisco switches breaking comms between the devices and the firewall. No fix yet, other than to use a dumb switch. The traffic flowed just fine right away, I was able to provision the nodes with no issue.

I’m still seeing some weird timeouts with the VPN, could be a timeout issue, not sure

Thanks so much for all of your help

[stephenw10]

Ah, well that's a much better solution. Adding NAT in there is always a workaround.

That NAT looks like it should match and be applied though.