Captive portal behind squid?

eri--

You cannot on 1.2.3 or previous versions.

periko

Thanks all for your great info, appreciated.

"I like squid a lot but it feels like it should be run on a seperate machine to fully work."

I had seen this before, maybe 2.0 will have a better squid performance, but this the time let us know.

Thanks my friends again!!!

0tt0

@periko:

I had seen this before, maybe 2.0 will have a better squid performance, but this the time let us know.

Just a note, I have squid 2.7.7 running nicely again, it's just CP that doesn't work and now it doesn't matter whether or not squid is active on the same interface or not, CP is dead any way :(
Apart from now and then stopped logging after reboot (earlier versions) I haven't really had any hard issues with squid itself.

Cheers,

XIII

I am able to do it with 1.2.2

mikesamo

with transparent squid and are you using squidguard ?

XIII

just squid, no squidguard

CarlMGregory

@ermal:

You cannot on 1.2.3 or previous versions.

Hu? I use squid, squidGuard and CaptivePortal on 1.2.3-RELEASE. They all work fine for me.

heitor.lessa

@CarlMGregory:

@ermal:

You cannot on 1.2.3 or previous versions.

Hu? I use squid, squidGuard and CaptivePortal on 1.2.3-RELEASE. They all work fine for me.

Periko,

I´m running squid (transparent) w/ squidGuard and CP w/ Radius too, everything works fine.

Att.
Heitor Lessa
Blog -> http://tinodiaadia.wordpress.com

rhy7s

@Heitor:

Periko,

I´m running squid (transparent) w/ squidGuard and CP w/ Radius too, everything works fine.

Att.
Heitor Lessa
Blog -> http://tinodiaadia.wordpress.com

That's cool, you haven't noticed any delays like http://forum.pfsense.org/index.php/topic,11105.0.html?

heitor.lessa

@rhy7s:

@Heitor:

Periko,

I´m running squid (transparent) w/ squidGuard and CP w/ Radius too, everything works fine.

Att.
Heitor Lessa
Blog -> http://tinodiaadia.wordpress.com

This happened w/ I was using 1.2.2 Version.. but when I upgrade to 1.2.3-RELEASE works fine.

But.. I use CP + RADIUS w/ proxy transparent, following this tutorial -> http://files.pfsense.org/tutorials/cp_config/radius_win2k3.htm

Att.
Heitor Lessa
Blog -> http://tinodiaadia.wordpress.com
That's cool, you haven't noticed any delays like http://forum.pfsense.org/index.php/topic,11105.0.html?