ATT Internet AIr
-
Check DNS.
Test if you can ping by IP from clients or from pfSense itself in the failed state.
-
@stephenw10
I was able to ping 8..8.8.8
but not google.comI reached chase.com when I put in the ip address
That said I could figure out how to fix it after trying DNS changes I'll send pics of my DNS pages
That weird public IP in my DNS settings is from ATT and the Internet Air says that is their DNS server
-
Couldn't figure out how ot edit post
I COULDN'T figure out how to fix the probable DNS issue -- so I kept floundering with other things - none of which worked
-
You have 'use local DNS' set anyway though so it will try to resolve directly unless you have Unbound in forwarding mode?
Are you policy routing traffic from the LAN clients via the gateway group?
Were you testing from LAN clients or from pfSense itself? Or both?
-
I don't think I am using forwarding
And I am not policy routing that I am aware ofMy problem is I am one of those huge supporters of pfsense but go through issues and get things set with help of people like you -- then I don't touch things for 6 months. Sorry - but thanks for patience!
I did test from both and as I recall during my after midnight late night testing the results were the same from both pfsense and on a device on the LAN
Are thre any other settings or log files I can send to help better? I read log files until 2 am hoping to see something that helped
-
PROBABLY NOT GOOD IDEA TO EXPOSE THE GUI TO THE WWW
but its your call
-
-
@flat4 did I not gray/red out anything of importance ??? did I miss something important?
-
Check the DNS resolver settings, that can also be set in forwarding mode. It resolves directly by default though.
Try resolving something in the pfSense GUI in Diag > DNS Lookup.
Note what servers are responding in the failed WAN state. -
@stephenw10
I will check the failed state DNS resolution (from pfsense) later today when I am back on siteBut here are screenshots of the DNS Resolver. Should I just disable DNS Resolver ?
-
No I would expect that to work. It is in resolving mode and set to use 'all' interfaces for outgoing queries. So it should switch to use the WAN when the system default gateway changes.
-
@stephenw10
So do I not have the gateway for the Internet Air established correctly - ?Would there be any benefit for deleting the "interface" (it used to be a Suddenlink cable modem , before I added the Frontier fiber internet as WAN2)? And then recreating the interface and starting all over ??
I'm at a loss ... -
Unclear at this point. You need to run some DNS testing in the failed state to ind out what's actually failing.
-
@stephenw10
Ok so I got on-siteLooks like I can ping and access routes from pfsense and on the LAN
but I can NOT resolve DNS from either pFsense or the LANIt just hangs when trying to resolve a DNS
What can I post that will help to resolve this frustrating issue ??
THANKS
-
This post is deleted! -
These were attempts to ping form pfsense while in failed state - one to numerical address the other to name