Netgate Device ID changing on power loss
-
Hmm, it didn't disable it?
Do you see the line as expected in /boot/loader.conf.local?
Try running:
usbconfig dump_device_descThat might show you what that device actually is.
-
@provels Not intentionally, asrock has no options for it other than this network bond config which isn't the same thing.
@stephenw10 Yep, I can see it there in the file, and nope it didn't disable it.
This is the output of that command:
I don't see it there... (yet its still in the system)
/root: usbconfig dump_device_desc ugen1.1: <AMD XHCI root HUB> at usbus1, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SA VE (0mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0300 bDeviceClass = 0x0009 <HUB> bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0003 bMaxPacketSize0 = 0x0009 idVendor = 0x0000 idProduct = 0x0000 bcdDevice = 0x0100 iManufacturer = 0x0001 <AMD> iProduct = 0x0002 <XHCI root HUB> iSerialNumber = 0x0000 <no string> bNumConfigurations = 0x0001 ugen0.1: <AMD XHCI root HUB> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SA VE (0mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0300 bDeviceClass = 0x0009 <HUB> bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0003 bMaxPacketSize0 = 0x0009 idVendor = 0x0000 idProduct = 0x0000 bcdDevice = 0x0100 iManufacturer = 0x0001 <AMD> iProduct = 0x0002 <XHCI root HUB> iSerialNumber = 0x0000 <no string> bNumConfigurations = 0x0001 ugen2.1: <AMD XHCI root HUB> at usbus2, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SA VE (0mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0300 bDeviceClass = 0x0009 <HUB> bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0003 bMaxPacketSize0 = 0x0009 idVendor = 0x0000 idProduct = 0x0000 bcdDevice = 0x0100 iManufacturer = 0x0001 <AMD> iProduct = 0x0002 <XHCI root HUB> iSerialNumber = 0x0000 <no string> bNumConfigurations = 0x0001 ugen0.2: <American Megatrends Inc. Virtual Hub> at usbus0, cfg=0 md=HOST spd=HIG H (480Mbps) pwr=SAVE (100mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0200 bDeviceClass = 0x0009 <HUB> bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0001 bMaxPacketSize0 = 0x0040 idVendor = 0x046b idProduct = 0xff01 bcdDevice = 0x0100 iManufacturer = 0x0001 <American Megatrends Inc.> iProduct = 0x0002 <Virtual Hub> iSerialNumber = 0x0003 <serial> bNumConfigurations = 0x0001 ugen0.3: <American Megatrends Inc. Virtual Ethernet> at usbus0, cfg=0 md=HOST sp d=HIGH (480Mbps) pwr=ON (0mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0200 bDeviceClass = 0x0002 <Communication device> bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0040 idVendor = 0x046b idProduct = 0xffb0 bcdDevice = 0x0100 iManufacturer = 0x0001 <American Megatrends Inc.> iProduct = 0x0002 <Virtual Ethernet> iSerialNumber = 0x0003 <1234567890> bNumConfigurations = 0x0002 ugen0.4: <American Megatrends Inc. Virtual Keyboard and Mouse> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (0mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0110 bDeviceClass = 0x0000 <Probed by interface class> bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0008 idVendor = 0x046b idProduct = 0xff10 bcdDevice = 0x0100 iManufacturer = 0x0001 <American Megatrends Inc.> iProduct = 0x0002 <Virtual Keyboard and Mouse> iSerialNumber = 0x0000 <no string> bNumConfigurations = 0x0001 ugen0.5: <American Megatrends Inc. Virtual Cdrom Device> at usbus0, cfg=0 md=HOS T spd=HIGH (480Mbps) pwr=ON (0mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0200 bDeviceClass = 0x0000 <Probed by interface class> bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0040 idVendor = 0x046b idProduct = 0xff20 bcdDevice = 0x0100 iManufacturer = 0x0001 <American Megatrends Inc.> iProduct = 0x0002 <Virtual Cdrom Device> iSerialNumber = 0x0003 <AAAABBBBCCCC1> bNumConfigurations = 0x0001 ugen0.6: <American Megatrends Inc. Virtual HardDisk Device> at usbus0, cfg=0 md= HOST spd=HIGH (480Mbps) pwr=ON (0mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0200 bDeviceClass = 0x0000 <Probed by interface class> bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0040 idVendor = 0x046b idProduct = 0xff31 bcdDevice = 0x0100 iManufacturer = 0x0001 <American Megatrends Inc.> iProduct = 0x0002 <Virtual HardDisk Device> iSerialNumber = 0x0003 <AAAABBBBCCCC3> bNumConfigurations = 0x0001EDIT: Nevermind, here it is:
ugen0.3: <American Megatrends Inc. Virtual Ethernet> at usbus0, cfg=0 md=HOST sp d=HIGH (480Mbps) pwr=ON (0mA) -
Yup so it's a virtual device. If there's nothing in the BIOS then maybe something in the IPMI setup?
How does it appear in the boot log when it attaches? You might need to try disabling cdce0 instead. If that's how it appears.
-
@stephenw10 Nothing in both places. Only things I can disable are the virtual media devices & KBM emulation. No mention of any virtual network adapters at all.
This is all thats mentioned of it in the boot log:
uhub2: 6 ports with 6 removable, self powered uhub1: 6 ports with 6 removable, self powered uhub0: 22 ports with 22 removable, self powered Root mount waiting for: usbus0 ugen0.2: <American Megatrends Inc. Virtual Hub> at usbus0 uhub3 on uhub0 uhub3: <7-port Hub> on usbus0 uhub3: 5 ports with 5 removable, self powered Root mount waiting for: usbus0 ugen0.3: <American Megatrends Inc. Virtual Ethernet> at usbus0 Root mount waiting for: usbus0 ugen0.4: <American Megatrends Inc. Virtual Keyboard and Mouse> at usbus0 ukbd0 on uhub3 ukbd0: <Keyboard Interface> on usbus0 kbd2 at ukbd0 -
-
It must list the device and the driver attaching to it in the boot log. Something like:
ugen0.3: <Realtek USB 10/100/1G/2.5G LAN> at usbus0 cdce0 on uhub0 cdce0: <CDC Communications Control> on usbus0 ue0: <USB Ethernet> on cdce0 ue0: Ethernet address: 00:e0:81:21:78:eaAnd if it does appear like that try adding to loader.conf.local:
hint.cdce.0.disabled="1" -
@Bob-Dig said in Netgate Device ID changing on power loss:
@n1ck31 Maybe try disabling the BMC with a jumper and see if this helps.
Although that probably will solve the issue, that negates the scalped price I paid for this board originally - if i were to go this route I'd just buy a regular consumer board and swap it out.
-
@stephenw10 said in Netgate Device ID changing on power loss:
It must list the device and the driver attaching to it in the boot log. Something like:
ugen0.3: <Realtek USB 10/100/1G/2.5G LAN> at usbus0 cdce0 on uhub0 cdce0: <CDC Communications Control> on usbus0 ue0: <USB Ethernet> on cdce0 ue0: Ethernet address: 00:e0:81:21:78:eaAnd if it does appear like that try adding to loader.conf.local:
hint.cdce.0.disabled="1"Here's the full log file
It seems that it's usbus0 on xhci0, so maybe disabling xhci0?
Copyright (c) 1992-2023 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 14.0-CURRENT amd64 1400094 #1 RELENG_2_7_2-n255948-8d2b56da39c: Wed Dec 6 20:45:47 UTC 2023 root@freebsd:/var/jenkins/workspace/pfSense-CE-snapshots-2_7_2-main/obj/amd64/StdASW5b/var/jenkins/workspace/pfSense-CE-snapshots-2_7_2-main/sources/FreeBSD-src-RELENG_2_7_2/amd64.amd64/sys/pfSense amd64 FreeBSD clang version 16.0.6 (https://github.com/llvm/llvm-project.git llvmorg-16.0.6-0-g7cbf1a259152) VT(efifb): resolution 1024x768 CPU: AMD Ryzen 5 5600G with Radeon Graphics (3900.23-MHz K8-class CPU) Origin="AuthenticAMD" Id=0xa50f00 Family=0x19 Model=0x50 Stepping=0 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x7ef8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX> Structured Extended Features=0x219c97a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA> Structured Extended Features2=0x40069c<UMIP,PKU,OSPKE,VAES,VPCLMULQDQ,RDPID> Structured Extended Features3=0x10<FSRM> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> AMD Extended Feature Extensions ID EBX=0x191ef657<CLZERO,IRPerf,XSaveErPtr,RDPRU,WBNOINVD,IBPB,IBRS,STIBP,STIBP_ALWAYSON,PREFER_IBRS,SSBD> SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 15924834304 (15187 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I > FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" random: unblocking device. ioapic0 <Version 2.1> irqs 0-23 ioapic1 <Version 2.1> irqs 24-55 Launching APs: 1 3 2 10 7 11 6 8 9 4 5 TCP_ratelimit: Is now initialized wlan: mac acl policy registered random: entropy device external interface kbd1 at kbdmux0 WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. netgate0: <unknown hardware> efirtc0: <EFI Realtime Clock> efirtc0: registered as a time-of-day clock, resolution 1.000000s smbios0: <System Management BIOS> at iomem 0xbcd72000-0xbcd7201e smbios0: Version: 3.3, BCD Revision: 3.3 acpi0: <ALASKA A M I > acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 350 Event timer "HPET1" frequency 14318180 Hz quality 350 Event timer "HPET2" frequency 14318180 Hz quality 350 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 2.1 on pci0 pci1: <ACPI PCI bus> on pcib1 xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfc6a0000-0xfc6a7fff irq 36 at device 0.0 on pci1 xhci0: 32 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 ahci0: <AHCI SATA controller> mem 0xfc680000-0xfc69ffff irq 37 at device 0.1 on pci1 ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahcich6: <AHCI channel> at channel 6 on ahci0 ahcich7: <AHCI channel> at channel 7 on ahci0 pcib2: <ACPI PCI-PCI bridge> irq 38 at device 0.2 on pci1 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 36 at device 0.0 on pci2 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> irq 36 at device 0.0 on pci3 pci4: <ACPI PCI bus> on pcib4 vgapci0: <VGA-compatible display> port 0xf000-0xf07f mem 0xfb000000-0xfbffffff,0xfc000000-0xfc01ffff irq 36 at device 0.0 on pci4 vgapci0: Boot video device pcib5: <ACPI PCI-PCI bridge> irq 37 at device 1.0 on pci2 pci5: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> irq 38 at device 2.0 on pci2 pci6: <ACPI PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> irq 39 at device 3.0 on pci2 pci7: <ACPI PCI bus> on pcib7 igc0: <Intel(R) Ethernet Controller I225-V> mem 0xfc300000-0xfc3fffff,0xfc400000-0xfc403fff irq 39 at device 0.0 on pci7 igc0: Using 1024 TX descriptors and 1024 RX descriptors igc0: Using 4 RX queues 4 TX queues igc0: Using MSI-X interrupts with 5 vectors igc0: Ethernet address: 88:c9:b3:bf:75:60 igc0: netmap queues/slots: TX 4/1024, RX 4/1024 pcib8: <ACPI PCI-PCI bridge> irq 36 at device 4.0 on pci2 pci8: <ACPI PCI bus> on pcib8 nvme0: <Generic NVMe Device> mem 0xfc500000-0xfc503fff,0xfc504000-0xfc5040ff irq 36 at device 0.0 on pci8 pcib9: <ACPI PCI-PCI bridge> irq 36 at device 8.0 on pci2 pci9: <ACPI PCI bus> on pcib9 pcib10: <ACPI PCI-PCI bridge> at device 2.2 on pci0 pci10: <ACPI PCI bus> on pcib10 ix0: <Intel(R) X550-T2> mem 0xe0800000-0xe0bfffff,0xe0c04000-0xe0c07fff irq 40 at device 0.0 on pci10 ix0: Using 2048 TX descriptors and 2048 RX descriptors ix0: Using 6 RX queues 6 TX queues ix0: Using MSI-X interrupts with 7 vectors ix0: allocated for 6 queues ix0: allocated for 6 rx queues ix0: Ethernet address: d0:50:99:de:c1:1b ix0: PCI Express Bus: Speed 8.0GT/s Width x1 ix0: Option ROM V1-b1927-p0 eTrack 0x80000aee PHY FW V523 ix0: netmap queues/slots: TX 6/2048, RX 6/2048 ix1: <Intel(R) X550-T2> mem 0xe0400000-0xe07fffff,0xe0c00000-0xe0c03fff irq 41 at device 0.1 on pci10 ix1: Using 2048 TX descriptors and 2048 RX descriptors ix1: Using 6 RX queues 6 TX queues ix1: Using MSI-X interrupts with 7 vectors ix1: allocated for 6 queues ix1: allocated for 6 rx queues ix1: Ethernet address: d0:50:99:de:c1:1c ix1: PCI Express Bus: Speed 8.0GT/s Width x1 ix1: Option ROM V1-b1927-p0 eTrack 0x80000aee PHY FW V523 ix1: netmap queues/slots: TX 6/2048, RX 6/2048 pcib11: <ACPI PCI-PCI bridge> at device 8.1 on pci0 pci11: <ACPI PCI bus> on pcib11 vgapci1: <VGA-compatible display> port 0xe000-0xe0ff mem 0xd0000000-0xdfffffff,0xe0000000-0xe01fffff,0xfcb00000-0xfcb7ffff irq 38 at device 0.0 on pci11 hdac0: <ATI (0x1637) HDA Controller> mem 0xfcb88000-0xfcb8bfff irq 39 at device 0.1 on pci11 pci11: <encrypt/decrypt> at device 0.2 (no driver attached) xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfc900000-0xfc9fffff irq 37 at device 0.3 on pci11 xhci1: 64 bytes context size, 64-bit DMA usbus1 on xhci1 usbus1: 5.0Gbps Super Speed USB v3.0 xhci2: <XHCI (generic) USB 3.0 controller> mem 0xfc800000-0xfc8fffff irq 38 at device 0.4 on pci11 xhci2: 64 bytes context size, 64-bit DMA usbus2 on xhci2 usbus2: 5.0Gbps Super Speed USB v3.0 hdac1: <AMD Raven HDA Controller> mem 0xfcb80000-0xfcb87fff irq 36 at device 0.6 on pci11 pcib12: <ACPI PCI-PCI bridge> at device 8.2 on pci0 pci12: <ACPI PCI bus> on pcib12 ahci1: <AMD KERNCZ AHCI SATA controller> mem 0xfcc01000-0xfcc017ff irq 34 at device 0.0 on pci12 ahci1: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS ahcich8: <AHCI channel> at channel 0 on ahci1 ahci2: <AMD KERNCZ AHCI SATA controller> mem 0xfcc00000-0xfcc007ff irq 35 at device 0.1 on pci12 ahci2: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS ahcich9: <AHCI channel> at channel 0 on ahci2 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 acpi_button0: <Power Button> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0 hwpstate0: <Cool`n'Quiet 2.0> on cpu0 Timecounter "TSC-low" frequency 1949999786 Hz quality 1000 Timecounters tick every 1.000 msec ZFS filesystem version: 5 ZFS storage pool version: features support (5000) ugen1.1: <AMD XHCI root HUB> at usbus1 ugen2.1: <AMD XHCI root HUB> at usbus2 ugen0.1: <AMD XHCI root HUB> at usbus0 nvme0: Allocated 200MB host memory buffer uhub0 on usbus1 uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 uhub1 on usbus2 uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 uhub2 on usbus0 uhub2: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 Trying to mount root from zfs:pfSense/ROOT/default []... nda0 at nvme0 bus 0 scbus10 target 0 lun 1 nda0: <WD Blue SN570 250GB 234110WD 22395T804226> nda0: Serial Number 22395T804226 nda0: nvme version 1.4 nda0: 238475MB (488397168 512 byte sectors) uhub1: 6 ports with 6 removable, self powered uhub0: 6 ports with 6 removable, self powered uhub2: 22 ports with 22 removable, self powered Root mount waiting for: usbus0 ugen0.2: <American Megatrends Inc. Virtual Hub> at usbus0 uhub3 on uhub2 uhub3: <7-port Hub> on usbus0 uhub3: 5 ports with 5 removable, self powered Root mount waiting for: usbus0 ugen0.3: <American Megatrends Inc. Virtual Ethernet> at usbus0 Root mount waiting for: usbus0 ugen0.4: <American Megatrends Inc. Virtual Keyboard and Mouse> at usbus0 ukbd0 on uhub3 ukbd0: <Keyboard Interface> on usbus0 kbd2 at ukbd0 CPU: AMD Ryzen 5 5600G with Radeon Graphics (3900.00-MHz K8-class CPU) Origin="AuthenticAMD" Id=0xa50f00 Family=0x19 Model=0x50 Stepping=0 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x7ef8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX> Structured Extended Features=0x219c97a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA> Structured Extended Features2=0x40069c<UMIP,PKU,OSPKE,VAES,VPCLMULQDQ,RDPID> Structured Extended Features3=0x10<FSRM> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> AMD Extended Feature Extensions ID EBX=0x191ef657<CLZERO,IRPerf,XSaveErPtr,RDPRU,WBNOINVD,IBPB,IBRS,STIBP,STIBP_ALWAYSON,PREFER_IBRS,SSBD> SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 TSC: P-state invariant, performance statistics -
You should disable the on-board audio, though I doubt it's connected to this issue:
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0Ok the actual driver attachment looks to have happened after the bootlog completes but it should be in the main system log.
Yes, you could disable the usbus or root device completely but it would be better to disable just the Ethernet device if you can.
-
Try running:
usbconfig -d ugen0.3 dump_all_config_descIt looks like it has more than one config index, in which case we can force the other one which may make it fail to load.
-
@stephenw10 said in Netgate Device ID changing on power loss:
You should disable the on-board audio, though I doubt it's connected to this issue:
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0Ok the actual driver attachment looks to have happened after the bootlog completes but it should be in the main system log.
Yes, you could disable the usbus or root device completely but it would be better to disable just the Ethernet device if you can.
I'll look into disabling the audio, agreed, makes no sense having that on.
Here's the output of the command in your second comment:
/root: usbconfig -d ugen0.3 dump_all_con fig_desc ugen0.3: <American Megatrends Inc. Virtual Ethernet> at usbus0, cfg=0 md=HOST sp d=HIGH (480Mbps) pwr=ON (0mA) Configuration index 0 bLength = 0x0009 bDescriptorType = 0x0002 wTotalLength = 0x0050 bNumInterfaces = 0x0002 bConfigurationValue = 0x0001 iConfiguration = 0x0000 <no string> bmAttributes = 0x00c0 bMaxPower = 0x0000 Interface 0 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0000 bAlternateSetting = 0x0000 bNumEndpoints = 0x0001 bInterfaceClass = 0x0002 <Communication device> bInterfaceSubClass = 0x0002 bInterfaceProtocol = 0x00ff iInterface = 0x0004 <RNDIS Notification Interface> Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x00 RAW dump: 0x00 | 0x05, 0x24, 0x00, 0x10, 0x01 Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x01 RAW dump: 0x00 | 0x05, 0x24, 0x01, 0x00, 0x01 Additional Descriptor bLength = 0x04 bDescriptorType = 0x24 bDescriptorSubType = 0x02 RAW dump: 0x00 | 0x04, 0x24, 0x02, 0x00 Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x06 RAW dump: 0x00 | 0x05, 0x24, 0x06, 0x00, 0x01 Additional Descriptor bLength = 0x0d bDescriptorType = 0x24 bDescriptorSubType = 0x0f RAW dump: 0x00 | 0x0d, 0x24, 0x0f, 0x05, 0x00, 0x00, 0x00, 0x00, 0x08 | 0xea, 0x05, 0x00, 0x00, 0x00 Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0081 <IN> bmAttributes = 0x0003 <INTERRUPT> wMaxPacketSize = 0x0400 bInterval = 0x0001 bRefresh = 0x0000 bSynchAddress = 0x0000 Interface 1 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0001 bAlternateSetting = 0x0000 bNumEndpoints = 0x0002 bInterfaceClass = 0x000a <CDC-data> bInterfaceSubClass = 0x0000 bInterfaceProtocol = 0x0000 iInterface = 0x0006 <RNDIS Data Interface> Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0002 <OUT> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0083 <IN> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Configuration index 1 bLength = 0x0009 bDescriptorType = 0x0002 wTotalLength = 0x0050 bNumInterfaces = 0x0002 bConfigurationValue = 0x0002 iConfiguration = 0x0000 <no string> bmAttributes = 0x00c0 bMaxPower = 0x0000 Interface 0 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0000 bAlternateSetting = 0x0000 bNumEndpoints = 0x0001 bInterfaceClass = 0x0002 <Communication device> bInterfaceSubClass = 0x0006 bInterfaceProtocol = 0x0000 iInterface = 0x0007 <CDC Notification Interface> Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x00 RAW dump: 0x00 | 0x05, 0x24, 0x00, 0x10, 0x01 Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x01 RAW dump: 0x00 | 0x05, 0x24, 0x01, 0x00, 0x01 Additional Descriptor bLength = 0x04 bDescriptorType = 0x24 bDescriptorSubType = 0x02 RAW dump: 0x00 | 0x04, 0x24, 0x02, 0x00 Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x06 RAW dump: 0x00 | 0x05, 0x24, 0x06, 0x00, 0x01 Additional Descriptor bLength = 0x0d bDescriptorType = 0x24 bDescriptorSubType = 0x0f RAW dump: 0x00 | 0x0d, 0x24, 0x0f, 0x08, 0x00, 0x00, 0x00, 0x00, 0x08 | 0xea, 0x05, 0x00, 0x00, 0x00 Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0081 <IN> bmAttributes = 0x0003 <INTERRUPT> wMaxPacketSize = 0x0400 bInterval = 0x0001 bRefresh = 0x0000 bSynchAddress = 0x0000 Interface 1 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0001 bAlternateSetting = 0x0000 bNumEndpoints = 0x0002 bInterfaceClass = 0x000a <CDC-data> bInterfaceSubClass = 0x0000 bInterfaceProtocol = 0x0000 iInterface = 0x0009 <CDC Data Interface> Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0002 <OUT> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0083 <IN> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 -
Hmm, both indexs include CDC data which will likely be the ue0 device. The logs just after boot should confirm that showing cdce though.
It feels like it should be possible to add a USB quirk to just stop that loading but I don't see an option for that:
https://man.freebsd.org/cgi/man.cgi?query=usb_quirkOtherwise disabling cdce0 or the USB bus or controller should be possible.
-
I have an older ASRock Rack motherboard, and I also had my share of struggles with their BMC port sharing. On this motherboard, from what I found in my research, this virtual AMD port appears when instead of using a dedicated BMC port, you share this port for other purposes, or when you only have one cable connected to a certain port.
As far as I understand and remember, the settings for this behavior are not in the BIOS but in the BMC’s web interface. In the Configuration section, there should be several options for network, link configuration, and choosing between shared or dedicated. One of these options should disable this virtual interface, but I’m not entirely sure. The motherboard manual might provide more detailed descriptions of the BMC settings, but on my board, these settings are quite confusing, and the manual doesn’t cover all of them.
Overall, I had a similar idea—to have access to both the BIOS and everything else. But as usual, since their BMC relies on Java, which can’t be updated, it’s impossible to use their applets because the board is no longer supported. In the end, I connected a PiKVM to this board.
For anyone considering purchasing an ASRock Rack, I highly advise against it if you plan to use the board longer than its support period (typically 2-3 years), as the BMC might "turn into a pumpkin" after that.
