pfSense CE 2.8.0 upgrade stalls after reboot and gets stuck in Stage 2
-
I guess you mean setting the Display to something other than Default. I tried Standard VGA and VMware compatible but it always gets stuck here.
Works just fine when rolling back to 2.7.2. Same happens with 2.8.0.
-
@bamypamy when it just boots it will show you a menu with number options, on that menu you can press 6 I think or something like that to change if it boots to a serial menu or a video menu
-
Nope he means setting the console type in pfSense to video rather than serial or dual console. You can set it temporarily at the loader menu or in Sys > Adv in the webgui before upgrade.
That screenshot seems to show it is finding the boot device but is writing to the other console. In which case setting video as primary may well be the correct setting.
-
Ah that's what you mean. Thanks for pointing it out.
Unfortunately it is already set to video by default. I tried all the other options but still the same.
The only thing that changes is that whenever I set it to something other than video it shows this additional line before it stops.Dual Console: Video Primary, Serial Secondary
By the way it is Menu point 5.
-
When I boot with kernel.old during the first restart after updating from 2.7.2 to 2.8.1, it boots without any problems and completes the update. After the next restart, it boots with kernel FreeBSD15 under 2.8.1.
-
Huh so boot's correctly after switching back the upgraded kernel?
-
@stephenw10 Sorry, I didn't express myself clearly.
I started the update from 2.7.2 to 2.8.1. When the firewall rebooted, I selected option 6 in the boot menu and chose the old kernel. The firewall then booted with the old kernel, and at one point it also says that pfsense 2.7.2 is booting. Nevertheless, the update to 2.8.1 continued. When that was finished, the firewall restarted again. This time I did not select a different kernel. The firewall booted up without any problems and I was presented with version 2.8.1, and the kernel was also the new one (FreeBSD 15-Current).Unfortunately, changing the video mode did not work for me, see comment above.
I would have liked to try setting up a new VM directly with 2.8.1, but since there is now only the netgate installer and I have to use a proxy for Internet access and this cannot be specified in the installer, unfortunately this was not possible. I would have been interested to see whether this VM would start without any problems or also get stuck.
For me, this means installing with 2.7.2 from now on, because there is an image for it, and then updating with the above workaround.
It's a shame about the installer; I hope netgate will add the option for a proxy in the installer.
