Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    All traffic stopped, looks a bug to me!

    Scheduled Pinned Locked Moved General pfSense Questions
    24 Posts 4 Posters 297 Views 4 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • patient0P Offline
      patient0 @GTA_doum
      last edited by

      @GTA_doum said in All traffic stopped, looks a bug to me!:

      I tried other hardware,

      And the other hardware did not have a RealTek nic?

      The log you posted shows that re1 has a watchdog timeout and that is a typical RealTek driver issue (run a search for 'kernel re watchdog timeout' in this forum, sort for post time).
      That would indicate that in that case the network card did play a role in the issue.

      G 1 Reply Last reply Reply Quote 0
      • G Offline
        GTA_doum @patient0
        last edited by GTA_doum

        @patient0 I just checked and yes, the mini computer I used to test has a Realtek NIC (most onboard NIC have Realtek cards, even a lof of USB adapter have a Realtek chipset in them). On the first site mentioned, I can install another NIC and will try an Intel one. For mini-computers, I cannot unfortunetely install another NIC, there is no space in those box to install a PCIe card.
        What I fail to understand is why a pfSense was working for over a year and suddenly starts acting up...

        G 1 Reply Last reply Reply Quote 0
        • G Offline
          GTA_doum @GTA_doum
          last edited by

          I just recalled what we did at that place few months ago, we upgraded pfSense to 2.8.0 and lately to 2.8.1. Which means the Realtek driver in 2.8 is indeed misbehaving, if the driver is the cause.
          The first site I mentioned was always acting up, even with version 2.7 of pfSense.

          tinfoilmattT 1 Reply Last reply Reply Quote 0
          • tinfoilmattT Offline
            tinfoilmatt @GTA_doum
            last edited by

            @GTA_doum Sooooooo, not a bug then.

            G 1 Reply Last reply Reply Quote 0
            • G Offline
              GTA_doum @tinfoilmatt
              last edited by

              @tinfoilmatt Well, if the driver has a bug, that is included in pfSense/BSD, it is still a bug...

              tinfoilmattT 1 Reply Last reply Reply Quote 0
              • tinfoilmattT Offline
                tinfoilmatt @GTA_doum
                last edited by

                @GTA_doum If Netgate has provided you with a modified driver that resolves your issue, then perhaps FreeBSD's issue tracker will be receptive to your report.

                G 1 Reply Last reply Reply Quote 0
                • G Offline
                  GTA_doum @tinfoilmatt
                  last edited by

                  @tinfoilmatt I'll gladly do it once confirmed. It will take few months to confirm, as the issue sometimes could happen after few weeks. It's been few times I taught it was fixed, but then reappeared. I am still unsure what triggers it, maybe the amount of traffic, but really, I could not make a link of cause to effect.

                  1 Reply Last reply Reply Quote 0
                  • stephenw10S Offline
                    stephenw10 Netgate Administrator
                    last edited by

                    I mean there is a bug there but it's known. The Realtek hardware is such that there is little motivation for devs to fix it. And the newer Realtek NICs are better anyway.

                    But, yes, if you see that watchdog error from the re(4) driver then definitely try the alternative driver.

                    1 Reply Last reply Reply Quote 0
                    • G Offline
                      GTA_doum
                      last edited by GTA_doum

                      At the second site, I've tried to install the package, it went fine. I added the two lines in loader.conf.local and rebooted, LAN was not reachable. I had to remove the two lines in locader.conf.local and reboot to have access to the LAN again. I also tried to add the lines to loader.conf, same results.
                      Any suggestions as to what happened?

                      1 Reply Last reply Reply Quote 0
                      • stephenw10S Offline
                        stephenw10 Netgate Administrator
                        last edited by

                        Was there anything logged at boot? What NIC(s) does that device have exactly?

                        Was that site also showing the Realtek watchdog errors sing the standard driver?

                        G 1 Reply Last reply Reply Quote 0
                        • G Offline
                          GTA_doum @stephenw10
                          last edited by

                          @stephenw10 I kept a copy of dmesg output before I rebooted it. I'll try to paste it here... Yes, both sites have showed the watchdog error before blocking all traffic to the LAN NIC.

                          G 1 Reply Last reply Reply Quote 0
                          • G Offline
                            GTA_doum @GTA_doum
                            last edited by GTA_doum

                            This is dmesg after booting with two lines in loader.conf :

                            ---<<BOOT>>---
                            Copyright (c) 1992-2024 The FreeBSD Project.
                            Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
                            The Regents of the University of California. All rights reserved.
                            FreeBSD is a registered trademark of The FreeBSD Foundation.
                            FreeBSD 15.0-CURRENT #21 RELENG_2_8_1-n256095-47c932dcc0e9: Thu Aug 28 16:27:48 UTC 2025
                            root@pfsense-build-release-amd64-1.eng.atx.netgate.com:/var/jenkins/workspace/pfSense-CE-snapshots-2_8_1-main/obj/amd64/AupY3aTL/var/jenkins/workspace/pfSense-CE-snapshots-2_8_1-main/sources/FreeBSD-src-RELENG_2_8_1/amd64.amd64/sys/pfSense amd64
                            FreeBSD clang version 19.1.5 (https://github.com/llvm/llvm-project.git llvmorg-19.1.5-0-gab4b5a2db582)
                            VT(efifb): resolution 800x600
                            CPU: Intel(R) Celeron(R) 2955U @ 1.40GHz (1396.85-MHz K8-class CPU)
                            Origin="GenuineIntel" Id=0x40651 Family=0x6 Model=0x45 Stepping=1
                            Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
                            Features2=0x4ddaebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,XSAVE,OSXSAVE,RDRAND>
                            AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
                            AMD Features2=0x21<LAHF,ABM>
                            Structured Extended Features=0x2603<FSGSBASE,TSCADJ,ERMS,INVPCID,NFPUSG>
                            XSAVE Features=0x1<XSAVEOPT>
                            VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
                            TSC: P-state invariant, performance statistics
                            real memory = 4294967296 (4096 MB)
                            avail memory = 3989393408 (3804 MB)
                            Event timer "LAPIC" quality 600
                            ACPI APIC Table: <ALASKA A M I >
                            FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
                            FreeBSD/SMP: 1 package(s) x 2 core(s)
                            random: registering fast source Intel Secure Key RNG
                            random: fast provider: "Intel Secure Key RNG"
                            random: unblocking device.
                            WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS.
                            WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS.
                            ioapic0 <Version 2.0> irqs 0-39
                            Launching APs: 1
                            TCP_ratelimit: Is now initialized
                            ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
                            ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                            module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80758a00, 0) error 1
                            ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
                            ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                            module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80758ab0, 0) error 1
                            ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
                            ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                            module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80758b60, 0) error 1
                            iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
                            iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
                            module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff807781d0, 0) error 1
                            iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
                            iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
                            module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80778280, 0) error 1
                            iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
                            iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
                            module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80778330, 0) error 1
                            random: entropy device external interface
                            wlan: mac acl policy registered
                            kbd1 at kbdmux0
                            WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0.
                            efirtc0: <EFI Realtime Clock>
                            efirtc0: registered as a time-of-day clock, resolution 1.000000s
                            netgate0: <unknown hardware>
                            netgate0: version: 0.1
                            smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe
                            smbios0: Version: 2.8, BCD Revision: 2.8
                            acpi0: <ALASKA A M I >
                            acpi0: Power Button (fixed)
                            cpu0: <ACPI CPU> on acpi0
                            hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
                            Timecounter "HPET" frequency 14318180 Hz quality 950
                            Event timer "HPET" frequency 14318180 Hz quality 550
                            Event timer "HPET1" frequency 14318180 Hz quality 440
                            Event timer "HPET2" frequency 14318180 Hz quality 440
                            Event timer "HPET3" frequency 14318180 Hz quality 440
                            Event timer "HPET4" frequency 14318180 Hz quality 440
                            Event timer "HPET5" frequency 14318180 Hz quality 440
                            Event timer "HPET6" frequency 14318180 Hz quality 440
                            atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
                            atrtc0: Warning: Couldn't map I/O.
                            atrtc0: registered as a time-of-day clock, resolution 1.000000s
                            Event timer "RTC" frequency 32768 Hz quality 0
                            attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
                            Timecounter "i8254" frequency 1193182 Hz quality 0
                            Event timer "i8254" frequency 1193182 Hz quality 100
                            Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
                            acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
                            pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
                            pci0: <ACPI PCI bus> on pcib0
                            vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0xa7c00000-0xa7ffffff,0xb0000000-0xbfffffff irq 16 at device 2.0 on pci0
                            vgapci0: Boot video device
                            hdac0: <Intel Haswell HDA Controller> mem 0xa8214000-0xa8217fff irq 16 at device 3.0 on pci0
                            xhci0: <Intel Panther Point USB 3.0 controller> mem 0xa8200000-0xa820ffff irq 21 at device 20.0 on pci0
                            xhci0: 32 bytes context size, 64-bit DMA
                            xhci0: Port routing mask set to 0xffffffff
                            usbus0 on xhci0
                            usbus0: 5.0Gbps Super Speed USB v3.0
                            pci0: <simple comms> at device 22.0 (no driver attached)
                            hdac1: <Intel Lynx Point-LP HDA Controller> mem 0xa8210000-0xa8213fff irq 22 at device 27.0 on pci0
                            pcib1: <ACPI PCI-PCI bridge> irq 18 at device 28.0 on pci0
                            pci1: <ACPI PCI bus> on pcib1
                            re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x4000-0x40ff mem 0xa8104000-0xa8104fff,0xa8100000-0xa8103fff irq 18 at device 0.0 on pci1
                            re0: Using 1 MSI-X message
                            re0: turning off MSI enable bit.
                            re0: Chip rev. 0x54000000
                            re0: MAC rev. 0x00100000
                            miibus0: <MII bus> on re0
                            rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
                            rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
                            re0: Using defaults for TSO: 65518/35/2048
                            re0: Ethernet address: 00:e0:4c:33:1f:c4
                            re0: netmap queues/slots: TX 1/256, RX 1/256
                            pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
                            pci2: <ACPI PCI bus> on pcib2
                            re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xa8004000-0xa8004fff,0xa8000000-0xa8003fff irq 16 at device 0.0 on pci2
                            re1: Using 1 MSI-X message
                            re1: turning off MSI enable bit.
                            re1: Chip rev. 0x54000000
                            re1: MAC rev. 0x00100000
                            miibus1: <MII bus> on re1
                            rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1
                            rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
                            re1: Using defaults for TSO: 65518/35/2048
                            re1: Ethernet address: 00:e0:4c:33:1f:c5
                            re1: netmap queues/slots: TX 1/256, RX 1/256
                            ehci0: <Intel Lynx Point-LP USB 2.0 controller> mem 0xa821a000-0xa821a3ff irq 23 at device 29.0 on pci0
                            usbus1: EHCI version 1.0
                            usbus1 on ehci0
                            usbus1: 480Mbps High Speed USB v2.0
                            isab0: <PCI-ISA bridge> at device 31.0 on pci0
                            isa0: <ISA bus> on isab0
                            ahci0: <Intel Lynx Point-LP AHCI SATA controller> port 0x50b0-0x50b7,0x50a0-0x50a3,0x5090-0x5097,0x5080-0x5083,0x5060-0x507f mem 0xa8219000-0xa82197ff irq 19 at device 31.2 on pci0
                            ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier not supported
                            ahcich1: <AHCI channel> at channel 1 on ahci0
                            acpi_button0: <Sleep Button> on acpi0
                            acpi_button1: <Power Button> on acpi0
                            acpi_tz0: <Thermal Zone> on acpi0
                            acpi_tz1: <Thermal Zone> on acpi0
                            atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
                            atkbd0: <AT Keyboard> irq 1 on atkbdc0
                            kbd0 at atkbd0
                            atkbd0: [GIANT-LOCKED]
                            uart: ns8250: UART FCR is broken
                            uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
                            uart: ns8250: UART FCR is broken
                            uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
                            est0: <Enhanced SpeedStep Frequency Control> on cpu0
                            cpufreq0: <CPU frequency control> on cpu0
                            cpufreq1: <CPU frequency control> on cpu1
                            Timecounter "TSC" frequency 1396766502 Hz quality 1000
                            Timecounters tick every 1.000 msec
                            ugen1.1: <Intel EHCI root HUB> at usbus1
                            ugen0.1: <Intel XHCI root HUB> at usbus0
                            uhub0 on usbus1
                            uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
                            uhub1 on usbus0
                            uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
                            ZFS filesystem version: 5
                            ZFS storage pool version: features support (5000)
                            hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
                            hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0
                            pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0
                            hdacc1: <Realtek ALC662 rev3 HDA CODEC> at cad 0 on hdac1
                            hdaa1: <Realtek ALC662 rev3 Audio Function Group> at nid 1 on hdacc1
                            pcm1: <Realtek ALC662 rev3 (Rear Analog)> at nid 20 and 24 on hdaa1
                            Trying to mount root from zfs:pfSense/ROOT/default []...
                            ada0 at ahcich1 bus 0 scbus0 target 0 lun 0
                            ada0: <SSD 32GB Q0927A> ACS-2 ATA SATA 3.x device
                            ada0: Serial Number 2021011201184
                            ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
                            ada0: Command Queueing enabled
                            ada0: 30029MB (61500000 512 byte sectors)
                            uhub1: 13 ports with 13 removable, self powered
                            uhub0: 2 ports with 2 removable, self powered
                            ugen0.2: <vendor 0x1a40 USB 2.0 Hub> at usbus0
                            uhub2 on uhub1
                            uhub2: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 1> on usbus0
                            Root mount waiting for: usbus0 usbus1
                            ugen1.2: <vendor 0x8087 product 0x8000> at usbus1
                            uhub3 on uhub0
                            uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1
                            uhub2: 4 ports with 4 removable, self powered
                            uhub3: 8 ports with 8 removable, self powered
                            ugen0.3: <vendor 0x04f3 product 0x0103> at usbus0
                            ukbd0 on uhub1
                            ukbd0: <vendor 0x04f3 product 0x0103, class 0/0, rev 1.10/1.07, addr 2> on usbus0
                            kbd2 at ukbd0
                            uhid0 on uhub1
                            uhid0: <vendor 0x04f3 product 0x0103, class 0/0, rev 1.10/1.07, addr 2> on usbus0
                            CPU: Intel(R) Celeron(R) 2955U @ 1.40GHz (1396.77-MHz K8-class CPU)
                            Origin="GenuineIntel" Id=0x40651 Family=0x6 Model=0x45 Stepping=1
                            Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
                            Features2=0x4ddaebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,XSAVE,OSXSAVE,RDRAND>
                            AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
                            AMD Features2=0x21<LAHF,ABM>
                            Structured Extended Features=0x2603<FSGSBASE,TSCADJ,ERMS,INVPCID,NFPUSG>
                            Structured Extended Features3=0x9c000600<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
                            XSAVE Features=0x1<XSAVEOPT>
                            VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
                            TSC: P-state invariant, performance statistics
                            ichsmb0: <Intel Lynx Point-LP SMBus controller> port 0x5040-0x505f mem 0xa8218000-0xa82180ff irq 18 at device 31.3 on pci0
                            smbus0: <System Management Bus> on ichsmb0
                            wg0: changing name to 'tun_wg0'
                            tun_wg0: link state changed to UP
                            re0: link state changed to UP
                            re1: link state changed to UP
                            re0: link state changed to DOWN
                            lo0: link state changed to UP
                            re1: link state changed to DOWN
                            pflog0: promiscuous mode enabled
                            re0: link state changed to UP
                            re1: link state changed to UP
                            tun_wg0: link state changed to DOWN
                            wg0: changing name to 'tun_wg0'
                            tun_wg0: link state changed to UP
                            ugen0.3: <vendor 0x04f3 product 0x0103> at usbus0 (disconnected)
                            ukbd0: at uhub1, port 3, addr 2 (disconnected)
                            ukbd0: detached
                            uhid0: at uhub1, port 3, addr 2 (disconnected)
                            uhid0: detached
                            tun_wg0: link state changed to DOWN
                            pflog0: promiscuous mode disabled
                            Waiting (max 60 seconds) for system process vnlru' to stop... done Waiting (max 60 seconds) for system process syncer' to stop...
                            Syncing disks, vnodes remaining... 0 0 done
                            All buffers synced.
                            Uptime: 9m13s
                            uhub3: detached
                            uhub0: detached
                            re1: link state changed to DOWN
                            re1: link state changed to UP
                            re0: link state changed to DOWN

                            G 1 Reply Last reply Reply Quote 0
                            • G Offline
                              GTA_doum @GTA_doum
                              last edited by GTA_doum

                              This is the next boot, after creating loader.conf.local with the two lines :

                              ---<<BOOT>>---
                              Copyright (c) 1992-2024 The FreeBSD Project.
                              Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
                              The Regents of the University of California. All rights reserved.
                              FreeBSD is a registered trademark of The FreeBSD Foundation.
                              FreeBSD 15.0-CURRENT #21 RELENG_2_8_1-n256095-47c932dcc0e9: Thu Aug 28 16:27:48 UTC 2025
                              root@pfsense-build-release-amd64-1.eng.atx.netgate.com:/var/jenkins/workspace/pfSense-CE-snapshots-2_8_1-main/obj/amd64/AupY3aTL/var/jenkins/workspace/pfSense-CE-snapshots-2_8_1-main/sources/FreeBSD-src-RELENG_2_8_1/amd64.amd64/sys/pfSense amd64
                              FreeBSD clang version 19.1.5 (https://github.com/llvm/llvm-project.git llvmorg-19.1.5-0-gab4b5a2db582)
                              VT(efifb): resolution 800x600
                              CPU: Intel(R) Celeron(R) 2955U @ 1.40GHz (1396.86-MHz K8-class CPU)
                              Origin="GenuineIntel" Id=0x40651 Family=0x6 Model=0x45 Stepping=1
                              Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
                              Features2=0x4ddaebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,XSAVE,OSXSAVE,RDRAND>
                              AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
                              AMD Features2=0x21<LAHF,ABM>
                              Structured Extended Features=0x2603<FSGSBASE,TSCADJ,ERMS,INVPCID,NFPUSG>
                              XSAVE Features=0x1<XSAVEOPT>
                              VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
                              TSC: P-state invariant, performance statistics
                              real memory = 4294967296 (4096 MB)
                              avail memory = 3987218432 (3802 MB)
                              Event timer "LAPIC" quality 600
                              ACPI APIC Table: <ALASKA A M I >
                              FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
                              FreeBSD/SMP: 1 package(s) x 2 core(s)
                              random: registering fast source Intel Secure Key RNG
                              random: fast provider: "Intel Secure Key RNG"
                              random: unblocking device.
                              WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS.
                              WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS.
                              ioapic0 <Version 2.0> irqs 0-39
                              Launching APs: 1
                              TCP_ratelimit: Is now initialized
                              ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
                              ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                              module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80758a00, 0) error 1
                              ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
                              ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                              module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80758ab0, 0) error 1
                              ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
                              ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                              module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80758b60, 0) error 1
                              iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
                              iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
                              module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff807781d0, 0) error 1
                              iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
                              iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
                              module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80778280, 0) error 1
                              iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
                              iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
                              module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80778330, 0) error 1
                              random: entropy device external interface
                              wlan: mac acl policy registered
                              kbd1 at kbdmux0
                              WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0.
                              efirtc0: <EFI Realtime Clock>
                              efirtc0: registered as a time-of-day clock, resolution 1.000000s
                              netgate0: <unknown hardware>
                              netgate0: version: 0.1
                              smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe
                              smbios0: Version: 2.8, BCD Revision: 2.8
                              acpi0: <ALASKA A M I >
                              acpi0: Power Button (fixed)
                              cpu0: <ACPI CPU> on acpi0
                              hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
                              Timecounter "HPET" frequency 14318180 Hz quality 950
                              Event timer "HPET" frequency 14318180 Hz quality 550
                              Event timer "HPET1" frequency 14318180 Hz quality 440
                              Event timer "HPET2" frequency 14318180 Hz quality 440
                              Event timer "HPET3" frequency 14318180 Hz quality 440
                              Event timer "HPET4" frequency 14318180 Hz quality 440
                              Event timer "HPET5" frequency 14318180 Hz quality 440
                              Event timer "HPET6" frequency 14318180 Hz quality 440
                              atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
                              atrtc0: Warning: Couldn't map I/O.
                              atrtc0: registered as a time-of-day clock, resolution 1.000000s
                              Event timer "RTC" frequency 32768 Hz quality 0
                              attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
                              Timecounter "i8254" frequency 1193182 Hz quality 0
                              Event timer "i8254" frequency 1193182 Hz quality 100
                              Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
                              acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
                              pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
                              pci0: <ACPI PCI bus> on pcib0
                              vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0xa7c00000-0xa7ffffff,0xb0000000-0xbfffffff irq 16 at device 2.0 on pci0
                              vgapci0: Boot video device
                              hdac0: <Intel Haswell HDA Controller> mem 0xa8214000-0xa8217fff irq 16 at device 3.0 on pci0
                              xhci0: <Intel Panther Point USB 3.0 controller> mem 0xa8200000-0xa820ffff irq 21 at device 20.0 on pci0
                              xhci0: 32 bytes context size, 64-bit DMA
                              xhci0: Port routing mask set to 0xffffffff
                              usbus0 on xhci0
                              usbus0: 5.0Gbps Super Speed USB v3.0
                              pci0: <simple comms> at device 22.0 (no driver attached)
                              hdac1: <Intel Lynx Point-LP HDA Controller> mem 0xa8210000-0xa8213fff irq 22 at device 27.0 on pci0
                              pcib1: <ACPI PCI-PCI bridge> irq 18 at device 28.0 on pci0
                              pci1: <ACPI PCI bus> on pcib1
                              re0: <Realtek PCIe GbE Family Controller> port 0x4000-0x40ff mem 0xa8104000-0xa8104fff,0xa8100000-0xa8103fff irq 18 at device 0.0 on pci1
                              re0: Using Memory Mapping!
                              re0: Using 1 MSI-X message
                              re0: version:1.100.00
                              re0: Ethernet address: 00:e0:4c:33:1f:c4

                              This product is covered by one or more of the following patents:
                              US6,570,884, US6,115,776, and US6,327,625.
                              re0: Using defaults for TSO: 65518/35/2048
                              re0: Ethernet address: 00:e0:4c:33:1f:c4
                              pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
                              pci2: <ACPI PCI bus> on pcib2
                              re1: <Realtek PCIe GbE Family Controller> port 0x3000-0x30ff mem 0xa8004000-0xa8004fff,0xa8000000-0xa8003fff irq 16 at device 0.0 on pci2
                              re1: Using Memory Mapping!
                              re1: Using 1 MSI-X message
                              re1: version:1.100.00
                              re1: Ethernet address: 00:e0:4c:33:1f:c5

                              This product is covered by one or more of the following patents:
                              US6,570,884, US6,115,776, and US6,327,625.
                              re1: Using defaults for TSO: 65518/35/2048
                              re1: Ethernet address: 00:e0:4c:33:1f:c5
                              ehci0: <Intel Lynx Point-LP USB 2.0 controller> mem 0xa821a000-0xa821a3ff irq 23 at device 29.0 on pci0
                              usbus1: EHCI version 1.0
                              usbus1 on ehci0
                              usbus1: 480Mbps High Speed USB v2.0
                              isab0: <PCI-ISA bridge> at device 31.0 on pci0
                              isa0: <ISA bus> on isab0
                              ahci0: <Intel Lynx Point-LP AHCI SATA controller> port 0x50b0-0x50b7,0x50a0-0x50a3,0x5090-0x5097,0x5080-0x5083,0x5060-0x507f mem 0xa8219000-0xa82197ff irq 19 at device 31.2 on pci0
                              ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier not supported
                              ahcich1: <AHCI channel> at channel 1 on ahci0
                              acpi_button0: <Sleep Button> on acpi0
                              acpi_button1: <Power Button> on acpi0
                              acpi_tz0: <Thermal Zone> on acpi0
                              acpi_tz1: <Thermal Zone> on acpi0
                              atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
                              atkbd0: <AT Keyboard> irq 1 on atkbdc0
                              kbd0 at atkbd0
                              atkbd0: [GIANT-LOCKED]
                              uart: ns8250: UART FCR is broken
                              uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
                              uart: ns8250: UART FCR is broken
                              uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
                              est0: <Enhanced SpeedStep Frequency Control> on cpu0
                              cpufreq0: <CPU frequency control> on cpu0
                              cpufreq1: <CPU frequency control> on cpu1
                              Timecounter "TSC" frequency 1396766503 Hz quality 1000
                              Timecounters tick every 1.000 msec
                              ugen0.1: <Intel XHCI root HUB> at usbus0
                              ugen1.1: <Intel EHCI root HUB> at usbus1
                              uhub0 on usbus0
                              uhub1 on usbus1
                              uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
                              uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
                              ZFS filesystem version: 5
                              ZFS storage pool version: features support (5000)
                              hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
                              hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0
                              pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0
                              hdacc1: <Realtek ALC662 rev3 HDA CODEC> at cad 0 on hdac1
                              hdaa1: <Realtek ALC662 rev3 Audio Function Group> at nid 1 on hdacc1
                              pcm1: <Realtek ALC662 rev3 (Rear Analog)> at nid 20 and 24 on hdaa1
                              Trying to mount root from zfs:pfSense/ROOT/default []...
                              ada0 at ahcich1 bus 0 scbus0 target 0 lun 0
                              ada0: <SSD 32GB Q0927A> ACS-2 ATA SATA 3.x device
                              ada0: Serial Number 2021011201184
                              ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
                              ada0: Command Queueing enabled
                              ada0: 30029MB (61500000 512 byte sectors)
                              uhub0: 13 ports with 13 removable, self powered
                              uhub1: 2 ports with 2 removable, self powered
                              ugen0.2: <vendor 0x1a40 USB 2.0 Hub> at usbus0
                              uhub2 on uhub0
                              uhub2: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 1> on usbus0
                              Root mount waiting for: usbus0 usbus1
                              ugen1.2: <vendor 0x8087 product 0x8000> at usbus1
                              uhub3 on uhub1
                              uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1
                              uhub2: 4 ports with 4 removable, self powered
                              uhub3: 8 ports with 8 removable, self powered
                              CPU: Intel(R) Celeron(R) 2955U @ 1.40GHz (1396.77-MHz K8-class CPU)
                              Origin="GenuineIntel" Id=0x40651 Family=0x6 Model=0x45 Stepping=1
                              Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
                              Features2=0x4ddaebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,XSAVE,OSXSAVE,RDRAND>
                              AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
                              AMD Features2=0x21<LAHF,ABM>
                              Structured Extended Features=0x2603<FSGSBASE,TSCADJ,ERMS,INVPCID,NFPUSG>
                              Structured Extended Features3=0x9c000600<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
                              XSAVE Features=0x1<XSAVEOPT>
                              VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
                              TSC: P-state invariant, performance statistics
                              ichsmb0: <Intel Lynx Point-LP SMBus controller> port 0x5040-0x505f mem 0xa8218000-0xa82180ff irq 18 at device 31.3 on pci0
                              smbus0: <System Management Bus> on ichsmb0
                              wg0: changing name to 'tun_wg0'
                              tun_wg0: link state changed to UP
                              lo0: link state changed to UP
                              re0: link state changed to UP
                              re1: link state changed to UP
                              pflog0: promiscuous mode enabled
                              tun_wg0: link state changed to DOWN
                              wg0: changing name to 'tun_wg0'
                              tun_wg0: link state changed to UP
                              Limiting ICMPv6 destination unreachable output from 109 to 99 packets/sec

                              G 1 Reply Last reply Reply Quote 0
                              • G Offline
                                GTA_doum @GTA_doum
                                last edited by GTA_doum

                                And this is dmesg after deleting the loader.conf.local file. Sorry for reposts, the previous dmesg showed many boots, but this last time, only the last boot, so I got confused and took me a while to make sense out of all those dmesg outputs.

                                ---<<BOOT>>---
                                Copyright (c) 1992-2024 The FreeBSD Project.
                                Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
                                The Regents of the University of California. All rights reserved.
                                FreeBSD is a registered trademark of The FreeBSD Foundation.
                                FreeBSD 15.0-CURRENT #21 RELENG_2_8_1-n256095-47c932dcc0e9: Thu Aug 28 16:27:48 UTC 2025
                                root@pfsense-build-release-amd64-1.eng.atx.netgate.com:/var/jenkins/workspace/pfSense-CE-snapshots-2_8_1-main/obj/amd64/AupY3aTL/var/jenkins/workspace/pfSense-CE-snapshots-2_8_1-main/sources/FreeBSD-src-RELENG_2_8_1/amd64.amd64/sys/pfSense amd64
                                FreeBSD clang version 19.1.5 (https://github.com/llvm/llvm-project.git llvmorg-19.1.5-0-gab4b5a2db582)
                                VT(efifb): resolution 800x600
                                CPU: Intel(R) Celeron(R) 2955U @ 1.40GHz (1396.81-MHz K8-class CPU)
                                Origin="GenuineIntel" Id=0x40651 Family=0x6 Model=0x45 Stepping=1
                                Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
                                Features2=0x4ddaebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,XSAVE,OSXSAVE,RDRAND>
                                AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
                                AMD Features2=0x21<LAHF,ABM>
                                Structured Extended Features=0x2603<FSGSBASE,TSCADJ,ERMS,INVPCID,NFPUSG>
                                XSAVE Features=0x1<XSAVEOPT>
                                VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
                                TSC: P-state invariant, performance statistics
                                real memory = 4294967296 (4096 MB)
                                avail memory = 3989311488 (3804 MB)
                                Event timer "LAPIC" quality 600
                                ACPI APIC Table: <ALASKA A M I >
                                FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
                                FreeBSD/SMP: 1 package(s) x 2 core(s)
                                random: registering fast source Intel Secure Key RNG
                                random: fast provider: "Intel Secure Key RNG"
                                random: unblocking device.
                                WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS.
                                WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS.
                                ioapic0 <Version 2.0> irqs 0-39
                                Launching APs: 1
                                TCP_ratelimit: Is now initialized
                                ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
                                ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                                module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80758a00, 0) error 1
                                ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
                                ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                                module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80758ab0, 0) error 1
                                ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
                                ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                                module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80758b60, 0) error 1
                                iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
                                iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
                                module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff807781d0, 0) error 1
                                iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
                                iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
                                module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80778280, 0) error 1
                                iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
                                iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
                                module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80778330, 0) error 1
                                random: entropy device external interface
                                wlan: mac acl policy registered
                                kbd1 at kbdmux0
                                WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0.
                                efirtc0: <EFI Realtime Clock>
                                efirtc0: registered as a time-of-day clock, resolution 1.000000s
                                netgate0: <unknown hardware>
                                netgate0: version: 0.1
                                smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe
                                smbios0: Version: 2.8, BCD Revision: 2.8
                                acpi0: <ALASKA A M I >
                                acpi0: Power Button (fixed)
                                cpu0: <ACPI CPU> on acpi0
                                hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
                                Timecounter "HPET" frequency 14318180 Hz quality 950
                                Event timer "HPET" frequency 14318180 Hz quality 550
                                Event timer "HPET1" frequency 14318180 Hz quality 440
                                Event timer "HPET2" frequency 14318180 Hz quality 440
                                Event timer "HPET3" frequency 14318180 Hz quality 440
                                Event timer "HPET4" frequency 14318180 Hz quality 440
                                Event timer "HPET5" frequency 14318180 Hz quality 440
                                Event timer "HPET6" frequency 14318180 Hz quality 440
                                atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
                                atrtc0: Warning: Couldn't map I/O.
                                atrtc0: registered as a time-of-day clock, resolution 1.000000s
                                Event timer "RTC" frequency 32768 Hz quality 0
                                attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
                                Timecounter "i8254" frequency 1193182 Hz quality 0
                                Event timer "i8254" frequency 1193182 Hz quality 100
                                Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
                                acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
                                pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
                                pci0: <ACPI PCI bus> on pcib0
                                vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0xa7c00000-0xa7ffffff,0xb0000000-0xbfffffff irq 16 at device 2.0 on pci0
                                vgapci0: Boot video device
                                hdac0: <Intel Haswell HDA Controller> mem 0xa8214000-0xa8217fff irq 16 at device 3.0 on pci0
                                xhci0: <Intel Panther Point USB 3.0 controller> mem 0xa8200000-0xa820ffff irq 21 at device 20.0 on pci0
                                xhci0: 32 bytes context size, 64-bit DMA
                                xhci0: Port routing mask set to 0xffffffff
                                usbus0 on xhci0
                                usbus0: 5.0Gbps Super Speed USB v3.0
                                pci0: <simple comms> at device 22.0 (no driver attached)
                                hdac1: <Intel Lynx Point-LP HDA Controller> mem 0xa8210000-0xa8213fff irq 22 at device 27.0 on pci0
                                pcib1: <ACPI PCI-PCI bridge> irq 18 at device 28.0 on pci0
                                pci1: <ACPI PCI bus> on pcib1
                                re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x4000-0x40ff mem 0xa8104000-0xa8104fff,0xa8100000-0xa8103fff irq 18 at device 0.0 on pci1
                                re0: Using 1 MSI-X message
                                re0: turning off MSI enable bit.
                                re0: Chip rev. 0x54000000
                                re0: MAC rev. 0x00100000
                                miibus0: <MII bus> on re0
                                rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
                                rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
                                re0: Using defaults for TSO: 65518/35/2048
                                re0: Ethernet address: 00:e0:4c:33:1f:c4
                                re0: netmap queues/slots: TX 1/256, RX 1/256
                                pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
                                pci2: <ACPI PCI bus> on pcib2
                                re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xa8004000-0xa8004fff,0xa8000000-0xa8003fff irq 16 at device 0.0 on pci2
                                re1: Using 1 MSI-X message
                                re1: turning off MSI enable bit.
                                re1: Chip rev. 0x54000000
                                re1: MAC rev. 0x00100000
                                miibus1: <MII bus> on re1
                                rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1
                                rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
                                re1: Using defaults for TSO: 65518/35/2048
                                re1: Ethernet address: 00:e0:4c:33:1f:c5
                                re1: netmap queues/slots: TX 1/256, RX 1/256
                                ehci0: <Intel Lynx Point-LP USB 2.0 controller> mem 0xa821a000-0xa821a3ff irq 23 at device 29.0 on pci0
                                usbus1: EHCI version 1.0
                                usbus1 on ehci0
                                usbus1: 480Mbps High Speed USB v2.0
                                isab0: <PCI-ISA bridge> at device 31.0 on pci0
                                isa0: <ISA bus> on isab0
                                ahci0: <Intel Lynx Point-LP AHCI SATA controller> port 0x50b0-0x50b7,0x50a0-0x50a3,0x5090-0x5097,0x5080-0x5083,0x5060-0x507f mem 0xa8219000-0xa82197ff irq 19 at device 31.2 on pci0
                                ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier not supported
                                ahcich1: <AHCI channel> at channel 1 on ahci0
                                acpi_button0: <Sleep Button> on acpi0
                                acpi_button1: <Power Button> on acpi0
                                acpi_tz0: <Thermal Zone> on acpi0
                                acpi_tz1: <Thermal Zone> on acpi0
                                atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
                                atkbd0: <AT Keyboard> irq 1 on atkbdc0
                                kbd0 at atkbd0
                                atkbd0: [GIANT-LOCKED]
                                uart: ns8250: UART FCR is broken
                                uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
                                uart: ns8250: UART FCR is broken
                                uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
                                est0: <Enhanced SpeedStep Frequency Control> on cpu0
                                cpufreq0: <CPU frequency control> on cpu0
                                cpufreq1: <CPU frequency control> on cpu1
                                Timecounter "TSC" frequency 1396766529 Hz quality 1000
                                Timecounters tick every 1.000 msec
                                ugen1.1: <Intel EHCI root HUB> at usbus1
                                ugen0.1: <Intel XHCI root HUB> at usbus0
                                uhub0 on usbus1
                                uhub1 on usbus0
                                uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
                                uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
                                ZFS filesystem version: 5
                                ZFS storage pool version: features support (5000)
                                hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
                                hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0
                                pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0
                                hdacc1: <Realtek ALC662 rev3 HDA CODEC> at cad 0 on hdac1
                                hdaa1: <Realtek ALC662 rev3 Audio Function Group> at nid 1 on hdacc1
                                pcm1: <Realtek ALC662 rev3 (Rear Analog)> at nid 20 and 24 on hdaa1
                                Trying to mount root from zfs:pfSense/ROOT/default []...
                                ada0 at ahcich1 bus 0 scbus0 target 0 lun 0
                                ada0: <SSD 32GB Q0927A> ACS-2 ATA SATA 3.x device
                                ada0: Serial Number 2021011201184
                                ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
                                ada0: Command Queueing enabled
                                ada0: 30029MB (61500000 512 byte sectors)
                                uhub1: 13 ports with 13 removable, self powered
                                uhub0: 2 ports with 2 removable, self powered
                                ugen0.2: <vendor 0x1a40 USB 2.0 Hub> at usbus0
                                uhub2 on uhub1
                                uhub2: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 1> on usbus0
                                Root mount waiting for: usbus0 usbus1
                                ugen1.2: <vendor 0x8087 product 0x8000> at usbus1
                                uhub3 on uhub0
                                uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1
                                uhub2: 4 ports with 4 removable, self powered
                                uhub3: 8 ports with 8 removable, self powered
                                CPU: Intel(R) Celeron(R) 2955U @ 1.40GHz (1396.77-MHz K8-class CPU)
                                Origin="GenuineIntel" Id=0x40651 Family=0x6 Model=0x45 Stepping=1
                                Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
                                Features2=0x4ddaebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,XSAVE,OSXSAVE,RDRAND>
                                AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
                                AMD Features2=0x21<LAHF,ABM>
                                Structured Extended Features=0x2603<FSGSBASE,TSCADJ,ERMS,INVPCID,NFPUSG>
                                Structured Extended Features3=0x9c000600<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
                                XSAVE Features=0x1<XSAVEOPT>
                                VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
                                TSC: P-state invariant, performance statistics
                                ichsmb0: <Intel Lynx Point-LP SMBus controller> port 0x5040-0x505f mem 0xa8218000-0xa82180ff irq 18 at device 31.3 on pci0
                                smbus0: <System Management Bus> on ichsmb0
                                wg0: changing name to 'tun_wg0'
                                tun_wg0: link state changed to UP
                                re0: link state changed to UP
                                re1: link state changed to UP
                                re0: link state changed to DOWN
                                lo0: link state changed to UP
                                re1: link state changed to DOWN
                                pflog0: promiscuous mode enabled
                                re0: link state changed to UP
                                re1: link state changed to UP
                                re0: link state changed to DOWN
                                re0: link state changed to UP
                                tun_wg0: link state changed to DOWN
                                wg0: changing name to 'tun_wg0'
                                tun_wg0: link state changed to UP

                                1 Reply Last reply Reply Quote 0
                                • stephenw10S Offline
                                  stephenw10 Netgate Administrator
                                  last edited by

                                  Hmm, nothing obvious there then. Both NICs link UP OK using both drivers.

                                  I would disable the on-board audio hardware since that only consuming resources but it's unlikely to be causing this.

                                  Anything in the system log after boot when using the alternative driver?

                                  G tinfoilmattT 2 Replies Last reply Reply Quote 0
                                  • G Offline
                                    GTA_doum @stephenw10
                                    last edited by

                                    @stephenw10 I tried to look into system.log, but since we rebooted many times, I'm not sure what to look for. The log is rather long for this morning.

                                    1 Reply Last reply Reply Quote 0
                                    • tinfoilmattT Offline
                                      tinfoilmatt @stephenw10
                                      last edited by

                                      Just stating the obvious that the wg0 flaps immediately precede and immediately follow the multiple Realtek NIC flaps.

                                      @GTA_doum Is the Wireguard package installed on the system at the first site?

                                      G 1 Reply Last reply Reply Quote 0
                                      • G Offline
                                        GTA_doum @tinfoilmatt
                                        last edited by GTA_doum

                                        @tinfoilmatt Tes, both sites have WireGuard installed. It is used occasionaly by users being outside of the office.

                                        1 Reply Last reply Reply Quote 0
                                        • stephenw10S Offline
                                          stephenw10 Netgate Administrator
                                          last edited by

                                          So what exactly failed after enabling the new driver? DHCP fails for LAN clients?

                                          1 Reply Last reply Reply Quote 0
                                          • First post
                                            Last post
                                          Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.