Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    QOS in the router, or the switch

    Scheduled Pinned Locked Moved Traffic Shaping
    4 Posts 3 Posters 5.8k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • R
      robinBones
      last edited by

      When dealing with VOIP, should I setup the QOS rules in pfsense,
      or would I be better off setting up those rules in the switch?

      We are moving to manged switches soon.
      We did not have the option before.

      1 Reply Last reply Reply Quote 0
      • D
        depster
        last edited by

        Setting up QOS in the router would be the utmost importance if you are using a internet VOIP provider.

        Switch based QOS would be important but not necessary in all cases. This ultimately depends on internal traffic load and quantity of users.

        More details about your setup and usage would help in clarifying.

        1 Reply Last reply Reply Quote 0
        • R
          robinBones
          last edited by

          Well we are moving to procurve managed switches.

          1x 48 gigabit switch, with our servers, router, some soft phone users.
          Servers are exchange / Active directory, development, and some intranet stuff. nothing public facing.
          we will have about 24 of the ports in use at this time.

          we are also going to have a 48 Port 10/100 managed POE switch. this switch will power all the users phones, and their pc's will be connected via the phones switch. All the phone traffic other than the few softphones will be on a VLAN. The 10/100 has a 1000 uplink to the main switch. we will have 19 Users on this switch to start off with.

          I was thinking on the switch I could prioritize the VLAN, but i guess the router needs to be using QOS to make best use of the wan connection?

          1 Reply Last reply Reply Quote 0
          • M
            MageMinds
            last edited by

            You need both … QoS on the router if you're going to use a VoIP Internet Provider and you'll need internal QoS into your switch to make sure your VLAN is prioritize over other traffic.

            If you're IP/PBX gets it's PTSN access with a POTS or a T1/PRI the router QoS is not a necessity, but QoS is always a good thing even if you do not use VoIP. Just to prioritize HTTP(S) over FTP is a good thing to provide a good fast experience to your users.

            At work I'm stuck with a SonicWALL without that much QoS but my IP/PBX does not use Internet for PSTN access, only external softphone here and there, not a big deal and the router can manage... But all my internal Layer2&3 switches have QoS enabled.

            1 Reply Last reply Reply Quote 0
            • First post
              Last post
            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.